|
|
Main advantages:
- Self or non self propelled
- Multimodal steering
- AGV or rail mounted system
- Hidraulic elevation system for palletized cargos
- Low noise level
- Perpendicular movements of the materials handled
- Maximum safety for operators and for the material handled
- Easy to operate... |
|
| ... products without technical information |
| |
Tubular steel construction. Injury safe structure.
Base covered with a non-slip multi-fold wooden plate.
Panel resists damp, impact and scratching.
Two fixed + two pivoting wheels with brakes, complying with
European standard EN 1757-3 (Safety of handling trolleys). |
|
| These heavy duty platform trucks are offered in a vast choice of sizes and casters to answer the most varied needs as far as the required capacity and type of use are concerned. The 1.25" tubular handle can be inserted at any one end of the platform. Choice of a steel reinforced deck with two 2" x 1" rectangular channels running along its lenght for added strengt and rigidity or of varnished hard wood 3/4" thick. Fitted with 2 swivel and 2 rigid casters. Quality finish. Optional rubber bumpers may be installed at the steel platform corners. Additional tubular handles available. |
|
4403 Utility Platform Truck, 5" dia x 1 1/4" wide (12.7 cm x 3.2 cm) Rubber Casters, Crossbar Handle
Built for durability and efficient mobility of heavy loads.
Complete range of models for versatility.
Sturdy structural foam construction won%u2019t rust, dent, chip, peel, or splinter.
Virtually maintenance free.
Available in 1 or 2 crossbar handle versions to help maneuver loads easily.
9T06 Heavy-Duty Platform Convertible Wagon with 16" (40.6 cm) Pneumatic Wheels
Ideal for transporting heavy or bulky loads in manufacturing, industrial, and groundskeeping settings.
Constructed of a structural foam body.
All wagons come standard with a T-Bar Handle for pulling by hand, optional tow package allows for Pintle or Hook & Eye hitching methods.
A rear hitch allows training several wagons together to eliminate multiple trips.
16" (40.6 cm) pneumatic wheels
Increases capacity to 20 cu. ft. (.6m3) and helps keep small loads intact. |
|
Herkulex - Aluminium-Transport Equipment :
* this truck can be used for almost any application eg. garage, office
* Delivery within Germany "free of charge"! |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Presto PLP
Stand-on pallet truck
With robust fold-down driver platform, for longer travel distances and extended work cycles.
Foldable side guards. Optional fixed driver protected platform.
|
|
| The Linde Electric Pallet Truck with Rider Plattform T20SP offers convenience and safety with its innovative driver’s platform, set at a 45° angle. The standard electric steering and powerful 3kW-AC-motor can make a great difference in any warehouse. Active side stabilisers ensure perfect stability and road traction. All components have a service-friendly CAN bus structure that allows you to set each parameter individually for maximum handling performance on the T20SP. Service calls are needed only every 1000 hours of use or once a year. |
|
MP20X, MP20XV
Capacity: 2000kg
- Electric pallet truck with folding operator platform
- Side or rear protection models with fixed operator platform (MP20X)
- Combi MOSFET electronic control technology
- Yale AC Technology
- Ride-on or pedestrian operation
- Brushless power steering motor (MP20X)
- Rear fixed protection with fixed platform (MP20XV) |
|
TRAY FOR SKIP WASHING PLATFORM
In order to respect the environment, SECATOL present a special tray for the skip washing platform to hold back the waste waters.
The tray is placed under the front part of the platform and when lifting this front part, the tray can be removed.
The tray has the following equipments:
- 4 lifting eyes to facilitate the prehension.
- An overflow outlet to evacuate the clear waters after the settling and decanting of the waste waters |
|
SKIP WASHING PLATFORM
PATENTED EQUIPMENT
To facilitate the cleaning and washing of the SECATOL skip range
The SECANET skip washing platform has been designed to improve the cleanliness on the building sites by facilitating the cleaning and maintenance of the SECATOL range of skips.
The two ladders, the platform, the guardrail and the security handrail on the washing area make the skip washing platform a secured element to use.
All types of SECATOL skips can be placed onto the platform by means of different abutments.
The platform can easily be placed with a forklift truck or with a crane and can be fitted on the floor with pins on the feet.
The platform is easily washable and the mesh metal on the platform does not held back the washing waters. .
If needed, the washing platform can be supplied with a special tray to hold back the waste waters.
The skip washing platform is available in painted or galvanized version. |
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT
Mod. ISR 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system |
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT WITH PLATFORM
Mod. ISRP 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Platform
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system |
|
Nova TSL/TSP
The pedestrian stacker is a truck controlled with a tiller arm. Intended for stacking up to 4.8 metres.
With the driving platform folded the minimum aisle width is 2.3 metres. A ride-on driver requires a minimum aisle width of 3 metres. Permitted travel speed is limited to 6 km/h.
NOVA TSP: With platform
NOVA TSL: Without platform
Handling "open" load carriers.
|
|
Used in applications such as train doors or funicular or cable railways, these automatic doors play an important role in public transportation. Safety, reliability and comfort are enhanced; a train service according to the schedule is ensured while the passengers are protected against potentially harmful incidents.
Modular product structures allow to achieve customized installation solutions for automatic doors in public transport systems. |
|
MicroTCA Integrated Platforms
Kontron offers comprehensive pre-integration and pre-validation services for its MicroTCA open modular platforms. Available in different form factors, the line of Kontron OM MicroTCA platforms are reliable, scaleable and always the best configuration from the very start. |
|
The high-speed SMT connector Microspeed with the pitch 1.0mm is especially designed for modern board-to-board applications in telecom and datacom equipments with data rates up to 10 GBit/s. MicroSpeed features differential signal transmission with a impedance of 100 Ohm or single ended signal transmission with a impedance of 50 Ohm. Two different signal contact arrangements are possible. For improved crosstalk parallel signal ports are recommended. A excellent signal integrity is achieved by a design with 2 signal and 2 shield contact rows. The termination area of the shield contacts is available in 2 options: SMT or THR (Thru Hole Reflow).
For fully automatic SMT assembly the connector features:
- Tape and reel packaging
- Black high-temperature insulator for fast and reliable visual recognition.
- Integral pick and place surface for easy grip with a vacuum pipette |
|
|
|
