|
|
The DIALOG PLUS RACK series comprises the 700-1000-1500-2200-3000VA models and uses doubleconversion technology (VFI).
The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply.
The input and output EMI filters considerably increasethe immunity of the load to mains disturbances andsurges, even on bypass.
The UPS can power the load for long periods (usingbattery extension packs) or provide sufficient runtimeto allow shut-down of the protected computer systemsusing the PowerShield³ software, supplied as standard,for Windows 95, 98, 2000, Me, XP, 2003, Mac OSx, 9.x, Linux, NT 4.0, Novell operating systems.
For outstanding power protection and communicationDIALOG PLUS RACK is the best solution for sensitiveand "mission-critical" applications.
|
|
Available in 6 & 10 kVA single-phase output, suitable for 19-inch racks (3U), the Linear Plus RM provides all the advantages of modern double conversion technology.
The Linear Plus RM offers many of the standard performance features of the Linear Plus but in a 3U version, making it ideal for installation in 19-inch rack space.
It is available in both single-phase input and single-phase output configuration and provides the security of a truly redundant parallel system whilst offering the highest degree of reliability for mission critical loads and applications.
|
|
|
|
|
|
Digital Energy™ Match
CE / UL LISTED
The Digital Energy™ Match 19" UPS provides cost-effective and near-perfect power protection for a wide range of 19" rack-mount applications. The units are equipped with RS232 and SNMP interfacing possibilities, allowing them to use the free GEDE software for all well-known operating systems. They are specially designed for typical rack-mount demands, like long backup times, high ambient temperatures, and high over-voltage protection. The attractive design allows front access for battery replacement.
As the batteries are front accessible, they can be replaced in an instant without removing the unit from the rack.
The Match 19" UPS is a microprocessor-controlled, line-interactive UPS. The high efficiency of this UPS leads to significant power savings over the lifetime of the product.
When sourcing a 19" rack-mount UPS from GE, you also get access to valuable services such as solution design, integration within networking environments, customization, maintenance, and training.
|
|
Liebert PSI - 60/50Hz: High-Level UPS performance and reliability for servers and network power protection in 1,000-3,000VA.
Liebert GXT 500VA to 10 kVA - 60/50Hz: True on-line UPS for networks, clustered equipment, and other critical applications. Protects against all power threats. Generator compatible. Internal SNMP capable.
|
|
|
|
|
|
Conceptpower DPA
Newave’s newest modular UPS design Conceptpower DPATM (Decentralized Parallel Architecture) with unique SAFE-SWAP-MODULES (SSM) addresses all the availability concerns related to power protection of mission critical applications. The move to high power density blade servers has caused a shift in the performance of advanced power protection systems. High power density, high efficiency and no power derating with leading loads have become the key features of modern UPS Systems.
Individual UPS modules with three-phase output powers from 10 to 50kVA (8 to 40kW) are plugged into an easily installed cabinet which contains all of the system's input and output distribution components. UPS modules are Safe-Swappable and can be quickly and safely added to the system without risk to the critical load for either N+n parallel redundancy or an increase in system capacity. Safe-swappable modules also facilitate rapid repair times, ensuring system reliability and availability are optimised in all circumstances.
Highlights at a glance
- High power density (200kW per rack); For floor space saving;
- DPA with Safe-Swap Modules (SSM); For premium power protection availability;
- Low Total Cost of Ownership (TCO); Cost saving during entire life-cycle;
- Flexibility / Scalability; Ease of power upgrade, pay as you grow;
- Enhanced Serviceability; Rapid fault recovery;
- Link to Newavewatch; Instantaneous fault recognition.
|
|
|
|
|
|
Digital Energy™ IT Series UL Listed UPS 600VA - 2kVA
Pure Sinewave Output, Line Interactive Tower and Rack Mounted UPS
The GE Digital Energy™ IT Series Rackmount and Tower UPS provide cost-effective, high quality power protection for a wide range of 19" Rackmount and Tower mount applications. The IT Series is a line interactive UPS that has pure sine wave output, which prevents downtime and equipment damage due to power outages, voltage fluctuations and transient surges. All GE Digital Energy™ IT Series UPS's are microprocessor-controlled and equipped with AVR (Automatic Voltage Regulation), making them ideal for server, data storage, networking, telecommunications, and point-of-sale applications.
The units are equipped with RS-232, USB and additional communications slots for add-on accessory communications cards. GE offers a wide variety of SNMP and communication cards to enhance the communication capabilities of the IT Series.
All IT Series UPS's utilize the GE IT Series MONITORing management and monitoring software. The IT Series MONITORing management and monitoring software has the capability to interface with all of today's software operating system platforms. The front panel, multifunction audible alarms and set of six (6) LED's allow for quick visual notification of UPS and battery status.
All IT Series UPS's have hot swappable, user-replaceable batteries. The attractive design of the IT Series allows for front access, facilitating battery replacement. All GE IT Series UPS units come in an attractive, black color scheme and carry a (2) two-year product warranty.
|
|
|
|
|
|
The highest precision for sensitive loads.
Designed to provide the highest precision thanks to its advanced double conversion technology, Active is the ideal solution for those sensitive loads which require a high level of regulation and for those electrical environments where the AC quality is poor. Also available in rack version, Active is a perfect investment to help deliver reliability and robustness to your loads.
Active, available in tower and rack versions from 700 - 3000 VA, features advanced double conversion technology for a maximum protection of your sensitive loads.
External battery packs for extended autonomies are an option, facilitating a modular approach to power management, allowing us to tailor your UPS solution as your loads requirements change.
Its tight output voltage regulation (+/-3%) and wide input voltage (160-276 V) make Active the right choice for sensitive loads and poor AC mains environments.
Active includes a comprehensive and user-friendly front panel which provides the user with information about the UPS status (faults, mode of operation) and parameters (load level, battery level) at a glance.
MopUPS Professional software is bundled with the unit, in addition to other connectivity elements (SNMP slot, RS232 and USB ports, volt-free contacts and RPO optionally, etc). Moreover, together with ManageUPS CIO software, Active is a perfect solution for distributed systems and remote locations.
|
|
GE's Digital EnergyTM GT Series UL UPS series provides high quality power protection in a cost effective package. The GT Series UL is a compact, true VFI (Voltage and Frequency Independent) on-line double conversion high performance device.
The UPS is designed to support and protect mission-critical applications and provide the user with high reliability power regardless of the mains power quality condition. All GT Series UL UPS are microprocessor controlled and equipped with RS232 communication and optional SNMP interfacing capabilities for all major operating systems. Extended run times are available with the optional battery pack.
|
|
The Powerware 5115 Rackmount UPS is a high-density power quality and backup power protection solution ideal for servers, storage systems, network equipment and other critical devices. Delivering basic surge protection and backup power, the Powerware 5115 Rackmount UPS additionally offers the best UPS power protection against five of the nine common power quality problems.
The slim design and wide range of UPS system installation possibilities make the Powerware 5115 Rackmount UPS the most versatile UPS power quality solution available.
|
|
Only 1U thickness (4.4cm)
The ELITE2005RM is an inverter which does not exceed 1U thickness. Very small it is very easily integrated in a bay 19 '' of small size.
Toric Tranformator
The ELITE2005RM is equipped with a toric transformer the purpose of which is to limit the electromagnetic radiation and to increase the output of the inverter.
Voltage regulator
In order to avoid inopportune commutations in battery mode, the ELITE2005RM is equipped with a very powerful voltage regulator. This regulator makes it possible the responsibility of be fed with a tension always very near to the face value.
Protection network RJ45
2 catches RJ45 are at your disposal to protect your chart network or your Modem chart against the storms and the electric shocks.
Intelligent communication
For an optimum safety, L '' ELITE2005RM is sold with a software of supervision and automatic fence of files to be installed on a PC or a waiter.
|
|
Inverter rackable, modular of 0,4KVA with 6KVA.
- Evolutionary in autonomy
- Redundant N+1
- Has fault tolerance (Hot swap)
- Available in ONE LINE and IN LINE
|
|
| ... products without technical information |
| |
... see all the products in the category
UPSs
|
Flip Mirror Holder KSH 90
The swing leaf bears a wobble plate with an adjustment range of ± 0.5° and an aperture of 2". Optics with a thickness > 12 mm (normally 2" mirrors) are fixed with a plastic screw.
Optical components (such as mirrors and beam splitting paltes) having a thickness of only 10 mm can be pressed aganst three stops with the enclosed two clamping shoes and thus fixed.
The swing angle is 45°, the repeatability < 100 µrad. The swing time of the motorized version is about 1 s.
- for use with SYS 90
- black anodized aluminium alloy
- mountable onto pin or slide
- manual operation or motorized
|
|
|
This kinematic mount is designed for ultrathin nonlinear crystal positioning. The mount accepts ring holders of Ø25.4 mm and thickness up to 10.5 mm. The housing is stopped by a rest-flange inside the central aperture of the platform, and is secured by a threaded retaining ring.
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
|
ROLYN Mirror Mounts are designed to give the very best combination of economy and performance. There is no glass-to-glass contact. Clear aperture obscuration caused by the plastic mirror holders is minimal. These three holders form an adjustable rigid orthogonal kinematic mount for the mirror which resists vibration and handling. Black anodizing minimizes reflections. Mirrors are not supplied with the mount.
|
|
As you scan through our various mounts we have a selection of Single Circular Filter Wheel Mounts, a Universal Stand Mount, Compensated Circular Filter Mounts & a 8 Position Filter Mount.
* Compensated Linear Filter Mounts
* Degree Scales
* Mounts
* Storage Boxes
|
|
|
The Universal Mirror Mount/Platform 840-0052 is suited for precise adjustment of standard mirrors which can be directly bound to it. The mount may be used in horizontal position as a tilt table. Then it can be used to align opto-mechanics around two axes. For such mounting the mount has an M4 hole on its back
|
|
The Laser Mech Lens Mounting System solves the problem of lens removal for replacement and inspection. By using a simple cartridge mounted lens inserted into a side slot in a permanently positioned manifold block, the problems of the traditional threaded, axially inserted lenses are avoided. This innovative mounting method allows removal and replacement of the lens in seconds with no readjustment of the optical alignment and without the removal, replacement or disassembly of any other part of the optical system.
Each assembly consists of a lens mount manifold block with very fine, adjustable lens centering screws and a spring-loaded, lens holder assembly to hold the lens. The lens holder contains all the seals necessary to pressurize the space beneath the lens for use with the Gas Jet Manifold.
|
|
Lens holders are designed to position miniature lenses over CCD/CMOS imagers with high degree of accuracy. Lens holder must keep the lens optic axis centered on the active area of the imager. It must also keep the lens axis perpendicular to the imager surface. Some lens holders also provide special features for holding IR cut-off filters and optical low-pass filters. Lens holders are precision-molded with special plastic materials.
|
|
Adjustable Polarizer Holders
Dimensions most compact among 1" optics mounts
Both tilt and tip are controlled from aside the optical path
Ideal for dense optical schemes
Fine adjustment screws with 0.25mm pitch
Hardened inserts under adjusters
Original stabilized L-shaped flat spring
Accepts optics upto 10.5 mm thick
Tilt/tip travel range ±2.5°
Roller bearings
Lockable. Continuous 360° rotation
Horizontal and Vertical mounting
Mounting holes M4 on three sides
|
|
|
|
|
|
ECO-1 stand is the ideal support for all types of barriers of the SB series and for MDG0001 mirrors. It is practical and economical and is anchored to the floor by means of two 10 mm diameter metal anchors (not included). The base is composed of a 15 mm thick burnished iron plate, with holes for the anchors. Each post comes with 4 sliding inserts already positioned in the side splines of the burnished element. The brackets supplied with the fences or mirrors shall be fixed to such inserts. If one of the other splines is to be used (the extruded element comes with one spline per side), simply remove the plastic cover from the post, recover the inserts and insert them where desired.
If the application is particularly demanding from the viewpoint of mechanical stress, an 'L' reinforcement bracket (code: ECO-L) can be fixed between the post and the base. Normal application do not require the reinforcement bracket since the aluminium extruded structure is anchored to the iron base by means of a large screw, which goes approximately 100 mm inside the extruded element and the head of which is hosted inside the base plate.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
