|
|
Bending machine 3D (3 axes) functioning according to the principle of rolling up for round, square tubes, rectangular and profiled out of carbon steel or stainless, copper, alloy of aluminum, etc...
Capacity of standard bending on round tube steel: from 2 to 76.1 mm (76.1 X 6.3 mm)
Angle of bending: of 0° with 180°
Standard length of the arm carry-chuck 3 Mr. Any higher length on request, according to length of the tube to be curved.
Motorization: electrohydraulic group of 7.5 kw
In the initial version, the chucking devices are actuated manually. In option, a hydraulic control is proposed.
Numerical visualization of the angle of bending, the angle of orientation of the plan of bending and the longitudinal position of the tube on the bench.
|
|
For tubes:
Steel
Stainless
Aluminum
Copper
Maximum capacities: (in mm)
Standard ray: from 25 to 190 mm
Motorization (electric versions):
Asynchronous motor 750W - 50Hz, 400V
Three-phase current (to specify the voltage with the order).
Classify insulation IP44.
Speed of bending: 6 tr/min.
Time of bending: 2,5 seconds (1 clotheshanger with 90°)
|
|
Semi-automatic model:
On this machine, the tightening of against form of blocking and bending as well as the extraction of the chuck are carried out manually using lever.
For tubes:
Steel
Stainless
Aluminum
Copper
Capacities:
Ray of maximum bending: 300 Misters.
Angle of maximum bending: 190°
I/V tubes E24 reheated: 12 cm ³.
Bending (mm):
Type 60
Tubes Rectangular Square Round
Steel 60x5,5 50 60x34
Stainless 60x4 45 60x34
Aluminum 60x8 60 60x34
Copper 60x8 60 60x34
Features:
Asynchronous motor 5500W - 50Hz, 230/400V
Three-phase current (to specify the voltage with the order).
Speed of bending: 5 seconds (1 clotheshanger with 90°).
Speed of return: 10 tr/min.
Mass: 980 kg.
Obstruction: 4,035 X 0,948 X 1,020 m
|
|
New REINFORCED version for tubes up to dia. 76 x 2mm stainless steel
Electronically programmable machines for bending tube and profiles with very tight radii: from 1.5 to 2.5 times the tube outside diameter [the bend radius depends on tube outside diameter, wall thickness, and material]. Designed to meet the needs of users who require the maximum possible bend quality combined with very tight bend radii, ideal for medium-lowproduction volumes. Ease of use, flexibility, and rapid tooling change mean that the initial investment can be quickly recouped.
Typical applications: construction of stainless steel handrails for stairs, bullbars, roll-bars, special exhaust pipes, lamps, pipes for the air conditioning sector.
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ø 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ø 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
| ... products without technical information |
| |
|
|
see the results for the following category :