|
|
By using the high-frequency welding process, Thimonnier has developed a line of sealing presses to assemble PVC panels which are used in the manufacture of the following items:
swimming pool liners,
above-ground swimming pools,
swimming pool covers,
truck and train tarps,
industrial tarps,
inflatable structures,
taut structures,
shelters,
tents, canopies,
solar protection,
awnings...
The machines may be rail-mounted for performing large welds with programmable travel. Manual and semi-manual solutions are also available.
|
|
|
|
|
|
Hot plate welding is beneficial to manufacturers seeking to join thermoplastic parts where both high-strength and hermetic seals are required, or where parts have complex geometries, such as irregular shape, or curved or internal walls. Several models of hot plate welders are available to accommodate parts up to 72" x 24" in size. Models are available with horizontal or vertical plates. This process is often employed to assemble batteries, fluid reservoirs, lighters, or other challenging plastics joining applications where cost-effective methods and strong seals are crucial.
HH Series Horizontal Hot Plate Welders
Branson's Model HH-15 hot plate welder (at right) combines versatility in a small footprint. The distinctive feature of this welder is its horizontal platen, which enables it to process parts that are not adaptable to standard vertical hot plate welders.
Branson's HH-Series horizontal hot plate welders are complete assembly systems designed to weld parts up to 24" by 72" (610 by 1829 mm), or multiple smaller parts. (Note: the HH24S platen size is 24" by 19"/610 x 483 mm.)
Branson's HV-15 vertical hot plate welder is designed to weld parts up to 15" by 12" (375 by 300 mm), or multiple smaller parts.
Branson's HV-15S Hot Plate Welder is a complete plastics assembly system using a vertical heat platen, coupled with servo-driven holding fixtures, giving the user greater control over weld results than is possible with conventional mechanical stops.
|
|
The ideal assembly solution for medium, contoured, or complex thermoplastic parts. Designed for versatility and easy tooling changeover to accommodate a variety of parts. Typical applications include fuel tanks, reservoirs, taillight lenses, and vent ducts. The welder easily achieves hermetic seals, and finished part weld strength approaches that of the virgin material.
HHB1223P Horizontal Hot Plate Welder
Features
All-pneumatic operation
Unique Rack System coordinates tool platen motion
Single power air cylinder for reduced machine complexity
Two temperature zones standard - Field upgradeable to four zones
Touch screen interface with all digital timing
Controls mounted on space saving pendant arm
Fully adjustable hot plate carrier
Fully enclosed cabinet with exhaust fans
Interior work light
Separate pressure conrols for melt and seal
Vacuum part retention system
Specifications
Maximum heated platen size: 13" x 24" (330 x 610 mm)*
Maximum clamp force 1250 lbs. (5560N)
|
|
|
Hot Plate machines with either contact or non contact technology and Infrared with its suitability for all types of profiled component weld faces.
|
|
A1
AUTOMATIC SINGLE HEAD WELDING MACHINE
Automatic single head welding machine LISI A1 with variable angle from 30° to 180°. Complete with frame support and head protection. Register seam limiting device from 2 to 0,2 mm. Removable heated cutters with automatic regulation of the temperature by digital thermoregulator. Possibility to modificate the material burn-out from 5 to 6 mm by the simply replacement of the positioner. High safety low pressure clampings controlled by a pressure switch. Automatic control of the welding plate temperature by a digital thermoregulator and automatic control of the fusion time by single timers.
|
|
Simple machine operation in the hotplate process goes hand-in-hand with the highest quality and economy requirements. A particular strength of the process is in the joining of more than 2 components (our record: 34 parts for one fuel tank).
* Hot Plate welding machines with contact heating and non-contact heating by means of infrared and gas-convection.
* Complete automated welding lines including parts management by feeding systems, handling solutions.
* Machine concepts in all variations, e.g. rotary table or linear transfer design.
* Robots can be integrated depending on application.
|
|
Single head welding machine SM-1 :
Automatic welding machine without heated Surface knives for Weld seam restriction 0,8 mm.
Length clamping unit guiding case, therefore to reach welding tolerances.
Quick and easy possibility of change to Angles 30° until 180°.
Easy changing of the welding foil Quick clamping ledge.
Easy cleaning of the welding mirror inService position.
Safety clamping cylinder with 2-step pneumaticSystem.
Height of profile max: 200mm
Width of profile max: 215mm on 90° welding.
|
|
| ... products without technical information |
| |
|
Corrugated Mesh and Steel Mesh are particularly suitable for guards, enclosures and partitioning in conjunction with Clamp Profiles.
|
|
High speeds, quick machining cycles, cooling water and chips: Machine tools represent a dangerous environment for people. This is why all machine tools are contained in nearly “impenetrable” housings.
These help reduce or eliminate the hazards for the persons who work with them. With the KABELSCHLEPP PROTECT-PANEL system, we offer you optimized protection for a particularly attractive price.
|
|
In industry, it is advisable to make safe production zones described as dangerous.
AE&T provides the protection of safety zones using robust latticed panels standard and adjusted then with the good dimension, by panels to measure.
Doors sliding hinges or protected by locking mechanisms or n-key rollovers associated with relays with safety supplement the unit.
AE&T offers a wide range of components of safety for these latticed guards:
- switches of safety to pins, levers or magnetic for the machines without inertia
- n-key rollovers with key or by electromagnet for the machines with inertia
- relay of safety category 2,3 or 4 for the monitoring of the emergency stops, the n-key rollover and locking mechanisms.
Latticed guards AE&T, equipped with components of safety are very easy to install and allow to delimit all types of danger zones in periphery of the machines presenting a body risk for the workers: cells of robotization, palletizers, machines of cutting or folding, conveyers...
|
|
| ... products without technical information |
| |
|
|
|
|
LINAK perfects movement in tracking systems
For solar panel tracking systems, LINAK offers several strong electric linear actuator solutions depending on your demand for force, stroke, length, and more.
For solar trackers LINAK has several solutions, but we have two main products, which we would like to recommend to you:
LA36 - Ideal Actuator for Solar Tracking systems
LA35 - Another Actuator for Solar Tracking systems
All suitable actuators for Solar Tracking systems
LA36 actuator
LA35 actuator
LA12 actuator
LA30 actuator
LA31 actuator
With LINAK you get
A specialist in electric linear actuator movement. More than 25 years of experience in the industry segment
Sales and service all over Europe, the Americas, Asia and Australia
A competent sparring partner, with great application and product know-how
A high degree of flexibility: small quantities, customised solutions
A broad product range for all demands
Non-corrosive housings and tubes
A long product life due to a robust construction
A low weight
Low current consumption solutions
Exact positioning
High IP rating 66 and 69K
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking
|
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors.
|
|
LAM1 linear actuator
Features :
24/12V DC motor
Maximum push load up to 600kg,
Pull load up to 400kg
Maximum stroke up to 500mm
Low noise, smooth speed
Built-in limit switchesifactory pre-setj
10% duty cycle (10 minutes)
Ambient temperature:-26C-+65C
Protective class: IP52
Accessories: potentiometers, hall sensor,
Over-heat protection
|
|
|
|
|
|
Compatible with the following réfs:
Optrex DMF-5001N
DOUBLE DIFFUSION EL512-256H3 HP1
DOUBLE DIFFUSION EL512-256H3 FRA
DOUBLE DIFFUSION EL640.400-C3 FRA
DOUBLE DIFFUSION EL8358MS
DOUBLE DIFFUSION EL320.240-36
DOUBLE DIFFUSION EL320.240-F6
DOUBLE DIFFUSION EL320.240-NA3
DOUBLE DIFFUSION EL512.256-H3 FRA
DOUBLE DIFFUSION EL640.400-CB1
DOUBLE DIFFUSION EL640.400-CD4
DOUBLE DIFFUSION EL640.400-C3
DOUBLE DIFFUSION EL640.480-AM1
DOUBLE DIFFUSION EL640.480-A4
DOUBLE DIFFUSION EL640.480-AD4
DOUBLE DIFFUSION EL640.480-AAA
Hosiden HLM8619
Hosiden HLD0912
Kyocera KCS057QV1AJ
SHARP LJ512U25
SHARP LJ512U25A
SHARP LJ512U27
SHARP LJ51AU27
SHARP LJ51AU27
SHARP LJ64EU34
SHARP LJ640U25
SHARP LJ640U32
SHARP LJ640U34
SHARP LJ64H034
SHARP LJ64ZU50
SHARP LJ640ZU52
SHARP LM057QC1T08
SHARP LM057QC1T01
SHARP LM32P073
SHARP LM32K101
SHARP LM5525-32NTK
SHARP LM6064
SHARP LM64C21P
SHARP LM64P30
SHARP LM64P83L
SHARP LM8V302
SHARP LQ084V1DG21
SHARP LQ104V1DG11
SHARP LQ104V1DG21
SHARP LQ10D011
SHARP LQ10DH11
SHARP LQ10D13K
SHARP LQ10D367
SHARP LQ10D368
LQ10D41
LQ10D421
LQ10S21
LQ121S1DG11
LQ121S1DG31
LQ121S1DG41
LQ64D341G
LQ9D011
LJ320U27
LJ320U28
LJ512U05
LJ640U21
LJ640U80
LJ640U31
LJ640U34
LJ640U35
LJ640U48
LJ64ZU51
LJ64H034
LJ64HB34
LJ64H052
LG Philips LB104V03
LG Philips LB121S02
LG Philips LM10V332
LG Philips LM10V335
LG Philips LM150X08
LG Philips LP064V1
LG Philips LP104V2
HITACHI LM-EK53-22NTK
HITACHI LM-CH53-22NTK
HITACHI LMG5278XUFC
HITACHI LMG7420PLFC-X
SANYO LMUTK12ASTR
TOSHIBA LTM084P363
TOSHIBA LTM09C016K
TOSHIBA LTM10C209H
TOSHIBA LTM10C210
DOUBLE DIFFUSION MD512.256-37C
NEC NL6448AC30-10
NEC NL6448AC33-18
NEC NL6448AC33-24
NEC NL6448BC26-01
NEC NL6448BC33-29
NEC NL6448BC33-59
NEC NL8060BC31-28D
FINLEX MD512256-39
FINLEX MD640350-61
FINLEX MD640400-52
FINLEX MD512256-36
FINLEX MD320256-71E
FUJITSU FPF8050FRUC-021
PANASONIC MD400F640PG1A
|
|
|
|
|
|
CTI Electronics Corporation manufactures a complete family of high reliability (NEMA 12, IP54 rated) industrial trackballs. These rugged input devices are recommended for aerospace, medical, and military and marine applications where precision, reliability and long-term performance are essential.
These industrial trackballs have been in service for over 2 decades without the need for repair, due to the high quality of the materials used. They feature formed Teflon® sealing rings in an aluminum collar for spill resistance, aerospace grade stainless-steel bearings (ABEC 7), dual-redundant photo-transistors and precision high-count encoders. CTI’s trackballs are made of maintenance-free, hardened, stainless steel shafts, and are available with or without buttons.
CTI's industrial trackballs are also available as desktop mouse pointers, trackball mouse pointers, and OEM industrial trackballs.
For more information, please visit www.ctielectronics.com or e-mail sales@ctielectronics.com
Teflon® is a registered trademark belonging to DuPont™
|
|
Our range of panel mounted trackballs are intended for OEM applications where engineers require trouble free installations over a wide range of specialised equipment. All major protocols can be supported and full environmental verification can be provided upon request.
To further aid the installation of trackballs into dedicated applications these panel-mounted trackballs are available mounted on ergonomically designed fascia plates with industrial switches in support.
Please enquire for non-standard colours and other requirements.
|
|
CTI introduces the H20U1-N5 Series Industrial Mouse™ pointing devices, featuring a single extra-large button. These rugged NEMA 4X (IP66) pointers are designed for use in harsh, wet, and limited-space panel mounted applications.
The low-profile N5 joystick knob is attached to a stainless steel bezel for simple under-panel installation, while a neoprene gasket is combined with a six-screw mounting pattern to provide near-waterproof sealing.
The H20U1-N5 has all the features of the Industrial Mouse™ family, and its extra large sealed button allows the operator to conveniently perform all mouse functions; even while wearing gloves. A choice from nine different joystick knobs allows for unlimited possibilities to suit your application’s unique needs. (Optionally available configured as a USB FlightStick, a.k.a. sidewinder joystick.)
For more information on this product and all of CTI's industrial products, please visit www.ctielectronics.com or e-mail sales@ctielectronics.com
|
|
300 mm universal combined machine
Following the success of the C26 genius and in response to market demands, MiniMax presents the C30 genius, a combined universal machine, with tables made completely of cast iron, and superior features. The 1200 mm long planer tables and the 200 mm improved thicknessing height allow more heavy-duty machining. Therefore, the C30 genius is set to repeat the commercial success of the C26 genius, backing it up, and completing its range, as a new small and economical universal combined machine. An ideal first purchase, it is practical and efficient and even with its compact footprint can still guarantee performances typical of a professional machine.
Main options:
• Aluminium mortiser
• Self-centering Wescott type chuck
• Squaring frame
• Wheels for machine movement
• Tenoning table and protection hood
• Spindle moulder protection for shaping operation
• "Tersa" cutterblock with 3 knives
• 3 single-phase motors 1,5kW 2Hp 50Hz (1,8kW 2,6Hp 60Hz)
|
|
|
|
|
|
Universal combined machine 410 mm
Elite Serie: the Combined Machines for the professional woodworker. Technology, design, innovation and quality: 100% made in Italy. The Universal Combined Machines of the “Elite” Serie represent the TecnoMax solution for the handcrafts who are looking for a compact machine without renouncing a top quality end product. The rapid machining changeover, the possibility to compose the machine according to the one’s requirement, and the same performance of the single-machining models are the main qualities which characterize this new range.
The new saw unit is made of a strong cast-iron structure. It is tightly fixed under the table and can be tilted by means of two side supports (trunnions): these solutions grant sturdiness, rigidity and a perfect cutting result. Furthermore, on request, the unit can be equipped with scoring unit for an optimal cutting even on upgraded panels. The sliding table is made from extruded anodised aluminium with a closed, honeycomb structure. The carriage runs on an exclusive slideway system consisting of guides made from calibrated and hardened F550SX steel. The spindle moulder unit is designed to provide the maximum stability and rigidity under all working conditions. Top performance features include: a large-size, cast-iron moulder spindle; a large distance (230 mm) between the two bearings on the moulder spindle; the possibility to mount tools at a minimum distance (5 mm) from the first bearing. The 4 standard speeds (3500, 6000, 8000, 10.000 rpm) are ideal for all types of machining operation, from moulding to routing against the grain.
|
|
| ... products without technical information |
| |
|
|
|
|
Flexible heating mat
Heating aluminium foils are used to warm and/or keep warmed small areas or industrial process parts ; cuttings out can be done to help perfect fitting to the part to heat ; optional adhesive backing can be added for easy and rapid fitting.
Applications :
. Industry : To warm surfaces and volumes (freeze industry, electronics, automotive, antennas, tables...).
. Household appliances : Heating elements for domestic equipments (refrigerators, freezers, plate-warmer, heating baskets...).
. Horticulture : plant-cutting, propagation, forcing.
Flexibility of 3A heating cables, cutting up and forming of aluminium allow elaboration of various forms of heating mats.
heat-glued wires on aluminium sheet :
Insulation : PVC
. Maximum maintenance temperature (power ON) : 65 °C
. Maximum exposure temperature (power OFF) : 105 °C
. Maximum load : 500 W /m2
. Supply voltage : up to 500 V
Options :
. Self-adhesive foil.
. Cold leads integrated without unnoticeable junctions.
heat-welded wires between 2 aluminium sheets :
Insulation : PVC
. Maximum maintenance temperature (power ON) : 65 °C
. Maximum exposure temperature (power OFF) : 105 °C
Insulation : TPE
. Maximum maintenance temperature (power ON) : 110 °C
. Maximum exposure temperature (power OFF) : 150 °C
. Supply voltage : up to 500 V
. Maximum load : 2000 W /m2
Options :
. Self-adhesive foil.
. Heat protector.
. Earthing.
|
|
Applications:
These can be fabricated for use in warming tables, cabinets heaters, cooling tables, heating plates for form carriers or even radiating heaters for household use.
|
|
| ... products without technical information |
| |
|
|