|
|
|
|
|
|
Sandvik Coromant’s new GC1125 grade lives up to the demands of the leading parting and grooving tooling system, CoroCut® 1-2 edge and is now the first choice to achieve improved performance in parting, grooving, turning and profiling operations in a wide geometry range.
The optimization of properties for this grade delivers a wider application area and the capacity to handle improved cutting data. GC1125 has a good all round ability and provides the means to improve performance in a wide geometry range across many parting, grooving, turning and profiling operations. It is the first choice for application in steel and stainless steels and excels when machining cast iron and HRSA materials.
These advantages result from a technological breakthrough in coating and substrate technology. The combination improves wear resistance and security, either when running at higher cutting speeds or for a longer time in cut. The coating is new, PVD with TiAIN layers, including properties designed for the GC1125’s wide application area. New, fine grained substrate optimised for steels and stainless steels has improved hardness and supports increases in cutting data.
GC1125 is a simpler option, enabling machine shops to do more with one grade. Its wide geometry range offers improved performance to a larger number of machining operations.
In parting, it is optimised for steels, stainless steels and HRSA materials, a first choice in CF and CR geometries. CF is the low feed choice, giving excellent chip control and surface finish, CR the strong geometry for parting off bars and interrupted cuts at high feeds.
|
|
ISCAR-GRIP
Parting Inserts
DO-GRIP
First choice for parting. Double-ended inserts. Self clamped for deep grooving and large diameters. Screw clamped for small diameters.
SELF-GRIP
Single-ended insert for deep grooving and large diameters. Has a stopper for high radial accuracy.
CUT-GRIP
Single-ended insert. Self and screw clamped options. For tool users.
DO-GRIP for Swiss Automatics. The most economical, double-ended parting and grooving inserts in 1.0 - 3.0 mm (.039 - .118") widths that can be mounted on small shank 8, 10, and 12 mm (.315, .394, and .472") holders. The new design has a very short clamping head and with a slanted screw for convenient
indexing. These features are essential for operating on Swiss type automatic machines that have very limited space.
DO-GRIP is an optimal solution for grooving and parting of small shafts and tubes.
|
|
Sandvik Coromant is now extending its premium program of cutting tools for parting and grooving which will, no doubt, have great influence on machining productivity.
CoroCut 3 brings a third cutting edge to the shallow parting of tubes, bars and grooving operations. The extremely small parting widths in 2,0, 1,5 and 1,0 mm facilitates will reduce the raw material usage considerably.
The insert is held securely by a unique clamping solution ensuring accurate location and easy to use. This in combination with very tight indexing tolerances will produce workpieces with very close length tolerances.
Two dedicated insert geometries ensure peak performance and excellent surface finish in all workpiece materials. The very same holder can be used for all insert widths giving maximum versatility.
|
|
|
|
|
|
Grooving and Parting-Off applications just got better. Introducing TGP25 and TGP45 - new grades, new technology with DURATOMICTM coating gives impressive results.
Not only do these two grades feature the Duratomic coating technology, they also mark the beginning of a new generation for grooving and parting-off. Although designed for steel machining, these grades can also be used in cast iron and stainless steel with excellent results.
TGP25 - THE NEW GRADE FOR GROOVE TURNING
The unique and secure clamping system of Seco Multi Directional Turning (MDT) allows high speeds and feeds while securing long and consistent tool life.
The rigidity of Seco MDT can be used to fully exploit the extended cutting data capability of TGP25. Available in all widths, corner radii and chipbreakers,
TGP25 gives outstanding performance over a large application area and its superior edge integrity ensures an excellent surface finish too.
TGP45 - THE LATEST GRADE FOR PARTING-OFF
Team up the impressive stability of the HSS-blades for parting-off with 150.10 inserts and you can take full advantage of the cutting data capabilities of TGP45.
With superb performance in a wide application area, TGP45 is available in the most common widths and chipbreakers. It has a high level of wear resistance and allows high cutting data together with long tool life. The superior edge integrity will give you an excellent surface finish as well.
TGP45 is also a good choice for milling when using 335.10 disc milling cutters.
|
|
| ... products without technical information |
| |
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications
|
|
PT-1052-1 - 6" Diagonal Cutting Pliers
PT-1057-1 - 7" Diagonal Cutting Pliers
PT-1060-1 - 7" Large Diagonal Cutting Pliers
PT-1105 - 5" Curved Jaw Locking Pliers
PT-1150 - 5-1/2" Midget Diagonal Cutting Pliers
|
|
Side cutting pliers, 2101D
Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip.
ISO: 5749 DIN: 5749
Finish: Black oxidised, anti-corrosion treated.
Material: Chrome-Vanadium steel. PVC coated handles without return spring.
Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces.
Cutting capacity: Piano wire.
IP = Industrial Pack
|
|
Better cutting - manual cutting systems
the ergonomically formed cutting carriage with cutter cassette cuts with absolute safety in both directions.
The cutter cassette can be replaced in one easy operation.
cassette with circular knife for paper, corrugated board etc.
cassette with blade for film
for use with roll material, such as paper, corrugated board or foil, we offer you the time-tested cutting systems with dispenser
freestanding or directly at the packing location
with changeable cutting cassette
standard cutting widths up to 160 cm, vertical cutting stand up to 200 cm
|
|
The development of robotics has led MATRASUR Composites to widen its equipment offer, manual and automatic by integrating an internal Robotic Service in the company, completely dedicated to the design of robotic solutions.
The Usimat robot line integrates robotised machining and trimming operations of finished parts into the production process. This type of robot is capable, according to its configuration, to detect the position of a part in space before trimming. There is a large diversity of tools (drill, mill, reamer, disc, etc.) to adapt to numerous applications in the machining and trimming fields.
|
|
Motoman’s HP20 robot provides a powerful solution to meet your automation needs
CUTTING • DISPENSING • HANDLING
MACHINE TENDING • PACKAGING • MATERIAL REMOVAL
|
|
| ... products without technical information |
| |
PT-1052-1 - 6" Diagonal Cutting Pliers
PT-1057-1 - 7" Diagonal Cutting Pliers
PT-1060-1 - 7" Large Diagonal Cutting Pliers
PT-1105 - 5" Curved Jaw Locking Pliers
PT-1150 - 5-1/2" Midget Diagonal Cutting Pliers
|
|
Side cutting pliers, 2101D
Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip.
ISO: 5749 DIN: 5749
Finish: Black oxidised, anti-corrosion treated.
Material: Chrome-Vanadium steel. PVC coated handles without return spring.
Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces.
Cutting capacity: Piano wire.
IP = Industrial Pack
|
|
Design:
- For multi-purpose torch systems
- For hand cutting torches
- Cutting range up to 500 mm
Advantages:
- Carefully selected materials guarantee high cutting quality and increased cutting output
- Perfectly matched combination of torches and nozzles enables most reliable operation
- Special surface protection ensures long service life
- All cutting nozzles individually tested for quality assurance
- Reliable arrangement of ducts and slots allows easy cleaning with special nozzle cleaning drills
Product Range:
- Ring-/slot cutting nozzles
- Block cutting nozzles
- Gas-mixing cutting nozzles
- Accessories
|
|
|
|
|
|
Whatever your application, whatever your fuel gas, there's a Smith SlicerTM tip to provide fast, economical and quality cutting. Soft seats are not prone to damage like metal-to-metal seats, providing consistent seating and much longer life than metal to metal seats.
FEATURE BENEFITS
1. In-Tip Mix Provides Added Resistance to Flashback
Each tip is a precision engineered mixer for combining preheat oxygen and fuel gas to attain maximum efficiency.
2. Slip-In Design Saves Time and Money
Quick, easy tip change encourages use of right tip for the job.
3. Hand Tighten Tips - No Wrench Needed!
After the first tightening with a wrench, all that's needed to seat the tip snugly is hand-tightening. No need to search for a wrench to change tips; threads on tip nut won't be stripped by over-tightening.
4. Soft Graf-Tite® Flexible Seats End Reseating Repairs
Compressible soft seats are practically indestructible and they withstand very high temperatures, resulting in longer tip life.
5. Fully Swaged Tip Minimizes Gas Turbulence
Mirror smooth gas passages deliver stable gas flows for high heat transfer, fast starts and clean cuts, also, minimizes slag build-up, and reduces clean-up time.
6. Concave Shaped Tip End
Reduces backfire and resists flameout when making accidental contact with base metal during cutting operations.
7. Removable High Pressure Seat
Allows cleaning from back of tip.
|
|
Water jet cutting technology has asserted itself to an ever increasing degree against competing technologies. Highly wear resistant carbide nozzles are a major fact for the cutting result. The main areas of application are the automotive, packaging and aerospace industries, mechanical engineering and electronics.
Water jet cutting has a number of advantages:
- cutting takes place at room temperature (thermal stress is avoided)
- only one tool is used: the water jet
- no limits as to materials that can be cut: ranging from stone, composites, plastics, metals ... up to a thickness of 150 mm.
- a clean job: as opposed to thermal procedures, water jet cutting is emission-free
|
|
|
|
|
|
Gas Cutting Tip: Only the original Koike oxy fuel cutting tips: 102, 102HC, 102-D7, 103, 103-D7, 106, 106HC, 106-D7, 107 and 107-D7 are designed and manufactured to provide high quality cutting, safe operation, longer cutting life, high speed cutting and save gas costs. In addition our 100 series cutting tip can be used to replace Airco® style cutting tips.
All Koike 100 Series cutting tips are designed to mix the fuel and the oxygen used for preheating inside the cutting tip. This is recognized as one of the safest methods. Koike 100 series torches carry a lifetime warranty against a damaging sustained flashback while using genuine Koike cutting tips (excludes IK-82).
The Koike D7 cutting tips are one of the most technically advanced cutting tips available, providing safety and accuracy while saving money in time and gas costs. Our high speed D7 Series of Cutting tips with a divergent tip increase cutting speed 20-28% over standard tips and Gas consumption is reduced up to 26%. A stainless steel liner helps them last up to 5 times longer than other tips.
|
|
Lechler high-pressure solid stream nozzles
We have a wide range of special hardened stainless steel nozzles for high-pressure applications, with carbide metal inserts as an option.
High-pressure solid stream nozzles produce a closed, stable, powerful solid jet that does not break away, even at very high pressur
|
|
|
Lechler flat fan nozzles stand for uniform liquid and distribution. Particularly high energy jets are generated with spray angles up to 60°. Nozzles with small flow rates are especially suited for humidifying and spraying in general. The flow geometry of the nozzle allows to produce accurate, compact jets, available with different distribution patterns.
|
|
|
A wide variety of nozzles are available for all types of drill bits and unique applications requiring precise flow control.
|
|
QS-AW Collision Sensor
The QS-AW is a dynamically variable collision sensor that operates on an air pressure system.
A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.
Factory-proven and engineered to withstand the harsh realities of these applications, QS-AW is the collision sensor specifically designed for arc welding, plasma cutting and laser cutting.
Key Benefits
-Positive, variable air pressure to hold the QS-AW rigid during normal operation, resulting in more accurate welds and cuts
-Permanent repeatability
-Detects angular, rotational and compressive forces
-Common mounting flange to work with a variety of torches
-Flat plate or stem mount available
-Built-in harsh environment shielding
|
|
|
Modern cutting techniques produce a wide range of harmful by-products (water, dust, chips and shavings...). ASP covers are made of industrial fabrics specially designed to resist such conditions. They are tailor-made specifically to fit into this work environment perfectly.
|
|
|
|
see the results for the following category : 
