|
|
SITRANS FUS1020 offers reliable flow-measurement at a much lower cost than other clamp-on ultrasonic flowmeters, with flow rate accuracy of 1% or better for most applications. Available in single or dual channel configurations, in IP65 (NEMA 4).
|
|
SITRANS FUG1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for natural and process gas applications, including checkmetering, allocation, production, storage and gas fired power station applications. The meter is available in single, dual and optional four beam configurations, with your choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) explosion proof enclosures.
|
|
SITRANS FUS1010 is the most versatile clamp-on ultrasonic flowmeter available today. It can operate in either WideBeam Transit-Time or Reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single, dual channel/dual path and optional four channel/four path configurations. You have a choice of IP65 (NEMA 4X), IP65 (NEMA7) and IP66 (NEMA 7) wall mount enclosures.
|
|
SITRANS FUH1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. The meter has three application areas: Interface detectors, volumetric flowmeters and mass or standard volume flowmeters. Available in single, dual and optional four beam configurations, with choice of IP65 (NEMA 4X) or IP65 (NEMA 7) and IP66 (NEMA 7) wall mount enclosures.
|
|
|
The Series TFXL ultrasonic transit time flow meter is a reliable and cost-effective flow meter designed to replace mechanical meters where liquid conditions damage or impede operation. This non-invasive flow meter requires no maintenance, as it clamps on to the outside of the pipe. It provides a 4-20mA analog and simulated turbine meter frequency output, interfacing with a variety of monitoring equipment. The TFXL is available in an integral mount system for pipes size .5" (12mm) to 2” (50mm), and a remote system for pipes size .5" [12mm] and larger.
|
|
KROHNE’s OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate. The new OPTISONIC 6300 clamp-on flowmeter with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
The FLUXUS ADM 6725 is a portable ultrasonic flowmeter. With its clamp-on transducers and its rechargeable battery, it is an ideal tool for service work.
The clamp-on flow transducers are simply mounted onto the pipe from the outside. Measurement is therefore non-invasive, and no process interruption is necessary for the installation. The transducers are not in direct contact with the medium to be measured and thus in no way submitted to pressure and wear and tear.
All transducer pairs are factory calibrated. All calibration data (including the transducer identification and parameters) is stored permanently in the transducers and is transferred to the transmitter automatically upon connection. This facilitates operation and a zeroing procedure is not necessary.
The user interface is adapted to the detected transducers. The instruments simply asks in a logical sequence for the pipe and medium parameters. The physical properties of a large number of pipe materials and media are stored in an internal data base. The status display enables even the inexperienced user to judge online the quality and precision of the measurement.
|
|
|
The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available.
|
|
MINISONIC P is the new portable flowmeter of Ultraflux. Sturdy, light (850g) and water ingress protected, it is a real practical tool which warranties you quick, sure, accurate and bidirectional flow measurements of liquids. MINISONIC P is associated with clamp-on probes. These probes are easy to install without shut down of the process and no pressure drop.
MINISONIC P main advantages :
- large range of diamters : from 10 mm
- New measurement technology "ESC" (or Echo Shape Control) an ultrasonic signal auto-focus,
- 40 hours battery life
- very high amplification dynamic (89dB) and very efficient sounds immunity in difficult condition of measurement.
- an ergonomic keypad and menu calibration, back-lighted display
- measurement resolution < 0.1 ns
The measurement operating system software on PC allows the capture and the edition of the results
|
|
SITRANS FUP1010 clamp-on non-intrusive ultrasonic flowmeter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam Transit-Time or reflexor (Doppler) mode, making it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single and dual channel or dual path configurations, with your choice of IP67 waterproof or IP40 (NEMA 1) enclosures.
|
|
SITRANS FUE1010 is a highly accurate clamp-on non-intrusive ultrasonic flowmeter for revenue grade thermal energy sub-metering and energy efficiency distribution monitoring, with a real time coefficient of performance (COP) for HVAC systems. The meter is available in single and dual channel or dual path configurations, with your choice of IP65 (NEMA 4X) dedicated wall mount or IP40 (NEMA 1) portable enclosures.
|
|
Product Overview :
The Optopatch patch clamp amplifier from Cairn Research is a general purpose amplifier, incorporating a number of unique features in order to optimise its performance across a wide range of applications. The amplifier is designed for patch clamp recording, with the unique addition of a lock-in amplifier to enable measurement of membrane capacitance and resistance. This built in device has a unique "track-in" mode that keeps the lock-in amplifier in perfect balance, maintaining discrimination between resistance and capacitance and providing linear calibrated resistance and capacitance outputs. The Optopatch includes several other unique features, including our patented optical technique for measuring small currents over a wide bandwidth (up to 200 KHz), and circuitry for protection against overcompensation of series resistance and electrode capacitance, safeguarding your cells during a recording.
Applications :
Single channel recording
Whole cell recording
High resolution capacitance measurement
Fast, high impedance amplifier
Voltammetry
|
|
The High Clamping Grips are distinguished by their unusual design. The high form permits high clamping forces while being easy on the hands.
Material, surface finish:
Base body in black hard thermoplastic,
coating in black soft thermoplastic,
internal thread in brass,
external thread in galvanized steel quality class 5.8
Note:
SYMPA TOUCH High Clamping Grips are available in 3 sizes with internal and external threads.
On request:
Other external threads, screw lengths, versions and colours.
|
|
Material: Steel.
Chemical black finish with a black plastic ball knob.
|
|
ART. A148
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035 code 13).
MAIN INSERT:
Brass blind threaded bush.
SPECIAL REQUESTS:
• It is possible to supply the inserts in different
materials, on request and for quantities.
|
|
The product family Adjustable Clamping Levers covers the following article groups:
- EH 2439. Adjustable Clamping Lever with inner parts from stainless steel (with female thread / screw)
- EH 2440. Adjustable Clamping Lever (with female thread / screw)
- EH 2442. Adjustable Clamping Lever axial bearing (with female thread / screw)
Advantages of axial bearing:
- Double clamping force with same lever size, by reducing the surface
friction.
- Protection of work piece by fixed locating face.
- Little settling due to higher pre-clamping force of bolt, e.g. thread.
|
|
Material:
Handle in precision cast 1.4308,
other steel parts 1.4305
Surface finish:
Handle in stainless steel electrolytic-polish,
steel parts natural finish
On request:
Other internal threads and special versions.
Dimension "H1" available in other lengths at extra charge.
|
|
|
Innovation 2008 - Galletti of implantation passing, with compass and stud - handle to resumption with compass and stud - pressori to puntale and spring in burnished steel and inox.
|
|
| ... products without technical information |
| |
|
Safety Locks similar to Safety Catchers and Safety Brakes are used against failure of lifting members. But in contrast to those they are not suitable to decelerate masses or to dissipate kinetic energy. On the other hand, the rod displacement to build up the holding force is very small, so that this units can be used for a approximitive positioning tasks as well. Furthermore this design principle allows compact solutions even for small rod sizes (smaller than for Safety Catchers). In the field of pneumatic clamping devices the Safety Locks are providing the absolutely highest holding forces in relation to housing dimensions.
|
|
At the very latest when, because of a power failure (intentional or not) or a malfunction something has to be done to safeguard man and machine, hydraulic clamp Ratio-Clamp® - the clamping device from Hänchen - is just what you need.
Boasting a retention force of up to 450 kN, the hydraulic clamp holds the piston rod in whatever position it is in at that particular moment. Without having to rustle up some extra power (no extra energy) and for an unlimited period of time. The clamping device Ratio-Clamp® is approved by the German Technical Inspection Agency (TÜV). Nor does the development of specific solutions (larger rod diameters, intermediate sizes, greater clamping forces…) pose a problem to the Hänchen specialists.
The possibilities for your application:
Rod-Ø from 10 - 140 mm,
clamping forces from
1 - 450 kN. Other
dimensions on request.
Other products of the range of services:
- Hydraulic cylinders
- Test cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts/assembly utilities/accessories
|
|
PClamp clamps and brakes rod loads safely amd quickly. It can be adapted to standard systems such as pneumatic cylinders from leading manufactures (e.g. SMC, Festo= or to individual solutions. Rotatory clamping can also be achieved with PClamp. Certified systems from Employer's Liability Insurance Association can be realised.
Area of application:
Linear rails and guide ways
Clamping of linear axis
Swivel tables
Rotary tables
Spindles, feeders
Rod, piston, spindle clamping
Elevating devices
Hydraulic presses
Hydraulic lifts and elevating tables
Safety catches
Blocking systems
High-lifting devices
|
|
Active without pressure – incredible holding force
The pneumatic Clamping and Braking Element for piston rods RB.
The RB series is based on our proven wedge slide gear principle and is used for clamping and braking without pressure.
This element was developed for deployment on round-shaft guides or piston rods with a surface hardness of min. HCR 54.
The compact design is suitable for shaft diameters of Ø10 to Ø60 and allows holding forces of up to 60,000 N at a pneumatic opening pressure of just 4 bar.
As a specific feature no reset is needed for restarting.
The RB series stands out for its short reaction times. Even in vertical deployment, short braking distance | | |
