|
|
|
Integrate a Donaldson Torit Rotary Valve into your collector to create a complete system that automatically and continuously transfers dust from the hopper to the conveying system or collection container. Rotary valves are designed with a precision seal that keeps air out of the hopper and safeguards the performance of the collector. Donaldson Torit Rotary Valves are available in either AN, CI or F-Series
|
|
Tubes and bends in pneumatic conveying lines are suffering more or less abrasion. Gericke elbow type GB resists abrasion and avoids product attrition.
It reduces considerabley degradation of conveyed material and avoids formation of angel hair through its patented deflection chamber.
The compact design reduces cost of pipe support and installation. It is automatically self-purging. Little pressure drop.Free trial units available.
|
|
Transportation fan, directfloated, circulating or being certain cover disk.
Sizes:
VRT 400 - VRT 1,250 (D mm)
Employment:
To the promotion of dust, soot, splinter and fiber parts, to 90°C
Technical data:
V = to 15 m ³ /s
Delta pt = to 6,000 Pa
P = to 75kW
Optionally with Keilriemenantrieb
|
|
|
|
|
|
FD range, air conveying blower
-Blower housings made of abrasion resistant cast iron
-hinged housing cover lid for inspection and cleaning
-welded sheet steel impellers with radial blades
-Maintenance-free squirrel cage rotor motors to IP54
The units can only be supplied in the housing position pictured.
Accessories: Various connectors for both inlet and outlet side.
RD F range
The RD F range can be used for conveying of light and non-abrasive bulk.
The blower parts are made of aluminium cast, the impellers are made of welded sheet steel. The solid construction of the practically maintenance
free medium pressure blowers is the basis for a long lasting service life and low operation cost. Inspection and cleaning may only be carried out at these blowers by unscrewing the housing cover plate. All drive motors are made to IP 54 enclosure, class F thermal insulation and comply with EN 60034-1 (VDE 530 Part 1). The motor power is oversized in order to have sufficient reserve for the conveying.
|
|
|
Compression coupling for pneumatic conveying system in gavlanized steel or in stainless steel available in 38.1 mm to 324 mm.
|
|
High Effi ciency (HE) for Powders & Fine Materials
- 3 Piece Construction for Easy Cleaning
- Stainless Steel - Carbon Steel - Aluminum
- From 200 CFM to 8000 CFM
- Standard sizes available from 12” to 90”
- Stream Lined Scroll Inlet/Outlet Minimizes Wear
- Less Turbulence, Less Resistance
|
|
Fills hoppers via cyclonic separation in the inlet load tube and
exhausting air in the outlet tube.
Valves can be stacked on top of each other allowing multiple sources to multiple hoppers.
Standard Features
- Stainless steel material contact points.
- Lightweight aluminum frame, corrosion resistant.
- Positive blade lock (PBL) between blade and cylinder rod.
- Active compression seals (ACS).
- Internal magnetic piston cushioned air cylinder.
- Stacking design for multiple conveying lines.
- Rated for 82oC (180oF).
|
|
|
|
|
|
For Connecting Pneumatic Conveying Tube & Pipe
- Easy to install - All sizes stocked
- Galvanized or stainless steel shells available
- Precision cut inner sleeves and gaskets
- Thick 1/8" black neoprene gaskets standard
- White, silicone & Viton® gaskets available
- Thick stiffener bars provide added strength
- Copper anti-static strips included
- Grade 5 full thread bolts won't strip or break
- Requires only 3/4" tools to install
- Replacement gaskets available
- Gasket protectors available upon request
- Lengths - 2 bolt 4", 3 bolt 6", 4 bolt 8", 5 bolt 10"
Neoprene - Our standard black gasket for Lorenz Couplings is perfect for most dry bulk conveying applications. Resists rotting, checking and cracking from exposure to ozone.
Temperature range (-40° to +200° F) (-40° to 100° C).
White Nitrile - Excellent gasket for all types of conveying applications. Especially in the food industry. A high quality FDA approved compound ( -40° to 100° C).
Silicone - For use in higher temperature applications. Silicone is odourless, tasteless, non-toxic and noncorrosive. Available for all Lorenz products (-60° to 450° F) ( -50° to 230° C).
Viton® - Please consult factory for specific details regarding this product.
|
|
|
GF PRIMUS metal separation systems remove magnetic and non-magnetic metal particles (steel, stainless steel, aluminium etc) from pneumatically conveyed bulk materials such as granulates and reground material. Metal contaminants (and inclusions) are removed by means of a reject flap (‘Quick Flap System’) without any interruption to the material flow, even at high flow rates.. Contaminated material is rejected into a container. The reject container is emptied automatically. The GF PRIMUS metal separation system is primarily used in industries where hygiene standards are less important. It is used for inspecting dry bulk materials.
|
|
Double Flange
ANSI B16.10
* Gate valve replacement
* 3" - 30"
* ANSI 150 - 600
* Data sheet (PDF)
|
|
Buttweld S1
* No flange tightness problems
* DN80 - 1500
* PN10 - 100
* 3" - 60"
* ANSI 150 - 600
|
|
Lugged Type
API 609 T2
DIN EN 558-16
* Compact design
* DN50 - 1000
* PN10 - 100
* 2" - 40"
* ANSI 150 - 900
* Data sheet (PDF)
|
|
Double Flange
ISO 5752/F16
* World-Wide standard
* DN50 - 1800
* PN10 - 100
* 2" - 72"
* ANSI 150 - 900
|
|
Double Flange
DIN EN 558/F4
* Simple mounting
for large Diameter
* DN80 - 1600
* PN10 - 100
* 3" - 64"
|
|
* Heavy duty construction
*Large inlet and outlet in relation to the rotor volume
* Outboard bearings
* Packing gland type seals
* Versions in accordance with ATEX 94/9/EC
Application: Discharge airlock valves for dust collector filters and cyclones.
Designed for a wide range of products, systems and operating conditions, they are also used as discharger and metering valves below silos and hoppers.
|
|
|
|
|
|
Air Conveyors - Ring-Vac™ Pneumatic Conveying System:
Available in standard and threaded versions for regular and high temperature applications.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System has virtually no moving parts, convey's air at high rates and long distances. Utilizing compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System is available in both coated aluminum or high temperature stainless steel. Simply clamp a standard hose size to each end of the Ring-Vac™ to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System is available in 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm) sizes. Any size beyond that can be prohibitive for most applications due to high compressed air requirements.
In addition, beyond 3", the vacuum ability begins to drop significantly except for highly intermittent applications. For applications beyond 3", a blower system often becomes far more economical except in a rare number of possible applications. However, larger size versions are available if required as well as special sizes.
Coated aluminum and high temperature stainless steel Ring-Vac™ Air Conveyor can convey all types of solids in large volumes over great distances with no moving parts.
- Made of an coated aluminum body with no moving parts. High temperature stainless steel models are available for high temperature and corrosive applications.
- Standard sizes to fit standard hose diameter for easy clamping. Threaded versions connect easily to regular pipe thread: 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm). Special sizes can be manufactured if required.
- Utilizing a pressure regulator will control the flow material.
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Longer life in difficult environments than competitive models.
- Ease of use.
- Simple and easy control of material flow.
- Maintenance free operation.
|
|
Features:
- Compact and easy to install
- 100% self cleaning
- Fits all flange and pipe connections
- Available in cast iron, stainless and aluminum
- Reduces noise level
- Minimized pressure drop
Applications:
- For all high and low density dilute phase systems
- For plastic pellets, other granules and abrasive products
- For retrofitting existing systems
- For replacement of long and short radius elbows - and other pipe bends
|
|
ICEsonic S-series Air Amplifier.
For an efficient hi-flo operation.
Compact design and no maintenance required.
Products such as ground spices and flour or wastes from textile and paper, fumes and dust can all be conveyed over considerable distance.
Available: Anodised Aluminium and Stainless Steel, from 5 to 50 mm.
|
|
|
|
|
|
Raccordi di giunzione (couplings) per trasporti pneumatici, a gravità o in aspirazione.
raccordo serie "IL" per trasporti sino a 2 bar con guaina esterna in acciaio INOX 304 e bloccaggio viti in Nylon 6, fascia intermedia in acciaio INOX 304 e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SL" per trasporti sono a 6 bar con guaina esterna zincata e bloccaggio viti con piatto zincato 30 x 4 mm, fascia intermedia zincata e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SP zincata" per trasporti sono a 6 bar con guaina esterna zincata e bloccaggio viti con piatto zincato 30 x 8 mm, fascia intermedia zincata e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
raccordo serie "SP INOX 304" per trasporti sono a 6 bar con guaina esterna in acciaio INOX 304 e bloccaggio viti con piatto zincato 30 x 8 mm, fascia intermedia in acciaio INOX 304 e guarnizione in gomma bianca o nera con fascetta INOX di continuità elettrica.
|
|
Cyclone seperators, type ZAS, are used for the separation of pellets and powders from the conveying gas downstream pneumatic conveying systems. The cyclone separators ZAS are designed to achieve a maximum separation efficiency.
Design Features
- welded construction made of aluminium or stainless steel
- design with vortex chamber including deflection cone in the discharge area
- support on brackets or on skirt (special)
- venting of the clean gas to atmosphere or via a flange connection into a closed aspiration system
- individual design to match different flange connections
- maintenance-free due to missing wear parts and drive
- standard cyclones designed for overpressures up to 100 mbar (g)
- individually designed to meet customers` special requirement
|
|
90° Diverter
Series 229 & 237
Compact, Abrasion Resistant
The Dynamic Air 90° Diverter is a reliable, low cost, compact and simple design of heavy duty construction. A positive rubber-to-rubber seal is created by the internal flapper which presses against the unused port. The seal improves as the conveying pressure increases, ensuring better performance against leakage in even the most severe dry bulk solids applications.
Features
Abrasion resistant
Positive sealing to 100 PSIG
Full port design
Economical
Compact, low profile
Low maintenance
Position sensors standard
|
|
Features:
- Seal rings at each port
- Full round port pass way design
- Heavy duty body design for pressure surges up to 90psi (6.0bar)
- Manual or pneumatic operated
- Heavy duty pneumatic actuator with integrated mechanical stops
Application:
- Suitable for granular and pellets
- For distributing or merging of product flow
- For differential pressure up to 60psi ( 4.0 bar)
|
|
|
|
|
|
The V-Diverter valve is used especially for diverting the bulk material flow in pneumatic dense- and dilutephase conveying systems.
The patented design of the plug enables application in any conveying direction.
Design characteristics
- suitable for pneumatic dense- and dilute-phase conveying systems
- smooth and gap-free transition due to patented design of inlet and outlet
- single channel design avoids plugging
- high dust and pressure tightness due to sealing pressing against the housing
- pressure tight from -1.0 to +6.0 bar (g) gauge to the outside and the non activated leg
- high reliability based on maintenance-free actuator
- solid temperature range from -20 to +120°C and ambient temperature range -20 to +40°C for standard design
- no additional safety device necessary as there are no moving parts outside the valve
- easy installation in all orientations because of integrated cast flanges and supports
- easy subsequent change of complete drive from left to right side of diverter valve
- easily visible direction indicator of plug orientation
- direct control of plug orientation by proximity switches
- all bolts in stainless steel
- low total weight
- defection angle 45°
|
|
Bulk flow has to be distributed an collected. For that diverter valves with the highest demand on functionality and operational safety are used. For product pureness deposit-free and CIP capable diverter valves are indispensable.
Their maintenance-free operation is a deciding factor for the profitability of the plant. Diverter valves from Coperion Waeschle fulfil these numerous requirements even at high pressure and temperature ranges.
|
|
|
Twin-Outlet Diverting Rotary Valve combines the function of a rotary feeder/airlock and diverter valve in one simple mechanism. Select left or right discharge by changing rotor direction via motor and reversing switch. Only one moving part. Very compact. Exclusive tapered rotor allows rotor gap to be easily adjusted. Heavy cast aluminum, iron or stainless steel valve body. Adjustable packing gland shaft seals -- purge available. Heavy duty permanently sealed outboard roller bearings. Ideal for vacuum or pressure conveying systems. Available in five sizes with capacities up to 2,500 cubic feet per hour.
|
|
Airlock
- High filling efficiency
- Sheared angle inlet
- Minimum air leakage
- Explosion proof models available up to 10 bar g
- Customised solutions
- Bored flanges in accordance with PN 10, ANSI 150 lbs and JIS
|
|
Pipes and components made of steel, longitudinally welded. Diameter from 60 up to 800 mm.
Material: mild steel, primed or galvanized and stainless steel (st/st). Wall-thickness from 1 up to 3 mm.
Pressed segments with small radius for bulk good handling and pressed bends (with good flow characteristics) with a radius twice as large as diameter (up to 400 mm) for exhaust air/dust extraction plants.
|
|
Description:
The CO.RA. SANITARY ROTARY VALVE is characterized by a double rotor. The big rotor is used to transfer large quantities of product while the smaller rotor is used to obtain the pre-regulated quantity of product required. The SANITARY ROTARY VALVE is easy to disassemble and clean.
|
|
|
|
|
|
The M-Diverter valve is used especially as a distributor of bulk materials.
The geometric design of the plug enables application in any conveying direction diverting or merging of the material flow from four lines to one or reversible.
Design characteristics
- suitable for pneumatic dense- and dilute-phase conveying systems
- smooth and gap-free transition due to patented design of inlet and outlet
- single channel design avoids plugging
- high dust and pressure tightness due to sealing pressing against the housing
- pressure tight from -1.0 to +6.0 bar (g) gauge to the outside and the non activated leg
- high reliability based on maintenance-free actuator solid temperature range from -20 to +120°C and ambient temperature range -20 to +40°C for standard design
- no additional safety device necessary as there are no moving parts outside the valve
- easy installation in all orientations because of integrated cast flanges and supports
- flanges easy accessible; no special connections required
- easily visible direction indicator of plug orientation
- direct control of plug orientation by proximity switches
- all bolts in stainless steel
- low total weight
- standard design with electrical connections in IP 65
- defection angle 4 x 45°
|
|
|
|
