|
|
In the transmission shaft sector the increase of the production range, which took place in the last few years, allows an ample ex-stock delivery of the medium-light types.
The power increase of the heavy types, with flanges up to 1200 mm and maximum torque of 9000 kN, sets our company among the European leaders of this sector.
|
|
To assure you of prompt service, Curtis stocks
at all times 14 sizes of joints with solid and
bored hubs.
Standard alloy steel Curtis Turn-Key Joints
are also available from stock, and are ready for
installation with standard bores, keyways and
set screws already installed.
Curtis Alloy Steel Joints employ the use of
leaded alloys for all major component parts of
their joints. The use of leaded materials greatly
improves the machinability of these alloys.
Curtis Alloy Steel Joints feature 41L40-grade
steel for all forks. Forks of 7/8" diameter and
larger have induction-hardened bearing areas for
strength and durability. The body (hubs) of the
joints remain in an annealed state, which affords
free machinability. Center blocks and pins are
machined from 86L20 alloy steel. Center-blocks
and pins are carburized and case hardened to generate
superior wear characteristics yet remain ductile,
thereby enabling the joint to
handle shock loads without experiencing
premature failure.
For assistance in ordering your universal joints,
please refer to Curtis’ How to Order instructions
on page 19. To check the static torque rating,
dimensions, weight and other specific characteristics
of Standard Curtis Alloy Steel Joints, please
refer to the Selection Guides for single, double
and Turn-Key joints. |
|
Curtis double joints are available in 14 sizes,
and share all of the advantages of Curtis
single U-joints. Features include:
• Extra angularity allows standard units to
operate at angles up to 70°.
• Quick and easy TakeApart™ design for
easy and economical disassembly and
reassembly, with no special tooling required.
• Firm, positive lockup of the entire assembly
thanks to Curtis’ exclusive Tell-Tale Lock
Ring.
• Built-in lubrication passages with Curtis’
exclusive internal lubrication system.
• Lubrication covers (boots) available in
all sizes to retain lubrication and keep out
contaminants, extending the life of the joint.
Curtis Joints do not require grooves on hubs to
retain boots.
• Less galling and seizing because Curtis uses
dissimilar materials on all bearing surfaces.
• Maximum wear and strength from Curtis’
induction hardened forks.
• Easy machinability due to Curtis’ soft hubs.
• Smooth operations and longer life assured
by close and well-controlled tolerances
between mating parts and Curtis’ built-in
lubrication system.
• Perfect concentricity with hubs ground on
center and centering holes provided on solid
hubs to aid in machining. |
|
Many applications require corrosionresistant
universal joints to assure
sanitation or to avoid premature
oxidation or deterioration. Curtis stainless
steel U-joints are particularly important, for
example, to industries that use food processing
equipment, and for machinery that comes in
contact with corrosive chemicals or is exposed
to water for long periods. Furnace applications
also benefit from stainless steel, which better
withstands high temperatures and other
environmental extremes.
Curtis offers:
• 14 standard O.D. sizes
• 3/8" to 4" diameter
• 303 grade stainless steel in stock
• 304, 316 and other grades available by
special order
For assistance in ordering your universal
joints, please refer to the Curtis How to Order
instructions on page 19. To check the static
torque rating, weight and other characteristics
of Standard Curtis Stainless Steel joints, please
refer to the Selection Guide for single joints
on page 13. |
|
Manufacturers choose our TakeApart™
design for easy installation. But in some
cases, Curtis Joints don’t have to be disassembled
at all! We supply a complete line of standard
bored joints outfitted with standard keyways
and set screws already installed. Talk about ease
of matching connecting shafts! We call these
U-joints Turn-Key Joints because they truly are
complete and ready to go.
In alloy steel, we have all standard sizes
available in stock, ranging from 3/8" to 4" O.D.
with standard bores (one-half of the O.D.),
keyways and installed set screws. The 3/8" and
1/2" joints come with set screws only, while other
standard O.D. sizes include keyways. Joints 7/8"
or larger have Curtis’ simple TakeApart feature to
allow for more specialized modification.
Our large inventory allows O.E.M.'s and users
delivery on demand. |
|
| Huco's large range of universal joints. The joints shown here can be supplied in different configurations and joining options e.g. with quick release collars or as telescopic drive shafts. |
|
| Lovejoy has been manufacturing industrial universal joint for over 45 years. Our industrial joint product line is well established and provides you with a wide range of standard and specialized products. The Universal Joint is available in 13 sizes and 8 different types such as the D, HD, D303 Stainless, Needle Bearing, LOJ, JR-4, DD, DDX, Multi-Spindle and Universal Joint Boots. |
|
Types of universal joint :
- single,
- double,
- telescopic,
- with kneecap,
- with brace,
- with telescopic brace,
- of precision,
- with plain bearing.
Matters:
- Synthetic miniature material,
- steel,
- stainless steel,
- steel with needle bearing.
Protection'bellow for universal joint, hardness 45 shores.
Contact us or connect you on www.michaud-chailly.fr. |
|
Brand Name:
EBI
Country of Origin:
China (mainland)
" Key Specifications/Special Features:
Various U-Joints kits for different car models
Heavy duty & light duty available
Good life performance
Primary Competitive Advantages:
Price
Quality Approvals |
|
This Double Joint is used for the same application as series 0.400, namely in steering axles of all wheel drive vehicles. However, the design of series 0.500 differs slightly from that of series 0.400.
The joint pivots are not located in one plane thus enabling a more compact design. This feature shortens the distance between the centerpiece which results in a shorter installation length.
Series 0.500 offers more joint sizes than series 0.400 thus covering a wider torque range. |
|
In vehicle construction and mechanical engineering drive flanges form the connection between drive and cardan shaft.
Using modern machine equipment, we manufacture products on the basis of high-quality forgings according to customer drawings.
The drive flanges can be manufactured with internal and external splines as well as with hardened and lead-free ground seal bearing surface. |
|
| ... products without technical information |
| |
FANUC Robotics manufactures reliable and performing industrial robots for assembly applications, present in many industries: automotive (OEM and suppliers), metal, machine-tool, wood, electronics…
The FANUC robot range can answer all assembly needs with more than 50 different models, with a payload form 2 to 700kg and 4 to 6 axes.
All robots run with R-J3iC controller, which uses high-performance hardware and the latest control technology to enhance not only robot basic functions, but also many intelligent assembling functions such as:
• Control of up to 40 axes: up to 4 robots can be controlled by a single controller together with 4 additional axes groups. 2 or more robots can work together to perform assembling, screwing, glueing operations
• Integrated vision system to speed-up the installation of vision applications. This enables easy unmanned operation
• Wide range of fieldbus connections to communicate with a complete production line
• Easy backup and restore (PCMCIA, USB)
• Enhanced security and reliability
• Wide choice of software options |
|
MOTOMAN offers the widest range of robotic products with the number of controlled axes ranging from 4 to 13, including application dedicated robots for welding, palletising, handling, painting and clean room applications, with payloads ranging from 3 to 600 kg.
MOTOMAN installs turnkey systems and customised manufacturing solutions with the highest level of quality.
All manipulators/robots are fully electrical controlled by servo power.
The latest control system is capable of synchronised motion & control of up to four robots or 36 axes in total.
MOTOMAN also offers service, maintenance and training.
MOTOMAN, the robotic division of Yaskawa Electric Corporation, has its European headquarters in Kalmar, Sweden and Allershausen, Germany.
Interested in knowing more? Please contact us!
|
|
Mechanical Assembly:
Adept Cobra i600
Adept Cobra i800
Adept Cobra PLC600
Adept Cobra PLC800
Adept Cobra s350
Adept Cobra s350 CR/ESD
Adept Cobra s600
Adept Cobra s800
Adept Cobra s800 Inverted
Adept MotionBlox-10 Servo Kit
Adept Python Linear Modules
Adept Viper s1300
Adept Viper s1700
Adept Viper s650
Adept Viper s850
|
|
· From 12 up to 800 kg payload
· Reduced overall dimensions and wide working volume
· Rapidity and flexibility to optimize the cycle time
|
|
| As a robotics pioneer, the KUKA Robot Group is one of the leading suppliers of industrial robotics. KUKA today offers a uniquely wide range of industrial robots and robot systems, covering all common payload categories and robot types. This means that KUKA always offers you the robot that is exactly customized for your application and industry, for example six-axis robots of all sizes, palletizers, gantry robots, cleanroom robots, robots made of stainless steel, heat-resistant robots, SCARA robots or welding robots |
|
Provide high performance in all areas: this principle governs the development of Stäubli solutions, satisfying all requirements. Designed to work in the most hostile environments as well as cleanrooms, Stäubli robots demonstrate their efficacy under all conditions. Wherever speed, compactness, precision
and reliability are demanded, Stäubli has the matching response - whatever the industry sector or the type of application. |
|
|
|