|
|
Main advantages:
- Self or non self propelled
- Multimodal steering
- AGV or rail mounted system
- Hidraulic elevation system for palletized cargos
- Low noise level
- Perpendicular movements of the materials handled
- Maximum safety for operators and for the material handled
- Easy to operate... |
|
| ... products without technical information |
| |
The high-speed SMT connector Microspeed with the pitch 1.0mm is especially designed for modern board-to-board applications in telecom and datacom equipments with data rates up to 10 GBit/s. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. Two different signal contact arrangements are possible. For improved crosstalk parallel signal ports are recommended. A excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination area of the shield contacts is available in 2 options: SMT or THR (Thru Hole Reflow).
For fully automatic SMT assembly the connector features:
- Tape and reel packaging
- Black high-temperature insulator for fast and reliable visual recognition.
- Integral pick and place surface for easy grip with a vacuum pipette |
|
Tubular steel construction. Injury safe structure.
Base covered with a non-slip multi-fold wooden plate.
Panel resists damp, impact and scratching.
Two fixed + two pivoting wheels with brakes, complying with
European standard EN 1757-3 (Safety of handling trolleys). |
|
| These heavy duty platform trucks are offered in a vast choice of sizes and casters to answer the most varied needs as far as the required capacity and type of use are concerned. The 1.25" tubular handle can be inserted at any one end of the platform. Choice of a steel reinforced deck with two 2" x 1" rectangular channels running along its lenght for added strengt and rigidity or of varnished hard wood 3/4" thick. Fitted with 2 swivel and 2 rigid casters. Quality finish. Optional rubber bumpers may be installed at the steel platform corners. Additional tubular handles available. |
|
4403 Utility Platform Truck, 5" dia x 1 1/4" wide (12.7 cm x 3.2 cm) Rubber Casters, Crossbar Handle
Built for durability and efficient mobility of heavy loads.
Complete range of models for versatility.
Sturdy structural foam construction won%u2019t rust, dent, chip, peel, or splinter.
Virtually maintenance free.
Available in 1 or 2 crossbar handle versions to help maneuver loads easily.
9T06 Heavy-Duty Platform Convertible Wagon with 16" (40.6 cm) Pneumatic Wheels
Ideal for transporting heavy or bulky loads in manufacturing, industrial, and groundskeeping settings.
Constructed of a structural foam body.
All wagons come standard with a T-Bar Handle for pulling by hand, optional tow package allows for Pintle or Hook & Eye hitching methods.
A rear hitch allows training several wagons together to eliminate multiple trips.
16" (40.6 cm) pneumatic wheels
Increases capacity to 20 cu. ft. (.6m3) and helps keep small loads intact. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Presto PLP
Stand-on pallet truck
With robust fold-down driver platform, for longer travel distances and extended work cycles.
Foldable side guards. Optional fixed driver protected platform.
|
|
| The Linde Electric Pallet Truck with Rider Plattform T20SP offers convenience and safety with its innovative driver’s platform, set at a 45° angle. The standard electric steering and powerful 3kW-AC-motor can make a great difference in any warehouse. Active side stabilisers ensure perfect stability and road traction. All components have a service-friendly CAN bus structure that allows you to set each parameter individually for maximum handling performance on the T20SP. Service calls are needed only every 1000 hours of use or once a year. |
|
MP20X, MP20XV
Capacity: 2000kg
- Electric pallet truck with folding operator platform
- Side or rear protection models with fixed operator platform (MP20X)
- Combi MOSFET electronic control technology
- Yale AC Technology
- Ride-on or pedestrian operation
- Brushless power steering motor (MP20X)
- Rear fixed protection with fixed platform (MP20XV) |
|
TRAY FOR SKIP WASHING PLATFORM
In order to respect the environment, SECATOL present a special tray for the skip washing platform to hold back the waste waters.
The tray is placed under the front part of the platform and when lifting this front part, the tray can be removed.
The tray has the following equipments:
- 4 lifting eyes to facilitate the prehension.
- An overflow outlet to evacuate the clear waters after the settling and decanting of the waste waters |
|
SKIP WASHING PLATFORM
PATENTED EQUIPMENT
To facilitate the cleaning and washing of the SECATOL skip range
The SECANET skip washing platform has been designed to improve the cleanliness on the building sites by facilitating the cleaning and maintenance of the SECATOL range of skips.
The two ladders, the platform, the guardrail and the security handrail on the washing area make the skip washing platform a secured element to use.
All types of SECATOL skips can be placed onto the platform by means of different abutments.
The platform can easily be placed with a forklift truck or with a crane and can be fitted on the floor with pins on the feet.
The platform is easily washable and the mesh metal on the platform does not held back the washing waters. .
If needed, the washing platform can be supplied with a special tray to hold back the waste waters.
The skip washing platform is available in painted or galvanized version. |
|
Tool for Balconies (OBS)
TOOL "OBS" includes/understands:
A standard cast solid framework of platform PRM (module 2 F 1900)
A complete back extension with metal cross-pieces 2 telescopic feet allowing the support of the OBS either on the flagstone or on the veil
Complementary accessories:
Foot of recovery for fasteners in the openings
Closings of end
Under-rise for closings of end
Dimensional specifications:
Platform width 2.35 modulates 2 F 1900:
mini length 2.60 m - maximum 3.60 m
To carry out balconies:
width 1.60 m - ép. 20 cm
|
|
Nova TSL/TSP
The pedestrian stacker is a truck controlled with a tiller arm. Intended for stacking up to 4.8 metres.
With the driving platform folded the minimum aisle width is 2.3 metres. A ride-on driver requires a minimum aisle width of 3 metres. Permitted travel speed is limited to 6 km/h.
NOVA TSP: With platform
NOVA TSL: Without platform
Handling "open" load carriers.
|
|
Used in applications such as train doors or funicular or cable railways, these automatic doors play an important role in public transportation. Safety, reliability and comfort are enhanced; a train service according to the schedule is ensured while the passengers are protected against potentially harmful incidents.
Modular product structures allow to achieve customized installation solutions for automatic doors in public transport systems. |
|
| SIM-Small Instrumentation Modules-is a compact test and measurement platform for a wide range of applications. Unlike other modular systems, SIM offers complete front-panel as well as remote operation, allowing you to choose between manual and computer control. Up to eight instruments share the same mainframe which provides power, clock synchronization, communications, and module status. For additional versatility, you can cascade mainframes or other RS-232 instruments, and even operate modules outside the mainframe. |
|
MicroTCA Integrated Platforms
Kontron offers comprehensive pre-integration and pre-validation services for its MicroTCA open modular platforms. Available in different form factors, the line of Kontron OM MicroTCA platforms are reliable, scaleable and always the best configuration from the very start. |
|
DLR-1250 diver launch and recovery unit
This system is used for offshore diving applications, the maximum lowering capacity is 90 meters so it can be used for offshore platform diving operations as well. It consists of an A-frame with 2 approved man riding winches and a redundant electrical driven hydraulic power unit. All fits a 20" standard size container; even 2 off DLR-1250 will fit in one 20" container. One winch is used to lift and lower the dive bell, the other for the clump weight; a third optional winch can be used as a utility/tool winch. The function of the clump weight is to keep the dive bell straight and steady under water. In case of an emergency or breakdown of the wet bell winch the clump weight winch will be able to lift the dive bell and clump weight together.
Designed to fulfil with the requirements of Lloyds and meets UK HSE regulations for personnel lifting operations on offshore installations. The winches and A-frame are dedicated for personnel lifting suitable for diving operations and offered with Lloyds Register of Shipping (LRS) Design Appraisal Certificate and full material trace ability. They have passed the EC testing for these applications, i.e., both the winches and their technical files are in compliance with the requirements of the EC Machinery Directives. The DLR-1250 also complies with IMCA regulations and comes with an ATEX certificate as well.
The DLR-1250 is available for sale or lease.
|
|
... see all the products in the category
Winches
|
|
|
