|
|
Single-level FMS w/ RGV
One of the most popular arrangements with almost unlimited capacity. The in-line configuration allows any number of future machines, pallets and stations to be incorporated.
|
|
. FROM PROJECT PLANNING TO TROUBLE-FREE OPERATION
You can expect from ANGER a turn-key process solution. From pre-planning via optimization of tool- and spindle design, construction of chucking systems, cleaning and deburring up to integration of tool monitoring systems, measuring systems and automation on shop
floors.
Professional project management guarantees run-off in time and process capability as well as high availability of the installations.
. No Limits for AUTOMATion
The ANGER high performance machine permits flexible loading from three sides and offers to the planning engineers the flexible use of standard automation solutions: robots, gantry, portal, NC-axis and semi-automatic
feeding system Easy Handling™. Loading from the side, either from left or from right is commonly a big benefit in plant integration.
. AUTOMATIC REFERENCING
A new software for automatic referencing by touch of a button and additional features such as the teleservicing module and graphic visualisation modules incorporated in the control make ANGER machines intelligent systems facilitating the operator's work and saving operating costs.
. VIRTUAL PRODUCTION ENGINEERING (VPE)
Designed for volume manufacturing, ANGER technology offers a mechanic, modular and reconfigurable concept, using state-of-the-art software tools for process simulation in real time.
In this way, mechanical limits of processing can be studied during pre-planning (simulation of collision). Customers are enabled to modify their manufacturing processes in the course of operation and change programs on their CAM software.
|
|
Flexibility combined with productivity
Drawing on our experience as a manufacturer of special-purpose machinery, HORKOS helps to achieve greater efficiency by manufacturing and installing high-precision / high-efficiency special-purpose machines for use in time-consuming special machining processes. Advanced, highly flexible lines can be created by configuring machining cells at each major node.
Cell Standardization
Since cells are standardized, they can be combined to construct basic lines, reducing cost.
Meets Diverse Demands
Cells are available in a wide range of variations, and for machining work pieces of several different sizes, enabling the optimum lines to meet diverse demands.
|
|
- 1st and 2nd operations on same lathe W22-T4;
- complete drilling on vertical drilling center DWN-22V.
The cycle can be carried-out only when the lathe Is equipped with pallet loading system. Production capability is influenced by the lathe's ability to machine 1st and 2nd turning operations in sequence of one another on a continuous basis.
As indicated in the machining cycle below, the theoretical production capability for the machining of a 15"x7" wheel is about 33 pcs./hour.
|
|
- cutting force up to 310 kN
- opening of the blades up to 275 mm
|
|
| ... products without technical information |
| |
Retsch SM 2000 cutting mills are especially high performance and user-friendly machines for crushing tough, medium-hard, soft, elastic, brittle and fibrous materials. Running slowly or quickly with different rotors and hoppers, they crush a wide range of materials, eg:: waste samples, plastic parts, biological substances, food and animal feed and beverage cans. The SM 2000 mills are therefore ideal for research, testing and operational laboratories, for technical training facilities or for creating samples in production.
Further model: SM 100.
Product Advantages:
powerful size reduction, even of heterogeneous mixtures
defined final fineness
low heat build-up
wide range of accessories for universal use
central locking device
fold-back housing
easy cleaning
robust, safe design
2-year warranty, CE-conforming
|
|
Cutting mills are particularly well suited for comminution of soft to medium-hard, fibrous or tough materials (including plastics). They are frequently also used in the preparation of heterogeneous substance mixtures and for sample preparation for RoHS and WEEE analysis. In this type of mill, samples are comminuted through cutting and shearing. The fineness is determined by a sieve insert.
Various knife geometries and replaceable blades ensure maximum flexibility and durability. Grinding parts of various steel types as well as of hardmetal tungsten carbide can be used for controlling the abrasion problems.
All grinding parts can be removed for cleaning in just a few seconds without tools – unbeatable fast, simple and efficient!
YOUR ADVANTAGES WITH FRITSCH CUTTING MILLS
- Especially simple operation for fast work
- Unmatched ease of cleaning thanks to patented quick opening facility
- Optimum airflow for particularly fast grinding and secure protection against clogging
- More stable running and low wear due to the patented double cone bearing of the rotor
- Exceptionally long service life through use of replaceable and fixed knives
- Unique grinding chamber geometry: minimal dead space and progressive cutting geometry between the rotor and the fixed knives – for faster and simpler operation
- Grinding parts with different cutting geometries and materials - perfectly adjustable to your application
By the way:
FRITSCH Cutting Mills are available in different configurations – for each application the perfect Mill!
|
|
From lab/pilot to production requirements, Hosokawa Micron Powder Systems offers a complete line of scaleable size reduction technology for the chemical process industries.
Whether you call it size reduction, milling, pulverizing, jet milling, air milling, or simply grinding, we can help. Our broad application expertise allows us to help you select the technology that works best for your application. We are flexible enough to design and supply a complete system for the most unique applications yet our standard offerings are economical and acceptable for most chemical grinding applications.
|
|
Maximize your productivity and lower your cost per cut with OTM™ quality and variety.
END MILLS
Small Diameter End Mills
Small Diameter End Mills – Single Flute INCH
Small Diameter End Mills – Two Flute
Large Diameter End Mills – Single Flute
Large Diameter End Mills – Two Flute and Three Flute
Extended Length End Mills
Long Edge End Mills
|
|
... see all the products in the category
Grinders
|
System of Extraction and
decantation of Abrasive Muds
SEBA
Eductor continues abrasive deposit for
installations of cutting jet of water:
It is using a particular drain that the abrasive deposit is continuously aspired, in a simultaneous and reliable way, at various places of the basin of cutting and guided towards a container of decantation with one or two Big Bags. The water which runs out by Big Bags is filtered and repompée towards the places of aspiration of the basin of cutting by means of a system of washing to counter-current to guarantee a cycle of aspiration. The fine sands deposited in the tank Re-are also pumped in the basin of cutting. Doors simplify the withdrawal of Big Bags filled.
Advantages:
Better profitability thanks to a reliable process and with a reduction of the expenses of evacuation of the deposit.
Process of aspiration and washing with completely automatic counter-current.
High rate of decantation thanks to the use of second Big Bag.
Return of water filtered to the basin of cutting.
Possible process of decantation until a distance of 5 m of the basin of cutting.
Extension simplified for static basins of cutting until 2x3 m2
Volume of evacuation decreased thanks to the deposit drying oven.
Handling facilitated for an effective transport of Big-Bags
|
|
- Power: between 3 and 16.5 kW
- Air flow: 350 to 1890 m3/h
- Water flow: 280 to 720 L/mn
- Vacuum: 3400 to 9500 mm/CE
- Capacity: 60 to 5000 litres
|
|
Non-stop operation with MAHLE automatic filters
To remain competitive, companies must use every potential to raise their productivity. For this reason, production processes are being increasingly automated. The capacity of machine and plant should be utilized completely. They can run in 24-hour operation only if certain requirements are fulfilled. To be able to comply with the high quality requirements on the workpieces to be manufactured, working fluids must be treated and regenerated. Product media must satisfy the requirements exactly and high safety requirements on plants and processes must be maintained. Furthermore, maintenance and disposal activities must not interfere with plant operation or interrupt it. The filtering of liquids, pastes and similar materials with automatic filter systems is therefore becoming increasingly popular in industry because it enables economic operation without downtimes. MAHLE automatic filters have captured further areas of application through the advantage of rational non-stop operation with automatic cleaning processes which eliminate the need for further disposal activities.
MAHLE automatic filters are used with:
Cooling lubricants for metal cutting operations as well as sheet metal shaping,
Marine consumables such as engine oil and fuel,
Washing fluids for industrial parts and vehicles,
The manufacturing and processing of grease, oil, pastes or adhesives,
Other fluids or products such as miscella, water, chocolate, dough and fruit pulp.
|
|
|
ACT/CUBE : 3D nesting software aimed at professionals specialized in cutting materials such as foam, polystyrene, polyurethane, marble, wood or deep-frozen food. From a set of raw-material blocks and a set of outputs to be produced, ACT/CUBE automatically calculates the 3D layout, for significant savings in terms of time and material. Thanks to a powerful optimization algorithm, ACT/CUBE enables you to quickly execute very compact 3D assemblies. The software optimizes the use of material not only within a block but also by choosing the best blocks to be used. ACT/CUBE also enables you to reuse offcuts as a priority. ACT/CUBE produces edge to edge cutting plans adapted to the different cutting technologies (wire, blade, saw, etc.) and offers many specialized features. ACT/CUBE can be easily coupled with Production Management and ERP systems.
|
|
TOOL SIMUL is a calculation software of the optimum conditions for cut according to many parameters workshop (standard of cutting tools, property of material, power to the spindle machine, depth of cut, etc).
It also makes it possible to capitalize the know-how of the companies while making it possible to adapt the model of calculation according to the experience feedbacks of the operators.
TOOL SIMUL is a software of the continuation "Numerical Workshop" of SPRING TECHNOLOGIES.
|
|
APEX high-perfprmance water coolers are freestanding and compact. Thy are designed and installed to control specialist processes ( electro-spindles, linear motors, laser, electron guns, vacuum pumps, etc ).
Special coolers have been developed for coolant fluids (emulsion and cutting oil).
RLC and RLCE range : 3 - 60 KW cooling power.
|
|
We only work with constructors and distributors and not with end users
|
|
Standard Features:
- Digital Auto-Temperature Controller
- Compact, heavy duty construction
- Cleanable aluminum air filters
- High-capacity filter assembly
- Forklift Access
- For coolant or non-sulphur oil duty
Optional Features:
- Self-priming circulation pump
- Installation Kit
- 460 VAC
- Non-copper units for sulphurized oil
- Casters for mobility
|
|
CoroMill 490
Sandvik Coromant has launched the first of a new generation of shoulder mills, the CoroMill 490, which reduces machining costs by up to 25 per cent. CoroMill 490 is a high-precision tool for applications where reduced depths of cut and less final machining are required, as with the near net shape precision forgings and castings used by machine shops for higher productivity. Less, but more precise, work is needed on these castings and forgings. This is possible with the four edge insert design of CoroMill 490 and reduces substantially the cost per component for customers.
CoroMill 390
A new range of damped silent tools from Sandvik Coromant is bringing substantial performance benefits to complement the existing range of long and slender CoroMill® 390 milling cutters. Integrated dampening offers more efficient, vibration free machining to improve the performance of cutting tools working in deep cavities and pockets. The stabilization of the machining process in this way provides wider machine utilization for face and shoulder milling, especially in long overhangs and will boost the capabilities of long reaching tools.Reducing vibration in often tricky situations provides the confidence needed to increase the cutting parameters without compromising work piece quality. This enables the achievement of greater machining success with the CoroMill® 390 - including improved component surface finish and longer tool life.
|
|
CoroMill 390 is the most versatile facemill on the market for better accessibility. It offers an opportunity to reach the best productivity for each specific type of operation - just by combining the most suitable cutter pitch with the most relevant insert geometry and grade.
CoroMill 390 is the first choice cutter for versatile facemilling.
|
|
| ... products without technical information |
| |
|
