|
|
|
|
|
|
Sandvik Coromant’s new GC1125 grade lives up to the demands of the leading parting and grooving tooling system, CoroCut® 1-2 edge and is now the first choice to achieve improved performance in parting, grooving, turning and profiling operations in a wide geometry range.
The optimization of properties for this grade delivers a wider application area and the capacity to handle improved cutting data. GC1125 has a good all round ability and provides the means to improve performance in a wide geometry range across many parting, grooving, turning and profiling operations. It is the first choice for application in steel and stainless steels and excels when machining cast iron and HRSA materials.
These advantages result from a technological breakthrough in coating and substrate technology. The combination improves wear resistance and security, either when running at higher cutting speeds or for a longer time in cut. The coating is new, PVD with TiAIN layers, including properties designed for the GC1125’s wide application area. New, fine grained substrate optimised for steels and stainless steels has improved hardness and supports increases in cutting data.
GC1125 is a simpler option, enabling machine shops to do more with one grade. Its wide geometry range offers improved performance to a larger number of machining operations.
In parting, it is optimised for steels, stainless steels and HRSA materials, a first choice in CF and CR geometries. CF is the low feed choice, giving excellent chip control and surface finish, CR the strong geometry for parting off bars and interrupted cuts at high feeds.
|
|
ISCAR-GRIP
Parting Inserts
DO-GRIP
First choice for parting. Double-ended inserts. Self clamped for deep grooving and large diameters. Screw clamped for small diameters.
SELF-GRIP
Single-ended insert for deep grooving and large diameters. Has a stopper for high radial accuracy.
CUT-GRIP
Single-ended insert. Self and screw clamped options. For tool users.
DO-GRIP for Swiss Automatics. The most economical, double-ended parting and grooving inserts in 1.0 - 3.0 mm (.039 - .118") widths that can be mounted on small shank 8, 10, and 12 mm (.315, .394, and .472") holders. The new design has a very short clamping head and with a slanted screw for convenient
indexing. These features are essential for operating on Swiss type automatic machines that have very limited space.
DO-GRIP is an optimal solution for grooving and parting of small shafts and tubes.
|
|
Sandvik Coromant is now extending its premium program of cutting tools for parting and grooving which will, no doubt, have great influence on machining productivity.
CoroCut 3 brings a third cutting edge to the shallow parting of tubes, bars and grooving operations. The extremely small parting widths in 2,0, 1,5 and 1,0 mm facilitates will reduce the raw material usage considerably.
The insert is held securely by a unique clamping solution ensuring accurate location and easy to use. This in combination with very tight indexing tolerances will produce workpieces with very close length tolerances.
Two dedicated insert geometries ensure peak performance and excellent surface finish in all workpiece materials. The very same holder can be used for all insert widths giving maximum versatility.
|
|
|
|
|
|
Grooving and Parting-Off applications just got better. Introducing TGP25 and TGP45 - new grades, new technology with DURATOMICTM coating gives impressive results.
Not only do these two grades feature the Duratomic coating technology, they also mark the beginning of a new generation for grooving and parting-off. Although designed for steel machining, these grades can also be used in cast iron and stainless steel with excellent results.
TGP25 - THE NEW GRADE FOR GROOVE TURNING
The unique and secure clamping system of Seco Multi Directional Turning (MDT) allows high speeds and feeds while securing long and consistent tool life.
The rigidity of Seco MDT can be used to fully exploit the extended cutting data capability of TGP25. Available in all widths, corner radii and chipbreakers,
TGP25 gives outstanding performance over a large application area and its superior edge integrity ensures an excellent surface finish too.
TGP45 - THE LATEST GRADE FOR PARTING-OFF
Team up the impressive stability of the HSS-blades for parting-off with 150.10 inserts and you can take full advantage of the cutting data capabilities of TGP45.
With superb performance in a wide application area, TGP45 is available in the most common widths and chipbreakers. It has a high level of wear resistance and allows high cutting data together with long tool life. The superior edge integrity will give you an excellent surface finish as well.
TGP45 is also a good choice for milling when using 335.10 disc milling cutters.
|
|
| ... products without technical information |
| |
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
Retsch SM 2000 cutting mills are especially high performance and user-friendly machines for crushing tough, medium-hard, soft, elastic, brittle and fibrous materials. Running slowly or quickly with different rotors and hoppers, they crush a wide range of materials, eg:: waste samples, plastic parts, biological substances, food and animal feed and beverage cans. The SM 2000 mills are therefore ideal for research, testing and operational laboratories, for technical training facilities or for creating samples in production.
Further model: SM 100.
Product Advantages:
powerful size reduction, even of heterogeneous mixtures
defined final fineness
low heat build-up
wide range of accessories for universal use
central locking device
fold-back housing
easy cleaning
robust, safe design
2-year warranty, CE-conforming
|
|
|
|
|
|
In foodstuff laboratories, in chemical or biological research institutions - suitable analysis material is required everywhere for precise examination of foodstuffs. With the GRINDOMIX Knife Mill, Retsch now produces a grinding and homogenising machine that fulfills professional laboratory and analysis requirements. It processes foodstuffs with high water, oil or fat contents just as rapidly and reliably as dry, soft or medium-hard products. For the first time, Retsch provides a professional alternative to standard household mixers.
With the special cutting knife system and the variable grinding chamber of the Grindomix, the materials can be processed into an homogeneous analysis sample, quick and easy. Two straight knives at different heights, arranged at right angles to the direction of rotation, turn at a speed between 2,000 and 10,000 rpm in the centre of the mill vessel.
Product Advantages:
powerful speed-controlled 750 W industrial motor
speed pre-selectable, range 2000 - 10000 min-1
digital display of grinding time and speed
interval operation possible
three memory keys
gravity lid for automatic grinding chamber volume adaption
comprehensive range of accessories
sample vessel easy to clean and exchange
|
|
|
|
|
|
Cutting mills are particularly well suited for comminution of soft to medium-hard, fibrous or tough materials (including plastics). They are frequently also used in the preparation of heterogeneous substance mixtures and for sample preparation for RoHS and WEEE analysis. In this type of mill, samples are comminuted through cutting and shearing. The fineness is determined by a sieve insert.
Various knife geometries and replaceable blades ensure maximum flexibility and durability. Grinding parts of various steel types as well as of hardmetal tungsten carbide can be used for controlling the abrasion problems.
All grinding parts can be removed for cleaning in just a few seconds without tools – unbeatable fast, simple and efficient!
YOUR ADVANTAGES WITH FRITSCH CUTTING MILLS
- Especially simple operation for fast work
- Unmatched ease of cleaning thanks to patented quick opening facility
- Optimum airflow for particularly fast grinding and secure protection against clogging
- More stable running and low wear due to the patented double cone bearing of the rotor
- Exceptionally long service life through use of replaceable and fixed knives
- Unique grinding chamber geometry: minimal dead space and progressive cutting geometry between the rotor and the fixed knives – for faster and simpler operation
- Grinding parts with different cutting geometries and materials - perfectly adjustable to your application
By the way:
FRITSCH Cutting Mills are available in different configurations – for each application the perfect Mill!
|
|
| ... products without technical information |
| |
UNIQUE GLOBAL SUPPLIER !
With the AXXAIR global concept you may upgrade the tube cutting machines from:
· simple orbital cutting
· to automatic orbital cutting
· to automatic orbital cutting and welding for prefab applications: CC+SASL
· to traditional orbital welding with closed heads: SASL+SATF
IN A FEW MINUTES ONLY !
|
|
|
The Modular Drive System from Bug-O Systems can provide continuous welding at precise travel speeds, producing flawless welds in a fraction of the time required by hand welding. Various types of rail allow the system to be used on all types of work. Alternative Control Modules allow the system to perform continuous stringer welding, weave welding, stripping, beveling and programmable shape cutting.
|
|
|
|
|
|
The KatII incorporates everything required to automate your
cutting/ welding operations...quickly, easily, economically. It is
comprised of the Kat II travel carriage and rigid 8 ft. (2438mm)
straight track and torch or gun holder assembly. The carriage
travels in a forward or reverse direction (vertical or horizontal) on
its track, moving the torch or welding gun along the pre-set path
at precisely controlled speeds. The accuracy, uniformity and
quality of the cut or weld is improved. Productivity is increased.
Costs reduced. It is important to note that the Kat II carriage is
not designed to travel on radius roll formed track.
AND...YOU CAN EASILY CONVERT YOUR KAT II
INTO AN EXCELLENT CIRCLE CUTTING MACHINE
This Gullco accessory, comprised of undercarriage, radius
arm and centering pin, eliminates the need for track. The
travel carriage is readily fitted on the top of the undercarriage.
Its drive system engages the undercarriage gears
...moving the assembly in a forward or reverse direction
at desired cutting speeds along a perfectly circular path. A
slide lock on the radius arm allows fast, easy adjustment of
II the circular diameter.
|
|
Submerged arc welding (SAW) is a highly efficient automation welding method. There are numerous customers around the world who currently weld in ESAB applications. Our large range of pressure welding heads in the A2 and A6 series are the basis of our SAW-welding automations, such as welding beam-travelling carriages, welding tractors, welding portals and length welding fixtures. Depending on the application, fully automatic SAW welding can be carried out with one or more pressure welding heads at the same time. Each head has single welding wire or twin welding wires or other highly productive solutions.
At ESAB we have turnkey solutions for automated SAW welding and have also developed accompanying equipment, such as fully automatic flux management systems and seam tracking systems for maximum optimisation and profitability for our customers.
|
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications
|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
ALFA range is designed for automatically punching, marking and shearing of profiles. Therefore, the final part is obtained in a whole and single process increasing the efficiency and erasing loss of time.
Automatic line CNC controlled for punching, marking and shearing profiles. This solution is ideal for metallic constructors. The bars (flat bars up to 500x400 mm, and angles up to 150x150x15 mm) up to 12 m long are pushed and clamped by a carriage. Material is always guided by lateral roller against line reference.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
PT-1052-1 - 6" Diagonal Cutting Pliers
PT-1057-1 - 7" Diagonal Cutting Pliers
PT-1060-1 - 7" Large Diagonal Cutting Pliers
PT-1105 - 5" Curved Jaw Locking Pliers
PT-1150 - 5-1/2" Midget Diagonal Cutting Pliers
|
|
Side cutting pliers, 2101D
Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip.
ISO: 5749 DIN: 5749
Finish: Black oxidised, anti-corrosion treated.
Material: Chrome-Vanadium steel. PVC coated handles without return spring.
Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces.
Cutting capacity: Piano wire.
IP = Industrial Pack
|
|
Better cutting - manual cutting systems
the ergonomically formed cutting carriage with cutter cassette cuts with absolute safety in both directions.
The cutter cassette can be replaced in one easy operation.
cassette with circular knife for paper, corrugated board etc.
cassette with blade for film
for use with roll material, such as paper, corrugated board or foil, we offer you the time-tested cutting systems with dispenser
freestanding or directly at the packing location
with changeable cutting cassette
standard cutting widths up to 160 cm, vertical cutting stand up to 200 cm
|
|
|
|
see the results for the following category : 
