|
|
Reel with automatic recall by spring. Seal turning double high quality, guaranteed constant passage.
Structure epoxy covered steel. Hydraulic pipe special reel. |
|
For mobile food: hoist, grab, overhead crane, machine & cart mobiles, lifting beam, control on the ground, conveyer, mast, mobile distribution.
Engine with magnetic coupling, high quality. |
|
| For mobile food: hoist, grab, overhead crane, machine & cart mobiles, lifting beam, control on the ground, conveyer, mobile distribution... |
|
ELYTRA develops and industrializes systems of power supply for used movable talents in the iron and steel, metallurgical, agro-alimentary industry, wastebaskets, ports, terminals, mines, theaters, etc.
ELYTRA designs and makes coilers from 1963 with a range of coilers manuals, to motorized means and with system of magnetic coupling. Within the manufacture range coilers for power supply, pneumatic, hydraulic are constructed and of data transmission through optical fiber. This range of manufacture goes from the smallest model with drum of 200mm of diameter, to the greatest drum with 7 ms of diameter.
The cables and hoses used for the manufacture of our coilers are specific for each one of the applications that they ask for to us, as much for high speeds, minimum radios of curvature and great tractions, with a reduced outer diameter.
For the transmission of energy of the fixed part to the moving body specific collectors for each type of transmission are used. A all this accompanied by the suitable accessories for each type of application, obtaining major and better durability of the equipment.
|
|
Horizontal decoiling reels
Hydraulic coiling and decoiling reels
One-sided vertical reels
Double-sided decoiling reels
Customised coiling and decoiling reels
Our coiling and decoiling reels covers a wide range of applications in the sheet metal proccesing. According to the needs and wishes we produce different reels. The maximum strip width is 2000 mm and the maximum strip thickness 7 mm. The loading capacity goes up to 25 t.
Base frames of decoilers are manufactured as rugged welded constructions. The internal and external diameters of the coils are aligned to norm. There are various possibilities of braking and drive modes.
The spreading is operated hydraulically by shuffled cotters. Decoilers with low capacities are partially operated by bell-crank lever systems.
Further accessory equipment, like:
- double decoiler,
- press rolls,
- conical drums,
- coil load cars, etc.
relievable the coil change, coil load and coil feed.
|
|
Reelcraft’s Series 30000 reels are designed for heavy duty applications requiring long lengths of hose and will adapt to plant or field use. Contemporary design and unitized construction assure trouble-free performance and long product life. Its reel frame, spool, and drum are fabricated of heavy gauge steel.The 30000 Series also features a nickel-plated swivel, vibration-proof self-locking fasteners ad Vitan “O” ring as standard. Adjustable spool rotation drag eliminates hose backlash when de-reeling and permanently lubricated dual main bearings allow for easy, maintenance free operation. There are motor mounts on either end of reel and the 30000 is easily converted from manual to power-driven.
|
|
| Coxreels' SS Series "Stainless Steel" hose reels available in hand crank and spring driven version, and is constructed of high quality electropolished stainless steel, an doffers clean, non-corrosive performance in applications that require it, such as food and chemical processing, marinas, and anywhere rust, corrosion and contamination thrive. |
|
The automated lines for sheet metal and rod manipulation, respecting the differences according to the load type and size being handled, consist of the following:
-Decoilers: The decoiler represents the first stage in the process and its mission is to coil / uncoil the reel of sheet metal or other material used and supply it to the press, either directly or by means of a feeder, a feeder-levelling machine.
The decoilers are programmed so they coil or unwind by means of the time control loop (connection and disconnection) and with clockwise or counter-clockwise rotation.
|
|
Completely automated machines for the automatic coiling and binding into rolls of flexible pipes made of plastic or of plastic-coated copper.
- The roll is completely compact, square-sided and allows
you to store it into piles.
- Compact design, minimum dimensions, solid welded
steel structure, all combine to enable this coiler to
be easily inserted in the production line.
- In particular, the working cycle can be adapted to
meet the plant's extrusion speed.
- The coilers enable you to programme all phases of
the working cycle with memorization of all parameters.
- High winding speeds and precise positioning of binders
(max. speed 120 m/min.).
- Various models to satisfy all winding and binding requirements. |
|
Single coil unwinder for any kind of cable, coil size Ø 295mm outside, 180-80mm inside; 80mm high
Highest performance of TRONÍC to unroll any kind of cable
thanks to its new singular shape even without holder by
simply laying it on any surface.
Extremely light , just 0.7 kg, free and easy to unroll. No
cable could become twisted inside the box at any speed.
Very serviceable and practical way to put the coil in
thanks to a simple pressure in the middle of the box
to remove the top cover and the easy solid rack
adjustable system to fasten the coil.
|
|
DIMECO offers a comprehensive range of uncoilers for coils from 50Kg to 25 tons, up to 2000mm wide.DIMECO uncoilers can afford 1,2 or even 4 coils. They are equipped with a pneumatic brake or driven.
Gifted with a particularly robust design, our machines are manufactured in mass production and can be fitted with a number of accessories, which improve stamping line productivity and enhance personnel safety (pressure arm, lateral guides...).
Our coil-car range from 1 to 25 tons makes coil handling easier.DIMECO uncoilers own dedicated features to process HLSA steels or delicate material (pre-coated, copper, mirror finished aluminium...)
The « PITSTOP » configuration allows automatic strip feeding and recoiling and offers an automatic line parameters adjustment when selecting a new job in the press terminal.
Our machines can uncoil from top or bottom, clockwise or anticlockwise and even without loop.
When combined with a DIMECO roll feeder, DIMECO uncoiler speed is automatically tuned to the press rate and to the feeder output. |
|
DLC 5000 Match Speed Splicer
Standard equipment & features:
Match speed splicer with split arms to load 2 full rolls
Core acceleration and braking by 4 quadrant AC motors
Control and regulation by PLC
Modem for remote diagnositics
Splice pattern straight-across, V or W
Black pasting tabs with photo cell detection
Simultaneous cut & paste under tension
Local push-button panel and WEBVIEW
Simple roll loading directly from floor
Arm automatic positioning
Auto load pre-position and auto chucks
Automatic roll alignment before splicing (aligns on operator side)
Normal and Symmetric arrangement for centre loading
MEGTEC motorized web-up device or provision for press system with web-up assist
Motorized cocking roller adjustment to assist running deformed rolls
Independent frames, no mechanical connection to the press
Fully assembled, pre-wired, pre-piped and tested for easy installation
Splice efficiency data counter
CE compliant
Versions at additional cost:
Remote control panel for sidelay, web tension and brakes
WEBCOM (WEBVIEW + interface for press communication i.e. Ethernet, Profibus, Serial Link)
Integrated DSA Infeed 180daN (for 67" (1700 mm) width) or 210daN (for 82" (2080 mm) width)
Automatic roll-load system/interface
Arm web feedback (splicer sidelay interfaced to web guide)
UL508A certification
6-roll web-over assembly (MEGTEC standard design)
QUALIROLL Paper Management System
Load bearing splicer (press supporting) |
|
| Suitable for versatile application with segment -, high performance - and CNC controlled spring coiling machines. The wire can be coiled off both vertically and horizontally, depending on the type of decoiler. |
|
The printed products from a web press could be delivered as forms or sheets, as folded in various sizes or could also be rewound into a new roll. This last-mentioned production form is often called continuous (non-stop) roll-to-roll production.
MEGTEC supplies automatic rewinders for the printing and converting industries. The product line is comprised of small machines with web widths in the range of 14 inches (350 mm) up to large rewinders made for widths well over 40 inches (1000 mm). Depending on the model, the web speed could be up to 2,450 fpm (750 m/min).
All rewinders are specially designed to produce high quality rolls in a variety of materials producing rolls that are consistently firm right from the core. The perfect rolls produced in a MEGTEC rewinder increase your company's productivity and profitability. |
|
The mechanical handling system on Model SBE 15.SF enables one operator alone to swiftly and saftely transfer coils from the stotage position onto the decoiler without having to use lifting equipment.
A drive is provided so that the strip is decoiled without being strained. |
|
Reeling drum for grounding, earth application
for Ex, Atex, Hazardous Zone with Earth Ex, Atex clip
Payout 5 to 30m
new version with pivot |
|
Dynamics and reliability, user friendliness, plant safety
and short set-up times are features of the decoilers made by ARKU. They accommodate coils weighting up to 30 tons. |
|
Application:
The MRH and MRM reels combine Minster's considerable knowledge and experience with thoughtful customer feedback and extensive market analysis. The result is a line of reels featuring carefully thought-out improvements and very competitive pricing that will increase your productivity and profits. The MRM reels are manually operated, offering a high-quality, low-cost alternative to our hydraulically-powered MRH reels for light duty applications.
|
|
Reel for earthing of tanker, mobile machine, cart, oil terminal, drum, station gasoline, gas oil station, tank etc
Delivered with pliers of earthing. |
|
reel of indication, stopping of zones, to delimit zones
access, zones at the risks etc
with 16m of ribbon of red and white indication width 50mm
with recall by spring and detent pawl |
|
The frame is fabricated from steel pipes.
- The ND models are fitted with an adjustable brake.
- Support by orientables roll bearings.
- The mandrel from steel by 3 inclined plane with expansion range from 470 to 550 mm and hydraulic cylinders which are activated by a electric pump.
- Brake with pneumatic clamp.
- Planetary gear-box + trasmission by double or triple chian. |
|
| ... products without technical information |
| |
|
|
