|
|
Features
* Voltage range from 180V to 240V for single phase
* Voltage range from 300V to 440V for three phase
* Class of insulation ‘B’ Models are with IP-44 protection
Applications
* Drying
* Evaporation
* Distillation
* Evacuation of air from suction pipes and chambers
* Filtration
* Sterilisation
* Condensation
* Priming of large pumps
* Twist drilling machine
* Bottle filling
Range
* Vacuum up to 650 mm of Mercury
* Air flow rate up to 55 m3 /hr
* Power rating 0.75 kW to 2.2 kW (1 hp to 2 hp)
|
|
Features
- 1x10-3 Torr vacuum level
- Economical roughing source
- No moving parts
- Vibration free operation
- Heat regeneration
- Positive pressure safety vent
- Multiple pump capability
- Clean and noncontaminating operation
|
|
COAX® ensures excellent performance at both low and high feed pressures - ideal for situations where compressed air lines deliver air at low or fluctuating pressures.
Pumps based on the COAX® technology can operate within the range of 0.17 to 0.60 MPa.
|
|
The HiPace MC Innovation
Magnetically Levitated Turbopumps with Integrated Drive Electronics.
HiPace MC is a line of magnetically levitated turbopumps with integrated drive electronics that operate at the maximum performance level. This not only applies with respect to their especially high pumping speeds, high compression and high gas throughput. Their magnetically levitated bearings, which assure extremely low vibration and maintenance-free operation, are the embodiment of top class technology.
|
|
oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
Oil-lubricated rotary-vane vacuum pumps achieve a very high end-vacuum at a minimum noise level.
|
|
* Patented COAX® technology.
* Available with a three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow, a Pi cartridge for high performance at low feed pressure or an Xi cartridge when high flow and deep vacuum is needed.
* Substantially lower air consumption as compared to conventional ejectors.
* Modular design.
* Available with multiple connection alternatives.
* Low noise level.
* Short evacuation time.
Supplied with a vacuum gauge.
|
|
Positive Displacement Vacuum Pumps
Vacuum pump packages are recommended for the higher rates over longer distances and continuous service. They are also used on many applications where a venturi unit would be adequate but sufficient compressed air is not available. They feature a positive displacement lobe-type blower and are complete packages with motor and blower, secondary material filter on the inlet and muffler on the outlet. These units are mounted on a heavy duty, forkliftable base and are equipped with belt guards conforming to current OSHA standards. Included are a glycerin-filled vacuum gauge and a vacuum relief valve. The secondary filter protects the pump from any carryover of material from the material receiver. Cartridges are easily changed by removing the end cover. Optional differential pressure gauge and/or switch can be furnished to indicate or shut down if filter should become restricted.
|
|
|
|
|
|
With a wide range of granule receivers ranging from 1,5 to 140 dm3, Piovan is able to offer the ideal solution for all conveying requirements. Three versions of vacuum receivers are available: granule receiver entirely in stainless steel (C models), version with 3 sight glasses (SR models) and in the configuration with glass section (GR units).
Maintenance:
> Effective and rapid cleaning operations
> wide filtering surface and solid steel frame, to guarantee continuous functioning of the system with no production stop for maintenance operations or replacement of the filter
> anti-wearing materials
Design: magnetic sensor integrated in the control box and factory pre-set. A led allows the operator to monitor when the sensor is activated.
Simplified and rapid installation: The possibility to adjust at 360° the adoptor ring as well as the material and vacuum lines, not constrained one another, simplifies the installation of the receiver in line with the plant configuration.
SIMPLIFIED AND ENHANCED OPERATOR INTERFACE: Easy3System
Plug&Play: The receivers are immediately ready for operation once connected, with factory pre-set loading cycles for optimal functioning. The working status and possible alarms are signalled in a user-friendly way with bright green and yellow leds positioned on the upper part of the control box, in a visible position.
The KEYPAD permits to customise the hopper loader’s functioning, setting the conveying times, the pause time between the loading cycles, the maximum number fo unsuccessful loading cycles, the modes of filter cleaning, and the functioning of the proportional valve.
Easy3System is compatible with the previous versions.
|
|
|
|
|
|
FEEDMAX B and BS/4 Series Loaders
The FEEDMAX B and BS/4 series loaders are built for highest functionality and demanding applications. The modular design of these vacuum loaders guarantees specific adjustment to meet individual customer requirements, as well as for simple cleaning.
- Complete flexibility – Stainless steel line size reducers can be easily interchanged to maximize flexibility.
- Superior wear resistance – Pneumatically actuated cast stainless steel material and vacuum valves for highly abrasive feeding applications.
- Low Maintenance – Interchangeable mirror finish stainless steel center section offers low maintenance and allows hopper capacity to be easily changed.
- Completely dustproof – Pneumatic discharge shut-off valve design permits clean
room operation for standard loaders.
- Highest operational reliability – Dustproof and pneumatically controlled material shut-off discharge valve.
- Ergonomic design – A hinged lid without valves or hose connections offers unmatched accessibility
for simple cleaning.
- Simple cleaning – One self-locking toggle latch is easily accessible and opens towards the operator.
- Easy operation – Modular assemblies with fully accessible quick release band clamps can be easily cleaned and interchanged.
- Easily visible – Status LED`s and pluggable control cable for all network control systems.
- Reliable – Material demand via proximity sensor standard with high heat execution.
|
|
|
Engineered Dry Screw vacuum systems incorporate Kinney Dry Screw vacuum pumps into complete vacuum systems with vacuum boosters, custom controls and accessories to combine high pumping speed with deep vacuum levels. Flows range to 10000 CFM (17000 m³/h) with vacuum levels to 10 microns and below.
|
|
The Kavac series of vacuum products includes a wide variety of conventional vacuum components, as well as more specialised items such as variable vacuum pumps, material transfer and air amplification units. KV's vacuum division is also able to deliver customer-specific vacuum solutions; often developing customised pumps or completely integrated vacuum control systems. A comprehensive range of vacuum cups complements the Kavac range.
|
|
* Large vacuum flows
* Short evacuation time
* Good for handling porous materials or if leakage is present
* Energy-Saving (ES) available
* Available with connection plate in aluminium (AD) and composite PPS (D).
|
|
|
The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application.
|
|
The D-LAB membrane pumps with their chemically resistant Teflon heads, diaphragms and Kalrez valves offer the chemical or pharmaceutical laboratory user a wide range of choice, either used as stand-alone pumps or as part of a sophisticated system.
The one head, 100 mbar ultimate vacuum pumps are suitable for use with drying equipment or for replacing water-jet pumps, whilst the two head, 8 mbar ultimate vacuum pumps are suitable for rotary evaporation, gas transfer and a wide range of medium vacuum applications.
The pumps are designed so that they can be upgraded by the addition of a range of accessories. The accessories are supplied with all the required connections and no special tools are needed to fit them.
|
|
|
|
|
|
Introduction
The 2XZ series vacuum pump is two levels of straight associations-like structures, its operating performance is composed by thehigh-pressured level and the low pressure stage two parts, itsentrance and vacuum equipment connection, when revolution the gasmassive inspiration with discharges the vessel in, when the equipmentobtains the vacuum, the high-pressured exhaust will cut down the seal,the high-pressured level inspiration gas passes along the secondlevel, and will become after the second level of inspirationdischarges, might obtain the vacuum equipment the certain vacuumdegree, should pump the technical parameter for 6×10-2 pumped withthe electrical machinery connecting shaft, high rotational speed,outlook small, structure compact, the fluid work was convenient, myfactory especially used the metal to blow the piece, Is suitable thefront level which pumps with the proliferation to pump, is precisetogether necessary, the laboratory, the medicine, food packing, unitand so on electron, electricity photosource uses.
Useful
This machine uses in to refrigerate, the electronic light bulbprofession, printing, the drugs manufacture, food packing, the medicalservice, the instrument, the chemical industry, the semiconductor, theelectricity vacuum, the gas analysis, the physics and chemistryexperiment and so on.
|
|
|
|
|
|
General description
HINDHIVAC developed a wide range of HIGH VACUUM PUMPING SYSTEMS for both laboratory and industrial use. These systems are manufactured in 4 standard models VS-65D, VS-75D, VS-114D, VS-150D, VS-250D and are suitable for the most of the vacuum applications.
HINDHIVAC also offers VS-350, VS-500 & special Vacuum Pumping Systems as per customer specifications. The standard Vacuum Pumping Systems consists of HINDHIVAC Rotary Vacuum Pump (ED Series), Diffusion pumps (OD Series) and other hardware like valves, baffles, collar, gauge and plumbing lines etc., fully integrated and wired. Special Vacuum Pumping Systems are offered with Rotary Pumps, Root Pumps & Diffusion pumps or combination as per customer requirements.
The HINDHIVAC Vacuum Pumping Systems, are trolley mounted for easy movement, are capable of achieving an ultimate vacuum of10 -6 m.bar. Liquid nitrogen trap (optional) is to minimize the back-streaming of oil vapors, and ensures clean and better ultimate vacuum of 10-6 m.bar range. The vacuum pumping systems are fitted with Pirani Gauge to measure the roughing and backing vacuum & Penning gauge for measuring the high vacuum
|
|
CMP-32 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17L Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-18 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure.
Technical Features:
1.High system pressure.
2.Non-metallic construction.
3.Compact size.
4.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
5. Uncontaminated flow.
|
|
|
|
|
|
General descriptino
HINDHIVAC manufactures different models of Rotary Piston Vacuum Pumps. These Rotary Piston Vacuum Pumps are robust and are most reliable. They can be used in combination with Roots Vacuum Blowers.
These Piston Pumps are extremely useful in handling high volumes of gases and are provided with Gas Ballast Valves to pump out condensable vapors. These piston pumps are built to give uninterrupted service even under strenuous working conditions with economical power and oil consumption.
These Piston Pumps are water cooled to ensure continuous duty with high efficiency. The Piston Pump has a unique design in which the pump ensures that while the piston continues to rotate it maintains isolation of the compression and the suction cycle, drawing out the compressed air through the exhaust valve. The pump has a low oil charge and the gas ballast is provided to avoid oil contamination due to condensable vapors. This Piston Pump is water cooled to avoid over heating and for continuous running
|
|
|
|
|
|
General description
HINDHIVAC "FD" Series Rotary Pumps are designed to address the needs of all the major requirements like research as well as industrial applications.
Raw Materials are chosen keeping in view of continuous pumping requirements. Pressure tight, special grade, fine grain castings & high carbon steel for internal parts are hardened and ground to close tolerances. These ensure noise and vibration at negligible minimum levels. Compactness and minimum oil charge are the highlights of the design feature.
These Rotary Pumps have a gas ballast facility to pump most condensable vapors without any notable oil contamination. An anti-suck-back facility prevents oil entering the system in the event of pump being switched off due to power failure. An integral Oil pump ensures lubrication and sealing to build high vacuum.
These Rotary Pumps find application in the area like Impregnation, Nuclear particle study, Electronic Tube evacuation, Lamp manufacturing Industries, Air conditioning and Refrigeration, Freeze Drying, Gas circulation, vacuum forming, Filtration, Metalizing, Distillation, Vacuum Metallurgy, etc.
|
|
Features:
- Generates a vacuum of 696mm Hg (27.4") using water pressure above 7584 N/m2 (11 psi) and flow of 6 liters (1.5 gal) per minute
- Fits 6.4mm to 9.5mm (1/4" to 3/8") I.D. tubing
- Threaded faucet connection is 9.5mm (3/8") I.D
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
Con-Evator , PGT Vacuum receiver
High performance, environmentally-friendly vacuum hopper loaders covering all aspects of modern conveying technology for plastic materials. The PGT series is based on the vacuum principle and gives a clean, low-noise conveying of materials. No compressed air is required because of a unique non-polluting filter cleaning system. The specially engineered blowers also ensures optimum reliability and consistency..
|
|
|
|
