- Electricity - Electronics >
- Switch and Relay >
- Tripolar switch
Tripolar switches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Operating temperature: -30 °C - 75 °C
Safety Rope Pull Switch SRO When it comes to maximum safety on the assembly line, in the production line, or directly at the machine, the Safety Rope Pull Switches from BERNSTEIN AG are a reliable ...
Standard Rope Pull Switches Because of their specifications governed by corresponding standards, these cable pull switches are used exclusively as safety command devices. These switches ...
Primary current: 200 mA
Voltage: 42 V
Diameter / length: 6 mm
Very robust, multi wafer selector with up to 24 positions, switching torque up to 20 Ncm and a rotational life up to 25'000 cycles Product Features 15° or 30° indexing angle Various options and customizations available ...
Primary current: 0.3 A - 15 A
Voltage: 30 V - 250 V
FEATURES Depth of 18.6 mm saves space.This space-saving switch has bodydimensions of 25 (W) x 14.8 (D) x 18.6(H). (63% that of our previous T-15 seriesswitch. PRECAUTIONS WHENUSING CADMIUM-FREECONTACT TYPE Models ...
Primary current: 32 A
Voltage: 690 V
Operating temperature: -25 °C - 40 °C
Boxed isolator switch disconnector from our high-quality own brand RS PRO is designed for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. ...
Primary current: 0 mA - 25 mA
Voltage: 24 V
Height: 3.6 mm
... comes to devices with limited space and higher numbers of codes are needed, tri-state switches will offer 3n different codes in the same space where a standard DIP-Switch will only have 2n codes.
PTR HARTMANN GmbH
Primary current: 2 A
Voltage: 30 V
Operating temperature: -40 °C - 85 °C
MKF-TS05 Waterproof Three-way Rocker Switch MKF-TS05 is a Waterproof Rocker switch with 3 positions. 3 gears locking, return to center automatically. long life span. IP rate - IP67 Mechanical gear ...
Primary current: 380 mA
Voltage: 24 V
Operating temperature: -25 °C - 50 °C
LOCKGARD M2.SP is an RFID key-operated safety switch with a key blocking device that allows : - the protection of an operator in a hazardous area by lockout. - the authorization of the energization of a dangerous machine The ...
Primary current: 20 A
Voltage: 150 V
Les versions standard sont équipées : • d’un canon H=11mm • d’un levier Inox H=17mm • de cosses Faston 6,3mm D’autres options sont disponibles sur demande via notre lien RFQ • de 1 à 3 positions momentanées ou maintenues • cosses ...
Primary current: 16, 32 A
The SEL series switch is engineered with a melamine insulated body, and a trip system control assembly. It has a current of 10 A, and a terminal placed on a screw with a plate clamp that measures 1.5 mm² It uses light ...
Primary current: 25 A - 160 A
A manually operated main switch must be provided for each mains feed in order to disconnect the machine's electrical equipment from the mains (e.g. when work on the electrical equipment is to be done). Designed as ...
Primary current: 25 A - 150 A
Voltage: 400 V
Many of our switches are available in enclosed form and suited to direct switching of motors. They have AC-3 breaking capacities as per EN 60947-3. In addition to the standard units, there are special switches, versions ...
Safety limit switch with rope – Left horizontal orientation – Pull wire with manual reset for emergency stop – IP66 Non overlapping slow action contacts (1NO + 1NC) – Positive opening operation Simultaneous slow ...
Comepi srl
Primary current: 24, 15 A
Voltage: 125, 277 V
The ST3 series toggle switches offer a heavy duty rating with UL approvals. This toggle switch has a rubber boot for water and dust protection, and has either tab, screw and solder terminal options. It ...
Primary current: 0.5 A
Voltage: 125, 24 V
rating:step angle between 2 positions 30°: 125 V AC, 0.15 A 24 VDC, 0.15 A step angle between 2 positions 36°: 125 V AC, 0.5 A 24 VDC, 0.5 A Contact resistance:100 MQ at 500 VDC Dielectric strength:1000 V, 50 Hz for the duration of 1 ...
Primary current: 100 mA
Voltage: 50 V
Diameter / length: 3.5 mm - 31.4 mm
... V (AC) Mechanical Properties Operation Force (Value) - 600 g Electrical Life - 2000 Cycles Actuator Type - Raise Type Switch Position - Off General Information Washable - No
Würth Elektronik eiSos
Primary current: 10, 16 A
Voltage: 380 V
Connection thread - M 24 x 1,5 Variations - on request Material - Brass
Primary current: 10 A - 15 A
Voltage: 12 V - 250 V
Operating temperature: 0 °C - 85 °C
The LTIH-Series are triple pole illuminated rocker switches available with steel snap-in or screw type mounting brackets. These switches are offered in a wide range of single or double throw momentary ...
Carling Technologies
Primary current: 16 A
Voltage: 400, 415 V
... ,8 Nm • SK= reverse switch • Tested according to IEC 60947-3 Cable Area to Switch Terminal (only Cu) (mm2) / Bolt size - 1.5-16 Color - Yellow / Red Enclosure - M2 Operation - Front-operated Switch ...
KATKO
Primary current: 32, 63, 80, 125 A
Voltage: 400, 415, 690 V
• Switch technology by means of silver contacts ensures safe and durable operation • Available with adapter to connect the switch to a three-phase section rail. Three different connection heights • ...
KATKO
Primary current: 250, 200 A
Voltage: 400, 415 V
... Available with red toggle (R) • Tested according to IEC 60947-3 Cable Area to Switch Terminal (only Cu) (mm2) / Bolt size - M8 E-Number - 3600809 Switch type - Load Break Switch Weight ...
KATKO
Voltage: 2.7 V - 24 V
Melexis’ Latch & Switch sensors use an innovative magnetic technology that allows the measurement of the lateral magnetic flux component. Top features Flexibility in the magnetic design PCB-less version with integrated ...
Voltage: 2.7 V - 24 V
... features Wide magnetic latch range: ±0.4mT to ±80mT Wide magnetic switch range: ±1.5mT to ±66mT Programmable hysteresis: 1mT to 36mT Product description Melexis’ Latch & Switch sensor ICs ...
Primary current: 6,300 A
Voltage: 690 V
Primary current: 10, 0.01 mA
Voltage: 5, 50 V
CECC approved toggle switch is chiefly designed keeping in view defense, telecommunications and other professional applications and listed in MUAHAG and QPL(Europe). Rivet contacts may be made up of silver, gold plated ...
Primary current: 15, 10 A
Voltage: 250, 400 V
The toggle switch with 600NH series consist of a black polyamide lever. Its configurations, solder lug and screw terminals consist of 3 poles. It is suited for motor loads and power applications with ranges of 15A 250VAC ...
Primary current: 0 A - 16 A
Voltage: 250 V
Product number 1352.0101 Weight 58,500 g Product family Rocker switches Switching function ON / OFF switch (TPST) Number of poles 3-pole Mechanical life endurance 1E5 Rating IEC 8 (6) A 400 V AC 5E4 Connections Socket ...
Primary current: 40 A - 250 A
... double or triple pole lines by using a single actuator. They are also able to fulfil circuit safe isolation when operating as a switch disconnector.
Primary current: 10 A
PSA010AK331S - 10 A 3 POL. ON-OFFCAM SWT (0-1) 60 ° SWITCHIN ANG
EMAS
Primary current: 16 A
Voltage: 400 V
The 0344 series, manufactured by Marquardt, is a rocker switch that is equipped with three poles. It has a sturdy and powerful structure that has been dust protected. It is approved to be used for 400 V.
Primary current: 25 A - 450 A
Voltage: 690 V
... Product Features Feature [VMC 9~85] 1) World-class level switch operational cycle, its performance was recognized. - It is a product applied with the accumulated switch design and the electrical ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining