|
|
The L-700 Spindle Alignment System has been helping Detroit build quality automobiles for over 10 years. Prior to the L-700, transfer lines were aligned with indicators and alignment bars. This often resulted in frequent shutdowns due to poorly aligned spindles causing premature tool wear. Poor alignment also resulted in high reject rates, excessive downtime and poor productivity. On one line alone, the L-700 was able to save one GM plant $1.2 million in reduced tooling costs and downtime in the first year of operation after laser aligning the whole transfer line.
The L-700 can also be used for aligning the critical components of a lathe, aligning spindle boxes of large rotary dial machines, aligning the output shaft to the centerline of a twin-barrel extruder and many other applications. When combined with our P-405 Remote Optical Square, the L-700 can also easily measure cross-slide squareness on a lathe
|
|
Ever increasing demands on CNC lathes require these machines to perform secondary operations such as cross drilling, milling to avoid rechucking of the workpiece. Live tooling when fitted to an adequately designed turret can fulfil this requirement.
Alberti is once again a pioneer, offering a wide range of live tools that incorporate the same hallmarks of quality, performance and reliability as the world renowned angle heads , with after sales service.
Alberti works with some of the most important lathe manufacturers and distributors world wide and offers standard designs of live tools for many CNC lathes.
Shafts supported by double ball bearings at the front and one at the rear;
Spheroidal GS 600 cast-iron body;
Case hardened steel housing with ground bearing bores;
Compact overall dimensions and weight;
Higher performance than similar products on the market;
Heat treated, precision ground components to improve performance;
Ability to tap with the use of axially-compensating collets. |
|
In order to accomplish the complete processing of workpieces on a center lathe, there are machines, whose acquisition is extremely complex very expensively and programming.
Our proposal for solution aims there that with a relatively simple accessory equipment, which can be to a large extent completely finished worked on turned parts.
This accessory equipment, briefly "MILLINGFIXED" called, can both on conventional and cycle-steered center lathes, to be simply post and/or rigged.
To the temporary storage facilities of turned parts, renewed rigging to a second machine, double expenditure of time, as well as high acquisition value are allotted. Complex programming and an impaired work space are omitted likewise by the employment "MILLINGFIXED".
We are convinced of the fact that this innovative solution will be in particular for manufacturing and repair shops relating to crafts, as well as very useful for school and training. |
|
This equipment was conceived many years ago to make up for the lack of a universal grinder, but it is still widespread today because of its extremely simple use.
It is provided with standard accessories for internal-external grinding and with proper ratios to change the wheel speed and enable the same finishes to be obtained as on real grinders at decidedly low costs. |
|
A new way to conceive the power unit of the lathe for high production and precision applications. The new technologies of manufacture of the motors allow obtaining many copies in a view lot of volumes.
As an option may be requested parking brakes, which are used to block the chuck axis either during the working or for safety purposes, when the operator replaces the worked piece.
To guarantee the best results of cooling and homogeneity of the structures we use the technology of the cooling lead-in on the outside of the motor. |
|
| KAUP STATIONARY MATERIAL HANDLING EQUIPMENT ARE PROJECT RELATED SYSTEMS SOLUTIONS WHICH CAN BE INTEGRATED INTO ANY PRODUCTION LINE. THEIR VERSATILITY IS BASED ON THE MODULAR BUILT SYSTEM OF OUR RENOWNED FORKLIFT TRUCK ATTACHMENTS. THE CAPACITY SPECTRUM RANGES FROM 0,5 TO 18 TONS AND THE EQUIPMENT CAN BE USED TO CLAMP, LIFT, TURN, EMPTY AND PUSH A VARIETY OF GOODS. CONTAINERS WITH RAW MATERIALS CAN BE TURNED AND EMPTIED, BAGGED GOODS TURNED AND DE-PALLETIZED, SHEET OR PAPER SHEETS TURNED FOR PROCESSING ON BOTH SIDES, WOODEN AND STEEL CONTAINERS FILLED WITH BOTTLES OF CHAMPAGNE ARE TURNED AT A SET PATTERN AND SAVE MANUAL TURNING OF EACH INDIVIDUAL BOTTLE. GOODS TO BE TURNED BY KAUP STATIONARY INVERTERS ARE BROUGHT TO THE EQUIPMENT BY FORKLIFT TRUCK, CONVEYER OR HANDING FORKS. THE KAUP EMPTY PALLET INVERTER IS USED AS A PALLET DISPERNSER OR EMPTYS PALLET STACKER. AVAILABLE WITH DIFFERENT OPTIONS. |
|
| ... products without technical information |
| |
| The fully automated VFT-ultra generator offers outstanding performance based on Satisloh´s Fast Tool Technology. It offers full free-form capability and additional features as autocalibration and a second fast tool axis. |
|
Zeropoint Quickchanging cylinder for turning machine with passage for spindle nose ...
• Quick changing of chuck, tongs and special equipment
• High-precision of radial positioning or arresting
• Media ducts against chuck lubrication, hydraulic clamping and exact points for cooling and cleaning.
• Blowing off and sputter
• Great holding force and form fit
• Release control
• Safety system in case of interference, thus low risk of damage of the machine |
|
Sandvik Coromant Capto® is the first universal quick-change tooling system suitable for turning, milling, boring and drilling. Combining Coromant Capto® toolholders with CNC machines shortens set-up times and increases your productivity.
Coromant Capto® toolholders offer exceptional repeatability to +/- 2 microns, allowing tools to be pre-measured away from the machine. Their strong coupling means high metal removal rates and units are lightweight and easy to handle.
Craftsman Tools offer the full range of coupling sizes – C3, C4, C5, C6 & C8, and produce holders for the major machine tool suppliers along with special solutions to suit other machines. The main machines for which we produce Coromant Capto® toolholders are:
Doosan Daewoo
Yamazaki Mazak
Mori Seiki
Okuma
Haas
|
|
Choose from a variety of toolholders, boring bars, cartridges, or modular systems to maximize lathe productivity.
Cartridges
Available in large range of lead angle geometries and various insert styles. Completely interchangeable in any bar, head, or tooling block manufactured to ANSI or ISO standards
Interchangeable Head Boring System
Composite, De-Vibrator, and Tunable bars perfect for machining at extended lengths without chatter, increased metal removal rates, and high precision.
KM Micro
Versatile, economical, and quick, this system is Kennametal proprietary, and it can be used to hold the conventional turning, threading, and grooving inserts. Available in shank sizes 16mm and below.
Kendex (for ID and OD machining)
Top clamp and MTS: These two systems provide the optimum pressure and additional chip wear protection for Kendex inserts.
Kenloc Combination Toolholder (for ID and OD machining)
The widely used combination holder with top clamp and pin has the largest range of sizes for all your Kenloc insert applications.
Screw On (for ID and OD machining)
Ideal for profiling and small part applications, these holders are popular for their precision, wide range of lead angles, and performance
Top Notch Turning (for ID and OD machining)
Robustness is the key: This system has been specifically engineered for cast iron machining applications. |
|
Rated the best collet chuck on the market.
- Balanced to 18,000 RPM @ G2.5
- 0.0001" runout from shank to collet pocket.
- Inspection report included with each holder detailing accuracy and balance.
|
|
Toolholders
Improved Performance
. Greater Stability - allows higher feed rates without vibration
. Greater Accuracy - reliable clamping helps maintain close tolerances
. More Secure - new clamp feature grips the insert in two directions downward and back to pocket wall
. Easy Change Out - only one key required to change inserts
. Tolerances - less scrap with reduced measuring cuts required
. Flexibility - reduce inventory stock with total interchangeability of clamps and shims |
|
| ... products without technical information |
| |
The rotary linear BPTF indexing systems enable the user to make turning and milling operations:
Turning tables up to 4500mm diameter and 102 Kw power.
High rigidity and positioning accuracy rotary tables.
Hydrostatic rotation and linear displacement.
2 tandem drives configuration. |
|
Plate Ø 2500 - Ø 3000
Capacity load 20000 Kgs
Stroke 1500 - 2000 mm
Maximum speed 100 rpm
Spindle motor power 50 Kw
CN rotary and shifting table for turning and milling operations
- W axis configuration
- Cast iron and steel structure
- Table mechanical drive with gear
- Slide mechanical drive through recirculating-ball screw
- Hydraulic clamping of the axis
- Rotation with roller bearing
- Hydrostatic support system of the plate carriage
|
|
Plate Ø1500 - Ø1750 - Ø2000
Capacity load 10000 Kgs
Maximum speed 300 rpm
Power 30 Kw
CN Rotary table for turning and milling operations
- Use to vertical and horizontal axis
- Cast iron structure
- Mechanical drive with gears
- Hydraulic clamping
- Rotation with roller bearing
|
|
| ... products without technical information |
| |
Knobs and Knob Accessories
Features:
- modular collet knob system for various shaft diameters
- excellent surface finish (matt/glossy)
- special colors on request
New Soft touch and Classic Knobs
Features:
- Eye-catching design
- Great feel
- High durability
- Wide selection
- Multi-colored accessory program for the existing collet-knobs
- Available in soft-touch or traditional hard-touch |
|
Look at our comprehensive tuning knobs programme and choose a knob that will fully meet your specific requirements.
Your advantages:
- Aesthetically pleasing knob design for a modern, innovative image for your equipment.
- Quickly available - standard versions available from stock.
- Large choice of types and number of accessories for individual applications.
- Well-proven for electro-mechanical rotary potentiometer with shaft ends or flattened ends.
- Different fixings: lateral screw fixing, collet fixture system or pinned onto the axes. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
