|
|
|
Kinney KC & KTC Series Multi-stage rotary piston vacuum pumps provide pumping speeds of 5-112 CFM (8-190 m³/h) with ultimate pressures of 0.2 milliTorr (0.027 Pa). Our KTC series vacuum pumps include our exclusive triplex piston design to eliminate vibration.
|
|
High Throughput/Portable vacuum for:
- Glove Box
- Desiccator
- Storage Under Vacuum
- Air Sampling
- Material Handling
Features
- Free Air Displacement to 4.6 CFM
- Vacuum to 26 in. Hg, pressure to 10 PSIG
- Oil-free
- Continuous-duty Operation
|
|
|
Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan for cooling. UVD vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar.
|
|
Meet our High Vac Dia-Va®c…… the Highest quality vacuum pumps on the market. You will find the High Vacuum Dia-Vac® pumps to be extremely reliable and quiet with minimal vibration. Available with General Purpose, Explosion proof, Air Driven, TEFC, and DC motor options. Ultimate vacuum to 3 torr (29.8 InHg) in quad head configuration or 10 torr (29.5 InHg) in double head series configuration.
High Vac Diaphragm Pump - UL/CSA Div. I C/D motor (RVA2-FT-EA1 shown here)
|
|
Non Corrosive Duty
- Filtration
- Aspiration
- Desiccation
- Replace water aspirator
- Vacuum Drying
- Chamber Roughing
Features
- Vacuum and Pressure - to 60 Torr (27.6"Hg) and 106 Pascal (100 PSIG)
- Three Sizes - 22 L/min, 34 L/min, 45 L/min
- No Water or Oil
- Vacuum and Pressure Regulators and Guages - simple to adjust and monitor vacuum level and delivery pressure
- Inlet Water Trap - float ball rises to sear off pump from accidental ingestion of water.
- Muffler - quiets pump and fliters discharge air
- Low Cost
|
|
Fossa scroll pumps contain neither lubricating, sealing nor gear oil in the pumping chamber resulting in completely clean oil-free vacuum.
Fossa scroll vacuum pumps are utilised for high vacuum applications that are clean and dry.
Features
* Non-contact and oil-free compression
* No maintenance, no wearing parts
* Low noise levels
* Light weight and compact, therefore easy to transport
Application
Ideal for use in various industries such as Semiconductor, Electronic, Laboratory and Research
|
|
The Seco vacuum or pressure pumps are oil-free pumps with self-lubricating vanes made of special carbon. They are ideal pumps for all industrial applications requiring totally oil-free operation. The Seco Print model is designed for used in Packaging, Print and Paper applications.
Features
* Easy to install
* 100% oil-free air
* Low noise levels
* Extra long-life composite vanes
* Low maintenance
Application
Ideal for use in various industries such as Packaging, Printing & Paper, Food Industry, Wood Industry, Handling, Environmental Technology and many more.
|
|
Quiet, efficient operation
Four-headed design with chemically resistant solid ETFE and PFA heads
Recommended for use with acidic environments such as HCl, TFA, Acetic and Formic Acids as well as organic solvents
Small compact footprint
Easily connects to any SpeedVac system
Comes complete with ANT100 Post Trap for adding trapping and neutralizing solutions
|
|
oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
|
|
Sterling Service has more than 200 specialised service centres around the world. These are supported by a network of manufacturing centres and 50 wholly owned sales operations. All of this ensures the highest level of service is provided to our customers at a local level.
WHATEVER THE SOURCE OF YOUR ORIGINAL VACUUM EQUIPMENT - STERLING SERVICE SUPPLIES THE SOLUTION FOR YOUR PUMPS & COMPRESSORS.
- Replacement vacuum pumps
- Replacement compressors
- Emergency breakdown cover Repair
- Extended warranty
- Refurbishment
- Service contracts
- Original spare parts
- On-site service
- Re-engineering
- Commissioning-
- Installation
|
|
The Power Pump Portfolio.
Roots pumps for Every Low and Medium Vacuum Applications.
Our Roots pumps offer pumping speeds ranging from 250 to 25,000 m3/h. They can be safely employed for low and medium vacuum applications in the coating or semiconductor industry, in research & development, metallurgy or in chemistry and process technology.
The gear and bearing chambers in our Roots pumps are completely separate from the gas pumping chamber. Because the rotors operate without making contact, dry, hydrocarbon-free operation is assured.
A further advantage: Thanks to air cooling, operating costs are significantly lower than with water cooling. The design principle of our proven Roots pumps has also been expanded to include magnetic couplings. These hermetically sealed pumps make oil leaks a thing of the past. We have also developed special pumps for processes that take place in explosive environments or for evacuating explosive gases.
|
|
|
KINNEY rotary piston vacuum pumps provide vacuum levels to 0.2 milliTorr (0.027 Pa) with long operating life. Our triplex piston designs are inherently balanced to eliminate vibration.
|
|
Available in oilless or lubricated, motor-mounted or separate drive, Gast rotary vane compressors and vacuum pumps offer a wide choice of capabilities.
• Oilless or lubricated styles will accommodate a wide variety of pneumatic applications
• Self-lubricating, self-adjusting vanes on oilless models provide like-new efficiency throughout the service life of the pump
• Motor mounted or separate drive versions allow versatility in selecting the right pump for your application
• Miniature through larger size models offer an extensive performance range to satisfy most any need
|
|
From 2 to 100 m3/h (1.4 to 85 cfm) : THE BEST WAY TO MEET YOUR REQUIREMENTS
PASCAL series rotary vane pumps can meet the requirements of your specific application by offering a wide range of dedicated series :
• I series
Analytical instrumentation
• SD series
Standard non-corrosive
• C1 series
High resistance to corrosion
• C2 series
Most corrosive/Semiconductor
• H1 series
Hermetic, high tightness level
|
|
|
This new series has been studied to face different versions requests coming from the European Market and to allow different mounting possibilities. The STAR series is composed of 3 models (STAR 60, STAR 72 and STAR 84) with capacities from 10680 lt/min. to 14420 lt/min. It is supplied as series with the force feed lubrication, side outlets manifold with 1 revolving elbow, rear cast-iron oil tank (/...V version) or side sheet oil tank (/...F version) to allow the application where the space is restricted or to the more convenient place in the installation. The STAR series may be supplied, on request, with different kinds of fittings which may help the installation and/or the use of the pumps same. Every model of this series is available in versions /M with overdrive, /P for pulley application, /D direct drive, /H for hydraulic transmission and /K for hydraulic pump application.
|
|
V-VC
Volume flow: 50 to 1535 m³/h
Vacuum: 0,1 mbar
The oil-lubricated rotary vane vacuum pumps V-VC are based on three different designs:
• Compact pumps with overhung bearing design
• Medium ranges with rotors supported on both sides and flexible coupling
• Large pumps with rotors supported on both sides, flexible coupling and double walled cylinder
V-VC-machines are air cooled in standard version. An oil-water cooler is available for high ambient temperatures or for heat recovery. The exhaust air is cleaned in a built-in mist filter with a very high separation efficiency ensuring oil free operation in all working conditions.
Typical Application:
Central vacuum systems, Environmental engineering, Food processing, Industrial applications, Medical industry, Packaging industry, Pick and Place, Pneumatic conveying, Vacuum drying, Woodworking industry
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
Thanks to the high quality of material and components and to the technology of construction, the single stage UVL vacuum pumps achieve one of the best vacuum degrees attained by similar units available on the market.
UVL vacuum pumps are suitable for evacuation of small closed systems or for continuous suction within a pressure rate from 200 to 2 mbar (up to UVL18), from 400 to 0,5 mbar (from UVL25), from 400 to 10 mbar (RA version).
|
|
RV Rotary Vane Pump Range
RV series pumps are unique in their capability to deliver high or low throughputs with high ultimate vacuum, which combined with ultra-low noise levels makes them ideal for a wide range of applications and environments.
* 48 dBA and intrusive frequencies minimised.
* Dual mode.
* Easy-to-use gas ballast.
* Fast acting inlet valve for system protection.
* High torque, dual voltage/dual frequency motor, electronic start relay.
* Efficient high pressure lubrication.
* Oil-tight with printed gaskets, effective shaft seals.
* Clamped-in sight glass.
* Oil box well contains filling spills.
* Hi-tech polymer blades, large diameter, easy-clean oil passages.
* Consistent, built-in quality, cast bar construction.
|
|
XDS Scroll Pump
Scroll pumps are an excellent alternative to rotary vane pumps where oil free pumping is desirable. The innovative new XDS pumps in particular use a patented bearing shield to isolate the vacuum environment from all forms of lubricant not only making them totally dry, but also protecting the bearing from any process gases. Vapor handling is enabled by an adjustable gas ballast; this allows the range of pumps to satisfy many applications that were previously off limits to scroll pumps.
|
|
The new "K" series blowers-exhausters, thanks to a unique modular design and the latest refinement in blower/technology, provide the highest ratio of performance to power.
Increased reliability, silent operation and reduction in size and weight; these are the best in the today's market.
For any further info, please visit our web site.
|
|
4 PUMPS designed for semiconductor processes
Description Applications
Adixen maglev hybrid turbomolecular pumps
5 corrosion proof features
- Automatic balancing system
- Built-in 75°C heating system
- 5 active axes
- Inert gas purge
- Inverted dynamic seal (only for ATH400 and ATH 1300)
High throughput applications
ATH 400 M, ATH 1300 M,ATH 1600 M and ATH 2300 M are designed for high pressure, high throughput pumping needed for semiconductor and other thin film coating applications.
A compact and modern design
- Adjustable rotational speed for optimizing pumping parameters
- Very high MTBF
- Low cost of ownership
- Low noise and vibration levels
- Battery free
|
|
Turbopumps for all High and Ultra-High Vacuum Applications.
Turbopumps generate vacuums in the high to ultra-high vacuum range
of up to 10-11 mbar.
Applications
In the production of many products of everyday life and in many areas of engineering research, vacuum technology plays a decisive role. Here the turbopump is of decisive importance in providing extremely pure process conditions.
|
|
STP Magnetically Levitated Turbomolecular Pumps
The STP magnetically levitated turbomolecular pumps are the first choice for high-up time, hydrocarbon free pumping. The multi-axis magnetic bearing system is used to suspend the rotor during operation, ensuring there is no risk of contamination while minimizing vibration, noise and maintenance requirements. The STP pumps can be fully interfaced with advanced controllers to operate on a wide range of applications and processes.
|
|
The award winning Q-Series range offers numerous benefits, these being adopted into other products. The Q-Series offers a differentiated solution with proven latest technology providing an environmentally friendly package such as with full liquid containment, excellent fuel savings and sound attenuated canopies. Operating benefits include durability, reliability and excellent performance with elongated solids handling capability.
SPP has also built excellent low-life cost benefits into the designs to ensure maximum return on your capital expenditure. Reduced maintenance through the use of quality materials and low fuel consumption greatly assist in this area.
|
|
Features
- Complete system - pump head, tubing & drive
- Lok-n-Flow cartridges - easily replaceable tubing cartridges
- Bi-directional (reversible) flow control & max flow button
- Variable speed
- Console drive
- Ready out of the box
|
|
DBM Series (Exhaust & Suction)
Silent Air Pump Built-in Type
* Extremely Quiet
* Long Life
* Low Power Consumption
* Low Vibration
* Oil-less, Contamination-free exhaust air
* C.E. Compliant and U.L. listed Models
Ideal for: Medical /Environmental /Consumer/Food Industrial
*Vacuum Packaging.
*Air Surface/ Air Beds/ Air Mattress
*Nebulizer
*Aspirator
*Automatic/ Robotistic Equipment
*Air Sampling
*Gas Analyzer
*Ozone Generator
*Massage Chair
|
|
Features
* Voltage range from 180V to 240V for single phase
* Voltage range from 300V to 440V for three phase
* Class of insulation ‘B’ Models are with IP-44 protection
Applications
* Drying
* Evaporation
* Distillation
* Evacuation of air from suction pipes and chambers
* Filtration
* Sterilisation
* Condensation
* Priming of large pumps
* Twist drilling machine
* Bottle filling
Range
* Vacuum up to 650 mm of Mercury
* Air flow rate up to 55 m3 /hr
* Power rating 0.75 kW to 2.2 kW (1 hp to 2 hp)
|
|
Meet our High Vac Dia-Va®c…… the Highest quality vacuum pumps on the market. You will find the High Vacuum Dia-Vac® pumps to be extremely reliable and quiet with minimal vibration. Available with General Purpose, Explosion proof, Air Driven, TEFC, and DC motor options. Ultimate vacuum to 3 torr (29.8 InHg) in quad head configuration or 10 torr (29.5 InHg) in double head series configuration.
High Vacuum Double Head Diaphragm Sampling Pump (RVA2-AT-BA1 shown here)
|
|
|
|
