|
|
The DRILLMASTER 150 series was designed and manufactured to meet the
toughest mining environments. Featuring a Clark power shift transmission with 3 forward and 3 reverse gears allowing the drill rig to travel the mine with ease.
It is a completely equipped, high capacity drill rig for small sized tunnels and
mine production.
For ease of maintenance and repair the DRILLMASTER 150 series was
designed with the mechanic in mind. The design provides for easy access and removal of all components and hydraulic pumps.
The unit is fitted with RDH'S own unique Drill Control Manifold which features some of the newest hydraulic technology available.
The DRILLMASTER 150 series is a self contained drilling rig with an onboard
compressor and air mist drilling system.
Featuring a solid frame, unlike other single boom jumbos that lack in stability and are unable to operate on uneven surfaces or conditions.
|
|
The DRILLMASTER 100 Series was designed and manufactured to meet the toughest mining environments. Featuring a Clark Power Shift transmission with 3 forward and 3 reverse gears this jumbo travels the mine with ease. Boasting an overall width of only 1321 mm it is capable of drilling in narrow vein headings as well as large headings due to its boom coverage.
For ease of maintenance and repair the DRILLMASTER 100 Series was designed with the mechanic in mind, providing easy access and removal of all components.
|
|
Self-propelled Drilling Truck is a one working station, one extension arm, for drilling shot holes at underground headings of methane-free mines that mine non-ferrous metals ores and/or mineral raw materials.
The working system of the drilling rig is equipped with telescope extension arm of RWP type and telescope drilling frame with a hammer hydraulic drill.
Drilling rig is equipped with a cabin that ensures protection for the operator seating there; the protection against collapse during vertical stroke with the energy of 60 kJ.
Good stability and relevant power transmission system enables the use of the said machine to exploit deposits at headings with the longitudinal grade of (in the traffic direction) to 15° and at headings with across grades to 5°.
|
|
Track-mounted DH-DC1 (BTRK) 1 drill jumbo
The track-mounted DH-DC1 (BTRK 1) drill jumbo with telescopic drill boom is intended as a universal machine for high-performance drivages in medium section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
Drift Runner MTI - 1SB
The MTI SB Series single-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Drift Runner MTI - 2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner MTI - 1XSB
The MTI XSB Series single-boom hydraulic rig is designed for drilling vertical, horizontal, and angled holes in underground production headings.
Vein Runner LONGHOLE
Hydraulic center articulated four-wheel drive unit for long-hole drilling in underground mines. It is designed for vertical plane rings, fans and rings.
Montabert HC
1964/1991 : more than 25 years of creativity and innovation. An unequalled experience in hydraulic drilling technique is now applied to the hydraulic drifters.
|
|
Robofore, fully computerized drilling jumbos
Robodrill manufactures on request new multiple boom Robofore Jumbos.Our Robofore integrates following :
- CAT 980F Carrier (Alt. : Carrier - Heavy Construction Type Wheel Loader)
- BUPEC robotic drilling booms
- HC107 MONTABERT drills
- MONTABERT feed and drilling regulation system
- MONTABERT computerized drilling system.
|
|
Pantofore, manually operated drilling jumbos
Robodrill manufactures on request new Pantofore Jumbos.These Jumbos integrate following :
- Standard available carriers or special design
- BUC universal drilling booms
- MONTABERT drills, feeds and regulation system
- Manual or Semi Automatic drilling controls.
|
|
|
|
|
|
Rock Drilling Jumbo Introduction
Among the development and research of the products, Sunward Intelligent independently researches and develops the key technologies of the control system, hydraulic control system and special mechanism of hydraulic rock drilling jumbo, which reaches the advanced level in the world. As the latest product in China, it has been included in the National Construction Machinery “15” Development Direction List. In the past, China relied on imports totally for this product, and this project effectively breaks the situation that the imported products dominate the market in the field, meanwhile it is of great significance to promote national development of large-scale construction machinery and improve technical tunnel excavation of China.
Rock Drilling JumboFeatures
·Telescopiform structure and lifting operator's cab. Ample space for loader to pass for discharging that minimize additional workload.
·High positioning accuracy, high drilling speed(up to 1.5-1.8m/min). less drilling bit wear.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
All-new hydraulic wheel jumbo features high capacity HD210 drifter with a new dual damper mechanism attains the extremely highly drilling performance and prolongs the service life of drilling tools.
Experience how smooth and speedy drilling can be.
|
|
All-new hydraulic wheel jumbo features high capacity HD210 drifter with a new dual damper mechanism attains the extremely highly drilling performance and prolongs the service life of drilling tools.
Experience how smooth and speedy drilling can be
|
|
An Auger Boring Machine (ABM) is used to bore horizontally through soil or rock with a cutting head and auger. The majority of ABMs are used to install pipe casing under railroads, highways, airport runways, creeks or any area of ground that cannot be open cut or disturbed in any way.
There are many types of cutting attachments for this machine. They range from Backhoe Teeth cutters for cutting through soil to the Robbins Small Boring Unit for boring hard rock.
Initially the ABM is set up in the starting pit on a predetermined length of track. A backing plate, usually steel or reinforced concrete block, is installed in the wall opposite of the boring to withstand the thrust exerted by the boring machine. The machine bores through the earth with a cutting head and the jacking force is provided by the hydraulic thrust. The pipe casing and auger sections are added as the machine advances. Spoil is removed from the auger through the casing to a door located on the side of the machine.
|
|
|
Our Long Tom rigs have been around for over twenty years, and are still in demand due to their simplicity and cost effectiveness. Designed to alleviate the negative aspects of hand held drilling and to improve drilling productivity.
|
|
Terex® MK65 Jumbo Drills
The MK65HE is an electric drill, diesel tram, rubber tired, two boom Jumbo designed to drill drifting holes, crosscut holes, bench holes and rockbolt holes.
SPECIFICATIONS MK65 JUMBO DRILL
Maximum hole depth: 12' 5" (3.81m)
Boom face coverage height: 21.25' (6.48 m)
Boom face coverage width: 35' (10.67 m)
Maximum tram speed: 6 mph (9.60 kph)
Length (depending on feed): 43' (13.15 m)
Width: 7' (2.13 m)
Overall height - Tramming: 8' (2.44 m) w/canopy
Overall height - Drilling: 11' (3.35 m) w/canopy
Maximum gradeability: 35%
Ground clearance: 1.25' (.38 m)
|
|
Track-mounted DH-DC2 (BTRK 2) drill jumbo
The track-mounted DH-DC2 (BTRK 2) drill jumbo with two telescopic drill booms is intended as a universal machine for high-performance drivages in medium to large-section roadways. The crawler base also allows the machine to operate on steep gradients.
|
|
21 SGBC-CC
Three boom jumbos can be supplied with three different boom sizes. The light alloy feeders can be supplied in lengths from 14’ to 22’, to suit the customer’s requirements. The largest boom gives a maximum drilling height of 11,5 meters and a maximum face width of 16 meters.
Motabert HC 109 drifters are standard.
The jumbo can be supplied with or without a service basket. Rod handling equipment for longhole drilling is available. The jumbos are supplied with Bever Control computer systems. The systems can be adapted to level of automation required by the customer. Full logging facilities and m.w.d. are available.
|
|
Fleet of Robofore and Pantofore
Robodrill has at it's disposal a fleet of :
- 10 Robofores (3 booms)
- 20 Pantofores ( 1 boom, 1 boom + loading basket, 2 booms, 2 booms + loading basket)
These units are available for rent with mechanical supervision and operators training programs.
Mechanical supervisors and operators are available and can be provided if required.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
2 ABC-CC
This is a smaller jumbo with articulated steering and booms that give a maximum drilling height of 8 m. and a maximum face width of 13 meters. Light alloy feeders in lengths from 14’ to 22’, to suit the customer’s requirements are standard.
Montabert drifters are standard.
The jumbo can be supplied with or without a charging basket. Rodhandling equipment for longhole drilling is available. The jumbo is supplied with Bever Control computer system with a level of automation, logging facilities and m.w.d. to suit the customer’s requirements.
|
|
Two-Boom Hydraulic Jumbo MTI-2SB:
DRIFT RUNNER - MTI-2SB
The MTI SB series two-boom Hydraulic rig is designed for drilling vertical, horizontal, and angled holes in under ground production headings. It features two hydraulic percussion drifters, and can drive headings 24'-6" by 18' - 0" (7.5 m by 5.5 m).
|
|
Oldenburg Cannon's line of rock drills, drill jumbos, and roof bolters have earned a reputation for simplicity of use, rugged reliability, and lowest cost per meter drilled.
Jumbos are configured in double and single boom set-ups, with enclosed or open cabs. Each customer order is engineered to meet the needs of the mine plan.
|
|
|
Atlas Copco Boomer is a range of high-capacity drill rigs providing the best overall economy, production capacity and well-proven reliability. The Boomer range can meet all your demands from 6 to 206 m2 coverage area. The unique Atlas Copco boom system offers outstanding flexibility and precision to ensure straight-hole drilling performance in high-quality tunnelling and drifting for mine development and production. An extensive range of rock drills is available from 16 kW up to 30 kW impact power.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
