|
|
|
|
|
|
The Modec standard box van is constructed using built aluminium framed GRP side panels, a one piece GRP oulded roof and fully integrated aluminium base frame and floor. This includes hinged near and offside entry doors, a stainless steel rear frame with a wide latch-lokable shutter, plus grab handles on each rear pillar.
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
MEGA Multitruck Van, diesel or electric, perfect in urban and rural zones as well as in closed sites
With its 3m3 capacity the Mega Van is the ideal partner for your transport solutions in urban and rural zones as well as in closed sites.
Available in combustion engine or electric versions the MEGA Van represents a very economical choice in terms of initial investment and running costs.
ergonomically designed, the MEGA Van has a very spacious cab, a low loading height (approx. 38cm) that make light work of all loading and unloading operations.
Highly manouevrable the Mega Van is ideal for going in and out of city centres and for parking
|
|
Tipper
Maximum payload : 500 kg in the deck
SPECIFICATIONS
(For base and cabin, please see chassis base datasheet)
Aluminium tipper
Hydraulic piston
Safety feature: non-return valve and safety stand
2 side loading, lockable panels
2 tool holders
Maximum unloading height: 1.40m
Loading height:
- Side loading (with open panels) : 1.40m
- Rear loading: 1.70m
Volume Capacity: 1.80 m3
OPTIONS
Neting cover
|
|
Tipping Deck
Maximum deck payload – 700Kg
Aluminium cargo deck
Hydraulic piston
Safety feature: non-return valve and safety standFixed side boards, opening and retractable rear side board
Fixed side panels, dropside rear panel
OPTIONS
Removable mesh container
Canvas covering for mesh container
Skid mounted electric high-pressure washer (see separate datasheet)
OTHER OPTIONS
3 removable dropside panels
Maximum payload :
- 200 Ah battery = 700 kg
- 240 Ah battery = 600 kg
- 300 Ah battery = 500 kg
TIPPER DECK SURFACE CAPACITY 1.96 M2
Mesh container option
|
|
|
|
|
|
Modec is a revolutionary zero emission commercial vehicule. Economically and envoronmentally viable, the vehicule is purpose built from the ground up.
The modec is perfect for the demanding urban environment. With a 5,5 tonne GVW, this silent truck is capable of travelling at a swift 50mph over, a range of up to 100 miles or 60 miles.
The Modec Chassis Cab has been designed with the built in strength and flexibility that makes it suitable for a wide range of applications and conversions
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
Electric Vehicle ATX280E
Here is the answer for the professionals and organizations that are searching for a compact electric utility vehicle with great power and resistance, zero emission and a superlative load capacity. No compromises were made building this machine able to load up to 1000 kg on the loading bed and tow 3000 kg without problems.
ATX280E is an outstanding electric utility vehicle with no competitors: 6 kW SEM excitation engine, double speed mode, engine braking system with energy recovery, full floating rear axle, auxiliary cooling electrofan for jobs in tough conditions, best in class 600 A controller, 24x2 V removable high performance cells and on-board high frequency charger to plug everywhere.
|
|
|
|
|
|
Modec is a revolutionary zero emission commercial vehicule. Economically and envoronmentally viable, the vehicule is purpose built from the ground up.
The modec is perfect for the demanding urban environment. With a 5,5 tonne GVW, this silent truck is capable of travelling at a swift 50mph over, a range of up to 100 miles or 60 miles.
The Modec standerd dropside vehicule is fitted with an entry step on both sides and a chequer-plate non-slip walkway platform, is located behind the cab, for access to the cab entry door
EQUIPMENT AND SPECIFICATIONS
MOTOR
Maximum power 102hp
Maximum torque 300Nm
CO2emissions Zero g/km
TRANSMISSION
PRND (Park, Reverse, Neutral, Drive) clutchless transmission
BRAKING SYSTEM
Front 4 Piston Calipers
Rear 254mm Duo Servo Drum
ABS (Anti-lock Braking System) Standard
EBD (Electronic Braking Distribution) Standard
Regenerative braking Standard
WHEELS AND TYRES
Wheels 17.5x6 Steel
Tyres 205/75 R 17.5 10PR
(Regroovable)
PERFORMANCE
Maximum speed (speed limited) 50 mph
CAPACITY
Cargo capacity 2 Tonnes
WEIGHTS
Kerb weight 3000kg
Gross vehicle weight 5490kg
Maximum body/payload 2500kg
STEERING
Electro-hydraulic power assisted Standard
Turning circle (kerb-to-kerb) 10.8m
Steering wheel turns lock-to-lock 4.6
SUSPENSION
Front: Independent with roll control and anti-dive
Rear: Beam drive axle with trailing arms and Panhard rod
Coil spring or air option available
OTHER STANDARD FEATURES
• Electric windows
• Electric mirrors
• I-Pack driver information display
OPTIONS
• Tilt sunroof
• Battery options available
• Left hand drive
|
|
Electric Vehicle for Waste Collecting ATX200E AR
The ATX E range of Alkè electric vehicles includes the AR version, a special machine equipped with waste collection body, designed for use in cities and towns, sport centres, railway stations, airports, camping sites and tourist villages.
The AR version has a waste collection body built with anti-corrosion aluminium and may be integrated with an optional automatic bin lifting system for 120 and 240 litre bins. The waste body has a 2 cubic metres capacity (410 kg of nominal capacity) with a tipping angle of 90° that allows the waste to be dumped directly into the auto-compacting machines.
|
|
MEGA Multitruck Chassis Cab, with advantageous body build dimensions!
The choice is yours. Front wheel drive, aluminium chassis, with advantageous body build
dimensions, you have at your disposal the best tools to build your MEGA Multitruck.
Whether it be on a Chassis base or a Pick up you are able to create your own build according
to your transport needs. You can decide between a combustion engine or an electric motor
depending on the environment and your travel plans. In the Pick up version the loading volume can be as much as 3m3.
The MEGA Chassis Cab or Pick up: your imagination has no limits
|
|
MEGA Multitruck Tipper, Highly versatile.
Highly versatile, the MEGA Tipper has been developed for all types of proximity transport. It appeals through its manoeuvrability and its design.
The tipper raises to 43°, has storage space under the tipper, the tipper side panels are of aluminium. It is also equipped with the largest cab in its category, that enables the comfortable and safe seating of two operators. With the optional cage the load volume can be as much as 2.3 m3 allowing a great deal of autonomy to the street and garden cleaning teams.
The diesel engine coupled with an automatic CVT transmission provides flexibility in use as well as a low fuel consumption (approx. 4.4 l / 100 km).
The MEGA Tipper: versatility and low running costs
Tipping Angle: 43° to ± 5°
Operation Time: < 8 seconds
Electric/hydraulic pump: 12 V - 1800 W
Telescopic hydraulic ram: diameter 45mm
Aluminium tipper with detachable drop down sides
|
|
Mega Multitruck Skip Tipper
Equipped with an aluminium skip with a 2m3 capacity, a double lever hydraulic system, tipping to an angle of 90° and a low loading height, that makes loading, unloading and cleaning of the skip very simple.
With a width of 1.4m the MeGA skip tipper can go into the narrowest of streets without compromising the carrying capacity.
The automatic CVT transmission specially developed for small trips provides driver comfort and a reduced maintenance. And because the waste bins are often situated at either side of the road, the flat cabin floor enables the driver to leave the cab from either side.
Silent, the electric version is ideally suited to early morning work and to busy pedestrian streets.
The MEGA skip tipper: loading height of only 1m
Tipping Angle: approx. 90º
Operation Time: < 8 seconds
Electric / hydraulic pump: 12 V - 700 W
Remote switch on lead
High resistance aluminium skip
Access door on right side of skip
|
|
Electronics system components are increasingly subject
to electrical charges and other negative factors.
Environmental factors such as electromagnetic fields,
humidity and radioactive radiation can damage
and even destroy electronic components.
People are also subject to the formation of electrostatic
charges which are then discharged near conductive objects.
The relative compensating currents and electromagnetic fields
surrounding electrostatically charged people can damage
or even destroy electronic components.
Considering the electrostatic sensitivity of electronic
components (see table below), it is essential to adopt
precise protection measures.
|
|
Absopulse's modular power systems are comprised of plug-in (Eurocard) converter and rectifier modules, and 19" and 23" shelves including motherboards and power distribution panels. These modular designs allow for easy servicing in the field.
Our modular systems offer:
- Output power up to 5kW per 19" shelf
- Almost any input/output and mechanical configuration
- N+1 redundant operation and hot-swap
- Multiple outputs
- Expandability - as power requirements increase, more modules can be added.
- Reconfiguration option
|
|
|
A range of multi function products specifically designed to suit the requirements of all combined heat and power, co-generation, diesel and gas engine generator applications. This high quality product portfolio offers the generator set manufacturer and panel builder a flexible mix of contemporary and traditional products, including a comprehensive range of generator set controllers, integrated digital power metering, and a one stop solution package of measurement, protection and control instrumentation.
|
|
| ... products without technical information |
| |
|
|
|
|
80 Models: 16 to 1000 Vdc, 20 to 2700 Adc
FEATURES:
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz to 400 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics TS SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. TS SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
|
|
|
|
Features:
54 Models: 5 to 1000 Vdc, 3 to 900 Adc
Series and parallel master/slave operation
High dielectric withstand: 2500 Vac
50 Hz and 60 Hz input frequency
All user interface circuitry referenced to earth ground
OVT and OCT shutdown standard
Automatic V/I crossover
RS232 interface with SCPI commands
Optional IEEE-488, RS485, and Ethernet programming
Front panel potentiometers for stepless rotary control
Front panel calibration
User friendly controls and indicators
Remote Interface Software with self-teaching features
Drivers: Certified LabWindows/CVI and LabVIEW for GPIB, Serial, and TCP/IP communications
Load dependent cooling
High power factor
CE Mark
Magna-Power Electronics PQ SERIES combines the best of dc power processing with multiprocessor embedded control. A combination of high and medium frequency power processing technologies improves response, shrinks package size, and reduces cost. PQ SERIES power supplies are current fed and are more tolerant to abusive loads than conventional switching power supplies.
|
|
GE's Digital EnergyTM GT Series UL UPS series provides high quality power protection in a cost effective package. The GT Series UL is a compact, true VFI (Voltage and Frequency Independent) on-line double conversion high performance device.
The UPS is designed to support and protect mission-critical applications and provide the user with high reliability power regardless of the mains power quality condition. All GT Series UL UPS are microprocessor controlled and equipped with RS232 communication and optional SNMP interfacing capabilities for all major operating systems. Extended run times are available with the optional battery pack.
|
|
The Powerware 5115 Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware 5115 Rackmount UPS additionally offers the best UPS power protection against five of the nine common power quality problems.
The slim design and wide range of UPS system installation possibilities make the Powerware 5115 Rackmount UPS the most versatile UPS power quality solution available.
|
|
| ... products without technical information |
| |
... see all the products in the category
UPSs
|
|
This type equipments use to activate the regular flowing of poor-flow materials through away from outlet of the silos. Bin activators produce in several models (as OT-600, OT-1000, OT-1200, and OT-1500) depending on the different sized silos.
|
|
|
|
|
|
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 27° to 32 °C. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1,5" knockout hole to keep electrical control panels cool, clean and protected.
When the going gets tough...
Using vortex tube technology, cold air is generated by the Vortex A/C from the compressed air supply and is distributed throughout the enclosure. Since ambient air never enters the cabinet, it's perfect for harsh, dirty environments. In fact, the Vortex A/C features an optional "purge-air" port that, when opened, will provide a constant positive pressure inside the enclosure to purge the cabinet of any contaminated surrounding air. Withstanding extreme temperature conditions, the Vortex A/C will provide reliable cooling operation in environments up to 79° C.
|
|
Side installation coolers
* Powder coating similarly ral 7035
* Contact protection in accordance with DIN 31,001
* IP 24 to IP 54 (depending upon execution)
* Further technical details on inquiry
|
|
|
The thermoelectric units, with cooling power from 50W to 300W, represent an innovative solution for controlling temperature inside small enclosures or electronic equipment. They offer significant advantages: long life, easy installation, eco-friendliness, unaffected by vibration and capable of functioning when installed at any angle.
|
|
HXi™ Series Heat Exchanger
Our HXi™ Series air-to-air heat exchangers are designed primarily for cooling indoor and outdoor electronic enclosures. They use a double-sided impingement technology to significantly improve heat transfer performance while reducing heat exchanger size. Tests verify that the HXi™ heat exchanger is capable of dissipating twice the heat load of competitive heat exchangers at a comparable size.
Thermacore’s patented design makes the HXi™ Series a low-cost and high-performance alternative to conventional heat exchanger technologies. There are fewer moving parts for greater overall reliability. Standard units are available with 2, 4, 6 or 8 fans. Custom optional features such as alarms and temperature controls are also available. Units are UL recognized and meet Bellcore GR-487-CORE, NEMA 4 and NEMA 12 requirements.
|
|
cooling units
determining the cooling unit using charts
In order to select the unit best suited to your requirement, the values of three parameters are required: maximum ambient temlperature in the area where the switchboard is installed Te (max), the maximum temperature required in the enclosure Ts (max) and the amount of heat to be removed by the unit (Psyst.). Use the selection chart related to the reference temperature Ts which is closest to the required value. Read the Te value on the horizontal axis of the chart and draw a vertical line through this point. The intersections of this straight line and the power curves of the various units give the power that each unit can absorb in these
temperature conditions. Select a cooling unit with a power rating
immediately above the the Psyst. value to be removed.
|
|
|
The Peltier effect is a thermoelectric effect, named after the French physicist Jean Peltier. Respectively doped (n-type and p-type) semiconductor materials are used, which are alternately connected in series, each at two junctions. An electric current flowing through that system causes a change in the energy level of charge carriers, thus providing heat being absorbed at one junction and being evolved at the other.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
