|
|
MOVABLE CABLE STRIPPER
-motive power : 3 hp (1 or 3 phase)
- Voltage : 220 v / 340v
- electric power : 2.2 kw
- Product Hight : 1200 mm
- Product Width : 580 mm
- Product Length : 900 mm
- Product Weight : 450 kg
Applying three different types of mechanism, the machine can strip exterior covering and interior covering of wire in accordance with the shape and size of scrap wire or defective wire.
For more detail, the machine is equipped with two parts being put together to make the stripping process to be effective: thickness selective stripping part and thickness adjustable stripping part. The thickness selective stripping part can cut and strip the interior covering of wire by selecting the thickness of interior wiring inserted into wire with the upper pressure roller of exterior covering cutting part repeatedly opening and closing. The thickness adjustable stripping part can strip the interior wiring by adjusting the cut depth according to the thickness of interior wiring.
|
|
General features
- Mark, strip and cut multiple gauge wire/cable in a fully automatic, high speed, computer controlled operation.
- Permanent, high contrast surface marks without damage on all insulations specified in SAE Aerospace Standards.
- Mark without masks...virtually any character, any font, any symbol.
- Strip with zero defects/damage to the wire core.
- Industry standard wire transport.
- Compliant with SAE Aerospace Standards.
|
|
|
|
|
|
PowerStrip 9500 automatic cutting and stripping machine for processing wires up to 12 mm (0.47'') in diameter with pull-off lenghts up to 200 mm (7.87'') on the right wire end (leading end) and 100 mm (3.94'') on the left end (trailing end).
Various models of the PowerStrip 9500 are available - from automatic processing of coaxial cables / shielded cables with rotary incision unit, to special Kevlar cutting head or integrated saw (e.g. for succoform or POF cables). Wire sizes from 0.03 to 25 mm² (AWG 32 - 4) can easily be cut, stripped and slit with unmatched precise Schleuniger stripping quality and high processing speed.
A multiple-blade system on the cutter head allows to use of up to 3 pairs of blades which can easily handle most cutting, stripping and slitting requirements.
The PowerStrip 9500 and all other Schleuniger automatic cut & strip machines can be integrated with various pre- and post processing equipment for prefeeding, marking / inkjet printing, coiling and stacking in an automatic production line. Programming can be either done directly on the PowerStrip 9500 itself or with the PC software Cayman with an easy-to-use graphical editor (WYSIWYG).
|
|
|
|
|
|
Schleuniger UniStrip machines have been proven thousands of times to process wires, cables and a wide variety of special cables. They all operate with extremely fast cycle times and feature a universal blade system that eliminates time consuming change-overs.
Depending on the model, UniStrip machines process wires and cables from 3.2 mm (0.12'') outer diameter up to 9 mm (0.35''). For flat cable processing with the fully programmable UniStrip 2600 or UniStrip 2700 the maximum material width is 11 mm (0.43''), respectively 63 mm (2.48'').
The most flexible machine, the UniStrip 2600 can process many unique applications and wire / cable types, including discrete wire from 0.03 mm2 up to 16 mm2 (AWG 32 - 6), power cords (even multiple conductors with different lengths; all steps processed in one cycle), multi-conductor cables, flat cables and more. Programming the UniStrip 2600 is simple with its cable library (programmable in mm2 and AWG), proven menu-guided software and a graphical user interface.
|
|
Kappa 310 – Cutting to length and stripping
Introduction
Power, performance and a new type of sensors are the three key features of the fully automatic Kappa cutting and stripping machines. Simple, intuitive controls allow these machines to be used efficiently in daily operation.
Key features:
- Broader processing range with a diversity of options and solutions
- Innovative sensors to aid in setup and to monitor processing
- Intuitive, flexible and simple touch-screen operation
- Simple integration of upstream and downstream equipment
|
|
dps 272 – Coiler
Introduction
The Komax dps 272 coiler is the perfect choice for coiling over-length cables. With its dual-drum design and automatically sliding safety cover, processing is fast, reliable and safe. You can enter any setting you wish for the inside diameter (100mm to 300mm) and outside diameter (maximum of 400mm) of the coil. All specific settings for the coiler can be entered conveniently from the OMI. Gentle processing, a user-friendly design and a large range of possible uses are what set this model apart.
Key features:
- High-performance coiler thanks to dual drum design
- Gentle coiling of wire
- Easy to operate thanks to OMI
- Large processing ra
|
|
Thermal wire stripping with accuracy and quality:
This technique allows for wires insulated with TEFLON, TEFZEL, KAPTON to be stripped without damaging the core.
The insulation is stripped cleanly and quickly, readying the wire for crimping or soldering.
It is also possible to thermal strip low-temperature materials like PVC, Nylon and Polyethylene without the insulation slugs sticking to the stripper or the conductor.
The tip temperature can be adjusted from 0oF (0oC) to 1436oF (788oC).
Ours pliers are ergonomically designed to be pleasant and comfortable to handle. In addition to being size adjustable, their electrodes can be easily replaced in the event of breakage (pliers and power unit are supplied as separate items).
Thanks to the different electrodes, the pliers can be used for different works. .
a a a
TEDT2
EEDT2
EPNP
New: 3 kinds of pliers which adapted for gauges from AWG 8 to 40.
|
|
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
This model uses a completely new principle and is particularly suitable to cutting flexible hoses,
feeding electrical cables and plastic covered hoses…..
One by one or in small batches.
Easily transportable, the only power supply required is a simple 220 Volt single phase 10 Amp.
socket. This model is ideal for on-site work.
Technical specifications:
à Maximum cutting diameter : 50 mm.
à Bench-top model.
à Manual control.
à Single lever to bend and cut hoses.
à 2.1 kW - 230V - 50Hz single phase electric motor
à During the machine work, the control is held down by the operator.
à Bevelled cutting blade: Ø 200 x 1.6 x 30 mm.
à Dimensions: H 530 x W 430 x L 550 mm.
à Weight: 17 Kg.
|
|
Product Facts
n Low applied costs
n Terminates most jacketed
cable
n Straight (180°) or rightangle
(90°) wire dress
n Microprocessor controlled
n Stored program capability
n Selective termination of
connector positions
n Rapid tooling changeover
for different connector types
n Manufactured under an
ISO 9001 Certified Quality
System
|
|
|
Units for removing the cable isolation or for removing coatings and lengh measuring devices.
|
|
|
This bench shearing machine cuts plastic covers and raceways up to 125 mm wide perfectly without burring.
|
|
|
|
see the results for the following category : 
