|
|
Containers and mobile units
Technical containers in small and medium-sized production series for your fragile equipment.
Titan ® flat rack container
High-strength sealed container of aluminium/plywood construction, with chocks and shock absorbers as required.
|
|
mobile 19" Racks:
SPS-Racks (shock protection system): cases used for carriage of sensitive electronics, f.e. mobile server / digital video.
In a reinforced flightcase the 19" steelframe is with a special feather- absorbing-system swingingly supported.
We likely place our individual customer service about all ProCase products at your disposal.
|
|
|
|
|
|
Hardigg Rackmount Cases are world renowned as the toughest, smartest transport systems available for commercial, industrial and military shippers. Nothing protects better than Hardigg Cases when it comes to electronics. From the ultimate protection of a Classic Rack, to the removable rack option offered by SuperMAC, to the smaller footprint MAC Rack and ProRack – Hardigg has the solution to fit your exact shipping and protection requirements. All Hardigg Rackmount Cases boast rugged rotomoulded exterior shells that withstand all kinds of abuse, drops, in every environment.
"BlackBox™Rackmount Cases are lightweight, compact, offer light to medium duty protection and boast significantly better light duty shock performance than the competition. The use of recycled materials in the shell and a sturdy steel frame offer great value while upholding Hardigg’s industry-leading standards. When you need to be cost-conscious but can’t sacrifice performance, BlackBox is the answer.
* 24” (61 cm) Rugged steel rack frame with 10-32 threads designed to
meet ANSI/EIA 310-C
* Rack designed for applications up to 100 lbs (45 kg)
* Shock mounts provide 2” (5.1cm) of sway space to isolate equipment
* 2” (5.1cm) lid and 5” (12.7cm) lid with edge casters"
"FEATURES:
• Engineered racks provide a secure and mobile electronics enclosure
• 2 wheels
• Lightweight and compact
• Shock-mounts
• Shock mounts provide 2” (5.1cm) of sway space to isolate equipment
• Moulded-in rib design provides secure stacking and interlock
• Patented wide-design Comfort grip handles™ make lifting easy
• Black hardware is long-lasting and fastens securely
• Automatic pressure relief valve
• Airtight and watertight"
|
|
|
|
|
|
Racks with increase in value – one complete system
Integrated solutions, with which your complete equipment is always operational.
The concept: The case becomes the housing. In the 19"-Format and if desired
freight-suited or rollable. With EMV protection and IP degree of protection for safe mobile work also under most difficult conditions. Here quality and achievement are correct.
Technic on board - all in one.
When desired this manufacturer takes over manufacturing including procurement of all technical components: Professional installation and wiring. Starting from exhaust, sockets, cold device plugs and Connector plates up to TFT screens and front plates with resistant to friction imprints. Extendable work surfaces, opening by hinges and protective covers make the handling even more comfortable. Inclining/slanting feet and glare shield mechanisms provide for the correct point of view. Completely individually as required.
Plug & Play
Already prove your competence when simply opening the housing of the case. By inserted technology, which functions on simply pushing a button. These cases are individual, convincing complete solutions, which always offer you or your customer to you a clear increase in value at any time.
|
|
This versatile line of shock-mounted rugged aluminum cases has been thoughtfully engineered to satisfy the growing need for rack-mounted electronics in the field. They are ideal for the safe transportation and field operation of delicate electronic instruments, and offer a host of practical user benefits.
Installation of rack mounted equipment is quick and easy, with total accessibility from both the front and the rear.
|
|
The versatile family of 19” rack cases are modular in design, enabling the units to be assembled from standard piece parts to meet the specific requirements of the application. Available in heights of 1, 2 and 3U, the cases are available in three depths with a choice of ventilated or unventilated top and base panels and various front and rear panels. Ideal for housing audio and radio equipment in the broadcast industry, for use as fan trays in all applications, fire protection units and a host of other general purpose requirements, the trays are a very cost-effective way on housing equipment in 19” enclosures.
* Three heights and three depths
* Ventilated or unventilated versions
* Choice of front panel finishes
* Integral slide mounting points
* Customisation service to suit specific applications
|
|
|
The ZERO Warrior Rack mount case is a rotomolded, double-entry case designed and engineered to provide complete protection for the most sensitive E.I.A. 19" rack mount equipment and instrumentation. Your equipment is assured of security and protection - inside and out. Available in select U-sizes, colors and configurations.
|
|
Boxes for the integration of electronic equipment.
Cases or containers made with polyester or polypropylene.
|
|
|
The patent-officially protected aluminum luggage system S2000 offers 19 " installation types of HE 2 to HE 12 with all luggage types. Alternatively also circulating or 19 " edition angles can be inserted.
|
|
| ... products without technical information |
| |
Heaters
Compact heaters to keeping at a moderate temperature of cabinets and housings with electrical electronic installations.
In switchgear cabinets condensation with variations in temperature, which can lead to malfunctions or to losses of the components in the switchgear cabinet, forms. Heaters prevent subnormal temperatures and work against the emergence of condensation. Heater blowers provide additionally for the even distribution of warm interior air. The heaters are appropriate for continuous operation.
|
|
INTERTEC offers the widest selection of explosion-proof heaters worldwide.
- ATEX/CENELEC approvals for Europe
- CSA/NRTL approvals for America
- GOST approvals for the Russian Federation
Our EX-heaters in combination with EX-controllers satisfy all requirements from freeze protection as well as high demands in the analyse technic.
For further questions please contact: Tel.+49-9445/9532-0
|
|
THERM HI "smart heater" is a system consisting of
an explosion-proof electric heater and a
microprocessor, designed to control the air
temperature in instrument enclosures and protective
cabinets and to limit the surface temperature of the
heater.
The "option E" is equipped with an intrinsically safe
sensor, thus allowing measurement and accurate
regulation of the temperature of the instruments and
equipment (e.g. of manifolds).
... THERM HI heaters are designed to solve
sophisticated and complex heating problems in
hazardous areas, and in particular for high
temperature maintenance of analyzing equipment.
|
|
-Pressure clamp connectors
-Dynamic heating up
-Wide voltage range
-Temperature limiting
-Energy saving
-Clip fixing
-Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value.
The aluminium profile heater body design has a chimney effect and distributes the heat evenly.
The pressure clamp connectors save time and simplify installation.
|
|
Low surface temperature
Quick mounting due to clip fixing
Double insulated (plastic)
Wide voltage range
Small size
Compact heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060.
This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF 060).
Both versions are designed for permanent operation.
|
|
Technical details
• Protection class II (double insulated)
- protection type IP 54 (DK = IP 20)
• Temperature behavior:
· Self control, in variation of ambient temperature
· Dynamic heating-up
• Auxiliary fan attachable for improved air distribution
–> Auxiliary fan
• 2 Connecting alternatives (optional)
Connecting leads (AL) 0.5 m, 2 x 0.75 mm² Silikon
–> Other lengths upon request
Lead out terminal (DK) 0.08 - 2.5 mm²
• Mounting position: vertical
• 3 Fastening alternatives (optional)
|
|
Heaters for the thermo-regulation of enclosures, for application on DIN rail, and available in three version:
- with bipolar (15-30W) or three-pole (45-150W) power cable
- with three-pole terminal block (45-150W)
- ventilated (250-400W)
|
|
|
Condensation poses a particular risk for control electronics, especially with outdoor siting, but also indoors. Various different output categories ensure that the correct thermal output is always available. In this way, the total required thermal output can be distributed with complete accuracy within an enclosure.
|
|
Units for DIN or screw mounting.
TH heaters, installed separately from cooling unit, must be connected to a TMC thermostat. When used to prevent cabinet condensate they should be electrically connected also when cabinet is off.In this cabinet it’s better to install more heating elements with small heating power.In this way there is an optimal air temperature distribution.
|
|
Technical details
- Protection class I (ground wire) - protection type IP 54 (DK = IP 20)
- Temperature setting:
ON 25 °C - OFF 55 °C (operating temperature of heating
system itself)*
Tropical version possible: ON 35 °C - OFF 65 °C
-> Other settings upon request
- 2 Connecting alternatives (optional)
Connecting leads (AL) 0.5 m, 3 x 0.75 mm² PVC
- > Other lengths upon request
Lead out terminal (DK) 0.08 - 2.5 mm²
- Mounting position: vertical
- 2 fastening alternatives (optional)
Snap fitting for 35 mm DIN rail (figure 1)*
Screw fastening (figure 2)
|
|
PTC units for DIN bar application.
EH/FH heaters, installed separately from cooling unit, must be connected to TMC thermostat. When used to prevent cabinet condensate they should be eletrically connected also when cabinet is off.In this cabinet it’s better to install more heating elements with small heating power.In this way there is an optimal air temperature distribution.
|
|
Technical Details
• Protection class I (ground wire) - protection type IP 65
• Temperature setting:
ON 25 °C - OFF 55 °C (operating temperature of
heating system itself)
Tropical version possible: ON 35 °C - OFF 65 °C
–> Other settings upon request
• Connection
Connecting leads (AL) 0.5 m, 3 x 0.75 mm² PVC
–> Other lengths upon request
• Mounting position: vertical
• Fastening
|
|
Macron hosereel cabinets have a space saving design with hose reel and cabinet doors that open a full 180 degrees for ease of access and use. They can be surface mounted or recessed with architrave and are finished in red epoxy powder coat as standard. The cabinets are universal with left or right hand opening and four knock out water entry points per cabinet.
Macron hosereel cabinets are constructed from 16swg zinetec steel with a red recessed latch type handle for an attractive flush finish.
Features
- Door & hose reel swing out a full 180 degrees
- Red expoxy poswer coated standard finish, other colours available
- Solid or glass fronted door
- Stainless steel door option
- Surface or recessed mounting
- Top or bottom water entry
- Right or left hand swinging
- Supplied fully assembled and tested
|
|
| ... products without technical information |
| |
For high columns in kitchen pantries as well as residential furniture, Schock offers a solution for load ratings of up to 120 kg. It is based on a ball bearing slide system which is mounted at the bottom of the cabinet below the extensible module.
Lateral stabilization is achieved by another full extension slide which is horizontally mounted on top of the module. In face of its high load capacity, the system provides a smooth movement without swaying.
An automatic self-closing device with integrated damper enables soft closing, even when fully laden. The opening force as well as the closing and damping action will be adjusted individually on demand.
|
|
Electronic equipment and larger computer systems are often stored in 19" racks. In order to do maintenance or replace equipment easily, these 19" racks are often equipped with ball bearing slides. To mount the slides on the 19" rack, we have developed a revolutionary bracket system: the Unit Bracket system.
This system allows you to mount the slides onto the racks in a very easy and quick way. The same brackets can be used with slides of various lengths. The uni-brackets are adjustable in width and depth. The depth is adjustable without screws. Furthermore, we can also provide you with an ultra thin slide (8,5 mm).
|
|
|
|
see the results for the following category : 
