|
|
FinnSonic FSG-121 is a reliable medium power ultrasonic generator with Power Booster and Frequency Sweep.
It's unique Power Booster gives additional boost for tough cleaning applications. FinnSonic FSG-121 is available in 30 kHz or 40 kHz frequency.
Features
* 1,2 kW nominal ultrasonic power
* Available in 30 kHz or 40 kHz frequency
* Cabinet mounting
* Power, Sweep and Booster controls with outer signals
* Protection and automatic reset against short circuit, overcurrent, low voltage and overtemperature.
|
|
|
|
|
|
Novatec’s production includes a wide range of standard installations.
Cleaning and Drying Systems: ultrasonic cleaning and rinsing both standard and according to the customer’s specific requests. Modular surface treatment systems for immersion and/or spray treatment with single or cascading stages. Hot air dryers, infra-red and vacuum dryers, centrifugal dryers. Solvent dryers, ultrasonic degreasing machines, spray-cleaning machines. – Compact ultrasonic cleaning Tanks for laboratory or research applications.
Ultrasonics: piezoelectric and magnetostrictive ultrasonic generators, flanged or bulkhead mount submersible transducers. Available work frequencies from 18 to 100 kHz. Modular construction of the piezoelectric units allow to supply a generator also with different frequencies.
Automation: 2 or 3 axes handling systems with load capacity up to 1000 kg.
Air and Water treatment: water softeners, reverse osmosis, active carbon water filtration systems and manual or automatic water demineralising systems, ultra-filtration systems and evaporators under vacuum which allow to work environment-friendly. Extraction, filtration and air treatment systems (powders and vapours), clean rooms.
Painting: manual or automatic water veil or dry cabins, pre-drying modules and dryers.
NDT: Automatic FPI Dye-Pen, wash and developer systems.
|
|
Generators (power supplies) create the high frequency energy that produces cavitation in the cleaning tank. Branson offers the broadest spectrum of equipment in the industry, including both magnetostrictive equipment and piezoelectric units with features like line/load regulation, true variable power control, sweep frequencies, power modulation and power monitoring.
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
|
|
Power Sonics has several exclusive individual portable ultrasonic generators to significantly improve quality, reliability and performance of ultrasonic cleaning equipment and power our line of transducers.
GM Generator is a completely redesigned generator featuring IGBT technology and has a unique load compensating circuit that is particularly effective in gaseous solutions. A replaceable and cleanable filter is included over the air-cooling fan. The GM replaces the GL generator and provides the same improved cavitation and uniformity under less than ideal operating conditions. These generators power both the Type IP immersible transducers and the CT Type tanks (Transducerized Console Tanks).
|
|
are tried and tested devices which have been specifically developed for the high demands of industrial cleaning technology.
Due to their modular design they are perfectly suited for all applications.
• Constant power output – continuously adjustable
between 40 – 100 %
• Constant oscillation amplitude
• Interface for monitoring and controlling
process-relevant functions
• Protection from short-circuit, no-load operation,
overload and overheating comes as standard
• Standard frequencies: 25, 30, 40 and 80 to 150 kHz
Other frequencies available on request
|
|
|
|
|
|
State of the Art Ultrasonic Generator Technology
Blackstone-NEY Ultrasonics is a recognized leader in ultrasonic generator technology (Technical papers). Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream of development and patents covering new ultrasonic generator and transducer technology from Blackstone-NEY Ultrasonics. Entire families of generators meeting the specific needs of a growing list of applications are now available.
multiSONIK™ 2
Blackstone~NEY Ultrasonics introduces the multiSONIK™2 Multiple Frequency Ultrasonic Generator. Representing a major breakthrough in ultrasonic parts cleaning technology, the multiSONIK™2 is an advanced, digital ultrasonic generator that provides the ability to select and program single or multiple frequencies in a single process tank.
The multiSONIK™2 generator, featuring Blackstone~NEY Ultrasonics' patented dual sweep technology, can operate at frequencies of 40, 80, 120, 140, 170, 220 and 270 kHz according to a binary coded input. When it is teamed with our unique universal transducers, cleaning performance is optimized to a level that is unmatched using conventional ultrasonic cleaning hardware.
...
|
|
Ultrasonic Generator Specification:
- Chassis case designed to allow access from all sides
- Case for generator complete with power lead
- Full range of variable frequency sweep control
- Full range of variable power control
- On/Off switch with output power indicator
- 240v, 50hz supply
- Maximum 750 watt power output (nominal 500watt)
- Utilising MOSFET technology
- Fully tried and tested in the field
- Fully protected against open and short circuit output
- CE certified
|
|
Ultrasonic Generators
- 40 kHz "Simultaneous Multi-Frequency" (optional 68/170 kHz)
- 500, 750, 1000 Watts 120 VAC 50/60 Hz (optional 230/240 Volt)
- Capable of Continuous Operation
- Power Intensity Control
- 4 kHz Sweep Output with Adjustable Sweep Rate 300 to 1000 Hz
- Protected from Shorts or Opens in Output
- Dimensions of 5.25" W x 13.75" L x 12.5" H (13.3 cm W x 34.9 cm L x 31.75 cm H)
- Optional I/O Control Signals
- Full Two Year Guarantee
|
|
ITF ultrasonic devices are the result of many years of tests cooperating with electronic experts and have got all the advantages which up-to-dated technology can offer nowadays.
Particularly:
• Weight and volume reduction so to permit one single-card execution for any generator.
• Wide range of controls and safety features in compliance with European Standards.
• DEGAS feature reducing time taken to get baths degassing.
• Microprocessor used to manage output and variation, control and self-diagnostics. This also permits to get remote diagnostics since there is the opportunity of a modem connection, the opportunity to set output power to supply transducers of different power and the opportunity to drive more transducers with one generator.
|
|
SINAPTEC developed a complete range of generators of energy to be associated with an ultrasonic applicator.
* The NEXUS puts: this generator of power ultrasounds is a simple solution and economic in an industrial environment. Its obstruction minimum and its design allow an easy integration in a cupboard or other. The parameter setting by switches makes it possible to use the mode of frequency controlled or modulated for a homogeneous distribution of the ultrasonic field.
* The NEXUS rack: by assembly from 1 to 3 racks; Maintenance is facilitated by the maximum dismantling of the racks.1600Wc by rack. Orders on the generator or off-set.
|
|
| ... products without technical information |
| |
|
|
|
|
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of a centrifugal fan.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet.
-Heat exchanger dimensioned in order to obtain performances superior to 90%, made with AISI-430 stainless steel.
-Combustion chamber made with AISI-304 stainless steel.
-Control panel made in a watertight box for avoiding the high humidity degree in greenhouses.
-Reinforced environmental thermostat with 5m hose and fast connector included in the equipment.
-Base equipment prepared with air impulsion grid of simple deflection.
-It can have circular hoppers or any other kind of impulsion pipes coupled on it.
|
|
SYSTEMA introduces the new series of EOLO, suspended warm air heaters able to solve all heating problems, both for total and modular space heating. Compared with traditional heating systems needing a separate cabinet, the new EOLO heaters offer an innovative solution for heating while keeping running costs at a minimum.
This is possible thanks to the fact that EOLOs are completely self-sufficient working units, and that you don?t need to heat up a heat transferring fluid such as water for heating the space. In this way you don't have any needless heat losses.
|
|
Full range of heating cabinets gas or oil fired.
Available in vertical or horizontal versions, inside or outside and able of ducted appications.
Air flow from 6000 to 60000 m3/h and power from 70 to 1120 KW.
High temperature resistant steel exchanger or stainless steel.
For various cases, the body can be double skin.
Filtration optional.
Applications : Industrial buildings heating and/or ventilation with sveral kind of applications for high level confort for users.
This equipment is in accordance with European directive related to gas fired equipment 90/396/CEE under n° 49AQ1369 and 1370 and electro-magnetic compatibility CEM 89/336/CEE and low voltage 73/23/CEE.
|
|
DESCRIPTION:
Gas domestic hot air generator with leakproof operation and smoke outlet through an extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
The basic equipment has the following elements:
- Leakproof combustion with forced draft.
- Combustion oven designed for obtaining a performance of about 90%.
- Three-speed fan (except for the GAS-40 model, which is one-speed).
- Air admission filters.
- Environment thermostat.
- Air impulsion grid on the upper part (GAS-08-12-15).
FUEL:
Natural gas / LPG
APPLICATIONS:
Any kind of premises with a volume between 190 m3 and 980 m3.
|
|
Hot gas generators fabricated by Unitherm Cemcon are designed for direct air heating performed by a firing system. Air to be heated is either supplied by a dilution air fan or is delivered from process with high or low temperatures or combinations of both.
Unitherm Cemcon provides:
* Hot gas generator engineering for supply or local manufacturing
* brick lining material
* Burner (mono block or special designs) incl. operation valve train and fuel supply system
* Diluton air fan
* HGG field instruments for performance and safety control
* HGG control cubicle
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
