|
|
Posimatic™ - Swiss Automatic
Stellram has a range of tools for use on Swiss Auto type lathes with small cross section shanks from 0.375” (10mm) square to 0.750” (20mm) square. Grades and geometries are available to handle the specific feeds and speeds associated with these machines.
Some other features of this program are:
- Nose radii starting at 0 for excellent surface finishes and sharp internal corners
- New –62 geometry and new PVD technology
- Equal shank and tool tip dimensions on all toolholders for programming ease
- Boring bars with standard coolant holes to aid in chip evacuation
- Part-off inserts from 1.6mm/0.063” to 3.0mm/.118” widths
- Integral shank cutoff and grooving holders for maximum rigidity
- Back turning holders and inserts for turning behind a shoulder eliminates additional operations
- Tungsten Carbide reinforced boring bars to eliminate chattering
|
|
The surface plate centers are very portable and can be used
With less strain and effort the the heavy cast iron base centers
, without sacrificing accurancy .they also minimize space requirements on your surface plate .
All components are replaceable including the hardened tool stell centers
|
|
Solid Carbide tools for working in small bores (from diameter 2.1 mm).
These tools are made for the high tech, medical & small components industry.
They are used in machining centers or conventional machines.
The Tiny Tools are available in the excellent BXC TiN coated grade, for machining a wide range of stainless steels in low cutting speed.
These tools can perform the following applications -
Boring
Back Turning
Profiling and Boring
Threading
Chamfering and Boring
Grooving
Face Grooving
All tools include cooling channel on the shank, enable the cooling fluid to reach efficiently the cutting edge, for easy chip removal and smooth cutting operation.
|
|
|
|
|
|
A new concept from Sandvik Coromant is set to provide significant performance benefits in profile machining; the CoroTurn TR® offers a more stable clamping and improved security via a robust T-rail interface between insert and holder.
Profiling operations place extreme pressures on the tool, and conventional clamping designs often leave the insert open movement during machining which reduces component tolerance and quality.
To combat this, the T-rail design uses horizontal and vertical rails to provide a stronger support for the insert in the tool holder to reduce insert movement, leading to the production of higher quality, closer tolerance components. Further stability can also be achieved via a long insert screw which reaches deep into the holder to clamp the insert firmly in place.
The two cutting edge design utilises optimized geometries and facilitates the requirements of good chip evacuation, needed to offer more continuous, uninterrupted machining.
The CoroTurn TR® is designed for turning operations using -V (35۫) and -D (55۫) style inserts and is well suited to medium to finishing applications and the operational demands of modern multi-task machining.
|
|
Partial Profile
Partial profile threading inserts are available in two types with thread angles of 60° and 55°.
- 60° TYPE (ISO and Unified)
- 55° TYPE (British Standard Whitworth)
The partial profile inserts cut without machining the crest of the thread. The same insert can be used for a range of different thread pitches.
|
|
Threading Systems
Kennametal offers two standard tooling systems to meet your threading application needs:
LT - Laydown Triangle Threading for fine-pitch threads
Top Notch Threading for superior performance in heavy-duty machining applications
LT - Laydown Triangle Threading
The solution of choice for general use and adjustable shim applications.
Top Notch Threading
The ideal solution for for heavy-duty applications.
|
|
|
This toolholder, for use with Seco Tools' range of Snap-Tap® thread turning inserts, features the Anti-Twist™ insert locking system to provide incredibly secure insert holding. The Anti-Twist system has two significant design features.
|
|
7745 VOD Series
Stellram's most versatile cutter. A strong multi-purpose cutter excellent in high temperature alloys and stainless steels using 4mm or 6mm octagonal inserts for up to a 0.445" depth-of-cut.
7745 VS Series
Excellent in tool steels and cast irons. Exceptionally thick square inserts handle tough conditions. Design allows for recessing operations.
|
|
Cutting Tools
Application of cutting tools is varies and generally categorized into turning, milling to drilling. Tungaloy has extensive lineup of TAC inserts with combination of various grades, dimensions and chipbreakers. These inserts respond to “high-speed and precision cutting” needed with time.
|
|
PCD:
For working with aluminium with a high silicon content, non-ferrous metals, CFK and GFK materials as well as compound materials like glare.
CBN:
For working with carbon rich and hardened steels.
We produce optimal milling tools, complete and according to your requirements. Together we determine your tool requirements and produce them exactly according to specifiations. The milling, production and material is determined by your working requirements. We balance and shrink fit your milling tools on request.
|
|
| ... products without technical information |
| |
Mandrels and tooling from Bates Technologies are designed and engineered on state-of-the-art CAD and CAE systems for a variety of applications for all honing machines. Our repair and reconditioning services ensure optimum performance and precision.
Our insert-type Microsize® tools permit infinite diamond grade selection, allowing you to match the abrasive precisely to your application requirements. The result is the consistent size, geometry and finish that makes Microsize® the process of choice for many production applications.
Bates Technologies creates mandrels and tooling for the honing of:
* Engine blocks
* Pinion gears
* Portable tubes
* Cam and crank bores
* Gage plugs
* Small bores, diesel injector & ab sensors
|
|
The hole is drilled using a commercially available standard drill bit.
Then, insatallation is made with a manual or an automatic special tap for fitting wire thread insert.
|
|
Insert bearings are very popular with Go Kart applications.
Inserts with Steel Balls
Metric 30 mm
Inch 0.75 to 1
Inserts with Ceramic Balls
Metric 35 mm to 50 mm
Some of the Ceramic Inserts Inch sizes include UC202C 5/8", UC204C 3/4", UC205C 1", UC 206C 1-3/16"/ UC 206C 1-1/4", UC 207C 1-3/8"
Some of the Ceramic Inserts Metric sizes include UC204C 20mm, UC205C 25mm, UC206C 30mm, UC207C 35mm, UC208C 40mm, UC209C 45mm, UC210C 50mm
Most of these insert sizes are also avail in the standard steel insert version.
Avail in 4 Bolt or 2 Bolt version.
E-Mail sunil@bocabearings.com
|
|
TYROLIT has developed grinding wheels for the economic production of high-quality cutting edges. These provide the required cutting edge quality with high stock removal rates, wheel life and are easy to dress.
Not only the choice of the specification also the trueing and dressing are important influential factors which are sometimes underrated.
Trueing, which is usually done with vitrified SiC wheels, produces the geometry and flatness of the grinding wheel faces.
Afterwards, dressing with a vitrified aluminium oxide dressing stick is necessary to expose the diamond grit.
|
|
|
The Recoil range of power tooling ensures consistent high volume thread insert installation for a variety of applications. Recoil powered installation tools may be supplied for use with either a compressed air supply or via a stabilised low voltage power supply to suit your particular requirements
|
|
REF 23286 00
Very light (270 g for a pair size 10) and comfortable, this flexible glove is also machine washable. A GORE-TEX® membrane brings an ultimate barrier protection.
The ease of hand movement combined with a perfect fit ensures a high level of dexterity. As a result, time spent in hazardous area is reduced as the level of productivity and quality is increased.
|
|
MTC™ Toolholder System
Double V design:
- offers maximum insert stability
- optimizes insert positioning
- provides "operator friendly" insert indexing
- Integral shank toolholders are available in stub or extended DOC, right or left hand.
- Integral shank toolholders are available in stub or extended DOC
|
|
REF 23286 00
Very light (270 g for a pair size 10) and comfortable, this flexible glove is also machine washable. A GORE-TEX® membrane brings an ultimate barrier protection.
The ease of hand movement combined with a perfect fit ensures a high level of dexterity. As a result, time spent in hazardous area is reduced as the level of productivity and quality is increased.
|
|
|
|
