|
|
FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.
It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.
Features
* 1,2 kW nominal ultrasonic power
* Available in 30 kHz or 40 kHz frequency
* Cabinet mounting
* Power, Sweep and Booster controls with outer signals
* Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.
|
|
|
|
|
|
Novatec’s production includes a wide range of standard installations.
Cleaning and Drying Systems: ultrasonic cleaning and rinsing both standard and according to the customer’s specific requests. Modular surface treatment systems for immersion and/or spray treatment with single or cascading stages. Hot air dryers, infra-red and vacuum dryers, centrifugal dryers. Solvent dryers, ultrasonic degreasing machines, spray-cleaning machines. – Compact ultrasonic cleaning Tanks for laboratory or research applications.
Ultrasonics: piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 18 to 100 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
Automation: 2 or 3 axes handling systems with load capacity up to 1000 kg.
Air and Water treatment: water softeners, reverse osmosis, active carbon water filtration systems and manual or automatic water demineralising systems, ultra-filtration systems and evaporators under vacuum which allow to work environment-friendly. Extraction, filtration and air treatment systems (powders and vapours), clean rooms.
Painting: manual or automatic water veil or dry cabins, pre-drying modules and dryers.
NDT: Automatic FPI Dye-Pen, wash and developer systems.
|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
...
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
Ultrasonic Generators
- 40 kHz "Simultaneous Multi-Frequency" (optional 68/170 kHz)
- 500, 750, 1000 Watts 120 VAC 50/60 Hz (optional 230/240 Volt)
- Capable of Continuous Operation
- Power Intensity Control
- 4 kHz Sweep Output with Adjustable Sweep Rate 300 to 1000 Hz
- Protected from Shorts or Opens in Output
- Dimensions of 5.25" W x 13.75" L x 12.5" H (13.3 cm W x 34.9 cm L x 31.75 cm H)
- Optional I/O Control Signals
- Full Two Year Guarantee
|
|
ITF ultrasonic devices are the result of many years of tests cooperating with electronic experts and have got all the advantages which up-to-dated technology can offer nowadays.
Particularly:
• Weight and volume reduction so to permit one single-card execution for any generator.
• Wide range of controls and safety features in compliance with European Standards.
• DEGAS feature reducing time taken to get baths degassing.
• Microprocessor used to manage output and variation, control and self-diagnostics. This also permits to get remote diagnostics since there is the opportunity of a modem connection, the opportunity to set output power to supply transducers of different power and the opportunity to drive more transducers with one generator.
|
|
SINAPTEC developed a complete range of generators of energy to be associated with an ultrasonic applicator.
* The NEXUS puts: this generator of power ultrasounds is a simple solution and economic in an industrial environment. Its obstruction minimum and its design allow an easy integration in a cupboard or other. The parameter setting by switches makes it possible to use the mode of frequency controlled or modulated for a homogeneous distribution of the ultrasonic field.
* The NEXUS rack: by assembly from 1 to 3 racks; Maintenance is facilitated by the maximum dismantling of the racks.1600Wc by rack. Orders on the generator or off-set.
|
|
| ... products without technical information |
| |
Powerful compact sweeper for various applications. Excellent manoeuvrability and all-round view on sweeper and attached implements. Allows economical municipal use. Unique combination of professional sweeper and implements for complete winter service and efficient grounds maintenance. The Hako-Citymaster is serially equipped with integrated powerful and ultra-quiet exhaust air return.
Optional noise damping to 99 dB (A).
|
|
For more sweeping and less transit time. With a choice of flexible disposal concepts.
Sound-proofed, low vibration, suspended cabin. Clean water tank with a capacity of 150 litres. Water spraying jets on the plate brushes for dust control in sensitive
working areas. Service-friendly; easy access to all components.
Ergonomically designed workplace with excellent all round view. All controls in direct view and reach of the operator.
Extremely manoeuvrable as a result of the new damped articulated steering. Safe driving without swaying motion even in tricky applications.
|
|
The bema Agrar was developed for agricultural use and offers you an optimal solution in keeping your property clean.
Whether mounted in the back or front, the bema Agrar is a cleaning helper you just can’t do without.
|
|
Technical Data
- Scrubbing width [mm] 750
- Squeegee width[mm] 1010
- No. of brushes 2 (rullo)
- Productivity [sqm/h] 4875
- Solution tank capacity [l] 145
- Recovery tank capacity [l] 170
- Power installed 36V (6x6V)
- Max speed [Km/h] 6,5
- Weight (net) [Kg] 300
- Dimensions (LxWxH) [mm] 1810x1050x1360
|
|
* Huge window area
* Fully adjustable suspended seat
* Suspended passenger seat (option)
* Easy access to the front of the sweeper
* Joystick for a complete control of the third brush (option)
* Neutral sitting position
* Vibration isolated cabin
* Sound proof cabin
|
|
Main benefits
* Huge window area
* Fully adjustable suspended seat
* Suspended passenger seat (option)
* Easy access to the front of the sweeper
* Joystick for a complete control of the third brush (option)
* Neutral sitting position
* Vibration isolated cabin
* Sound proof cabin
|
|
Technical Data
- Max working width [mm] 1460
- Main brush width [mm] 800
- Prodctivity [sqm/h] 11680
- Dirt container volume [l] 150
- Max dumping height [mm] 1430
- Power supply Diesel 24V - Lombardini motor 6,3kW 8,6 HP
Diesel 24V - Yanmar motor 5,7kW 7,7 HP
- Filter surface [sqm] 4
- Max speed [Km/h] 8
- Weight (net) [Kg] 613,5
- Dimensions (LxWxH) [mm] 1600x1199x1360
|
|
... see all the products in the category
Sweepers
|
PowerWash programme
The force behind high-pressure cleaning
Gates' specialist hose and coupling programme designed for powerful performance in high-pressure cleaning systems.
Key benefits:
- First-class resistance to aggressive cleaning agents, high temperatures, high pressures, abrasion, oil and mechanical wear
- Lightweight
- Highly flexible
- Easy to handle
- Available in three colours: black, grey and blue. Grey and blue PowerWash hoses are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance
- Including a comprehensive range of couplings for compatibility with industry's needs and PowerWash sleeves to protect your couplings in the most demanding environments
|
|
Goodyear has a wide range of Pressure wash / Cleaning hoses available. Hoses for high pressure washer equipment and well as our special 'Fortress' range of hoses with Microban cover protection for use in food processing plants, diaries, breweries etc.
Visit our website below for a complete list of the hoses available.
Food Washdown hoses can be found on :
http://www.goodyearindustrialproducts.com/cgi-bin/industrialhose/product_search.pl?application_ID=20&search_app_ID=Go%21
|
|
Goodyear has a wide range of Pressure wash / Cleaning hoses available. Hoses for high pressure washer equipment and well as our special 'Fortress' range of hoses with Microban cover protection for use in food processing plants, diaries, breweries etc.
Visit our website below for a complete list of the hoses available.
|
|
High pressure jetting
TRELLJET 561
For professional and industrial high pressure cleaning.
Suitable for mobile pressure washers and fixed installations.
Also suits reel mounted applications.
From 6 to 13 mm.
|
|
Recommended for:
Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance service applications. Grey and blue PowerWash are suitable for use in hospitals, swimming pools and other applications where hygiene is of the utmost importance. Not recommended for steam service.
Couplings: MegaCrimp®.
|
|
The water cleaning hose range is dedicated to hobby and professional water cleaning machines, with cold and hot water (not suitable for vapour steam applications).
It is designed according to safety norm IEC-2 with safety factor burst/working pressure 4:1.
The water blasting hose range is designed with criteria of maximum robustness and easy handling, complete with adedicated fitting solution, in consideration of safety and performance aspects connected with blasting applications.
Safety factor burst/working pressure is 2,5:1, it complies with international specifications (AS/NZ 4233.2, RMA-USA, ISO7751, BFPA-UK, prEN1829-2).
|
|
| ... products without technical information |
| |
|
... see all the products in the category
Hoses
|
|
|
see the results for the following category : 
