|
|
Important Features of the Portable Model 966 and
Bench-top Model 965-10A Turbidimeters:
-Meet official specifications of USEPA, APHA, AWWA, WEF & ASTM. Accepted for NPDES and NPDWR compliance reporting.
-Factory standardized. Calibration of all 3 ranges are easily confirmed as per USEPA requirements.
-Supplied standard USEPA approved. Safe, non-carcinogenic and non-toxic. Stable, stays in suspension. No mixing or diluting.
-Measures turbidity in 3 ranges: 0-20, 0-200, and 0-1000 NTU. Resolution is 0.01 NTU in the 0-20 range.
-Direct-reading digital display. Eliminates incorrectly interpreting analog meter scale divisions.
-Simple 2-step operation without the need for standardizing. No prior training is required.
-Automatic decimal point shift and over-range indication.
-Optional flow-through cell for pumped or flowing samples.
-2-year instrument warranty with toll-free technical backup.
-Precision made in U.S.A.
|
|
Orbeco-Hellige Model 966 Portable and Model 965-10A Bench-top Turbidimeters quickly and precisely measure the clarity or cloudiness of any type of fluid. Both meet the official specifications of USEPA, ASTM, Standard Methods of APHA, AWWA, WEF and other world-recognized authorities. True nephelometers, both test at the officially mandated 90 degree angle between photo-detector and incident light beam. Direct-reading displays give results in NTU's (Nephelometric Turbidity Units) over the full span of turbidity in 3 ranges. Both meet design requirements of USEPA Method 180.1 and are ideal for NPDES and NPDWR compliance reporting. Also can be used to test water for Barium, Sulfate, Nitrate, Silver and Chloride using turbidimetric chemical analysis.
Price starts at $925.00
|
|
The PONSEL turbidimeter allow you the possibility to measure the turbidity without water sampler.
You just have to put the sensor into the water to measure turbidity
Range : 0 - 4 000 NTU in 4 ranges
Meter/Datalogger : Field and lobaoraty instrument
-IP67 watertight
-100 000 data memory
Sensor :
-Infra Red nephelometric technology (ISO 7027 compliance)
|
|
Turbidity Meter LAT-N1
Turbidity Meter LAT-N2
Turbidity Meter LAT-N3
Turbidity Meter ATA-K
Turbidity Meter ATS-K
|
|
The most important parameters needed for water analysis, especially in drinking water are now available in a portable meter.
You can obtain lab performance in the field by using the HI 93102.
It not only measures turbidity, but also pH, total and free chlorine, bromine, iodine, iron and cyanuric acid (CYS).
All this in the palm of your hand and in seconds!
Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor.
In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample.
Up to 25 measured samples can be stored in memory together with time and date.
|
|
Easy to measure turbidity.
You can easily measure the water turbidity anywhere with this portable sensor because it cannot be affected by external disturbance light.
Unnecessary to draw the water.
You just put the probe into the water to measure turbidity. You can avoid the hassle of drawing the water.
High durability
Controller Unit:
Waterproof IP67. Anti-bacterial metrical is used.
Sensor Unit:
Durable SUS316L is used. Optical window is made of sapphire glass.
It is equipped with a rubber to absorb the impact from wear and shock.
|
|
TURBIDITY MONITOR MODEL TM2200
Chemtrac's new TruTrac turbidimeter continuously monitors, records, and reports (integrated with SCADA) turbidity compliance data for municipal water filtration processes
FEATURES
- USEPA Method 180.1
- Simplified Calibration utilizes Removable Flow Cell.
- Data Storage and Retrieval as a backup to SCADA
- New all in one Design that Incorporates Debubbling and Display
- Multiple Communication Protocols including Modbus RTU & Modbus TCP (Ethernet)
- Quick Inexpensive Calibration using Same Cells that are used in Laboratory Instruments
- Communicates on same Network as Particle Counters
|
|
CL 52D
Nephelometer / Turbidity Meter
Salient Features & Benefits
- For measurement of Turbidity levels of dispersant in Liquids, by scattering of Light.
- Useful for determination of Sulphate, Phosphate, Chloride, Zn, Ag, Etc., By ASTM Procedure.
- Extendable for measurement of Inhibition growth of some anti-microbial agents.
- Compact, rugged & easy to operate, Moderately priced, Laboratory instruments.
|
|
The microprocessor-based waterproof TN100 meter is an easy-to-use turbidimeter that meets the rigor of rugged field applications. It is a "must -have" for anyone monitoring turbidity on the go. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).
Product Features :
- IP67 Waterproof and Dustproof - Cleaning and maintenance is simple. It floats!
- Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
- Sturdy Carrying Kit complete with 4 calibration standards, 3 empty cuvettes, batteries and comprehensive instruction manual
- Power-saving feature allows over 1200 measurements to be taken with a single set of AAA alkaline batteries
- Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
- Meets Performance Criteria as specified by ISO 1727 (DIN EN 27027) method.
|
|
4-beam pulsed light method
Measuring range 0,01...1000 TE/F
0,01 ... 500 EBC
Connections DN 40, 50, 65, 80, 100
Material st. st., PEEK
Max. pressure 6 bar
Max. temperature 0 ... 80°C (short-time 120°C)
Accuracy +/- 1% FS
Output 4...20 mA
|
|
Orion AQ4500 Turbidimeter
The Orion AQ4500 Turbidimeter offers advanced features not available on any other benchtop or portable turbidimeter. The dual source turbidimeter allows the user to quickly and efficiently measure turbidity in the units of their choice.
Product Detail
Data log capacity of up to 100 data points
Dual source to comply with EPA 180.1 and ISO 7027
Nephelometric and Ratiometric measurements with autoranging
IP67 waterproof portable turbidity meter
Readings in the range of 0 - 1000 NTU with a choice of units: NT, FTU, FNU, ASBC or EBC
Includes turbidity standards kit, rugged carrying case and replacement cuvettes
|
|
The turbidity meter, model 7048-Y, is used for online measurement of turbidity of the condensate, feed water, etc., of power plants.
* Calculates turbidity using transmitted light and scattered light
* The measurement result is directly read on the digital meter. Also, the meter is provided with DC 4 to 20 mA analog signal output.
* Cleans stains from the meter as necessary using a washing brush. (A cleaning interval from 1 to 999 hours may be selected.)
|
|
|
|
|
|
WTW has developed a new line of field instruments based on optical measurement offering the following capabilities:
• pHotoFlex: photometry, pH
• pHotoFlex Turb: photometry, pH, turbidity
• Turb 430 IR and Turb 430 T: turbidity
The instruments have been designed to extract the optimum performance from the latest generation optics optics with state-of-the-art LED technology.
Remarkable features include:
• Low power consumption
• Robust
• Display-driven user interface
• Waterproof
• Integrated smart cuvette adapter for 16 and 28 mm cuvettes
• Hand held
The exceptional versatility of the pHotoFlex, pHotoFlex Turb and Turb 430 makes them ideal for use in process control, water analysis, and the beverage industry.
Both pHotoFlex and pHotoFlex Turb are equipped with a pH function, measuring the full pH range from –2.00 to 16.00. The pH measurement is simplicity itself, offering automatic temperature compensation and auto buffer recognition.
For turbidity measurement the Turb 430 IR offers a large range from 0-1100 NT/FNU. Outstanding features include: Automatic 3-point calibration, GLP compliant data export via RS 232, calibration record and the setting of a calibration interval.
|
|
|
The user can designate up to 4 choices of wavelength at 350nm-1100nm of visible rays, thus it is being used in various fields such as chemistry, environment(water quality, air, soil), food, bioassay for residual pesticides, etc. In case of bioassay for residual pesticides to measure the inhibition level of residual pesticides or water analysis to measure the COO, TN, and TP levels of water, faster and more convenient measurement is possible with commercial test reagent
|
|
POCKET Colorimeter II
More than 30 flexible, single parameter instruments
- Easy operation
- Small enough for almost any pocket
- Reliable results without a mains connection
- Rugged construction yet lightweight
DR 800 series—compact colorimeters
The DR 800 models are preprogrammed for different numbersof tests:
– DR 820: 20 tests
– DR 850: 50 tests
– DR 890: 90 tests
All three DR 800s work best in combination with the practical HACH tests for reliable, fast results in wastewater, drinking water and process water analysis.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
