|
|
ADI’s Standard and Mini Size Dia-Vac® pumps are available with Air driven motors….an ideal choice for extreme hazardous or remote sampling applications. Maximum performance 1-150 LPM, 0-29.9”HG or 0-75 PSIG.
Single Head Mini Diaphragm Sampling Pump (M161-FT-DX0 shown here)
|
|
|
|
|
|
The various designs and ultimate pressures of R 5 type pumps allow the pump to be easily and optimally adapted for any process. R 5 type vacuum pumps are designed for continuous operation in industry and have been successfully used for many years in various applications.
Compact design, air cooling and easy access allows rapid and simple servicing with long periods between service. 0.1 mbar to 20 mbar covers every rough vacuum application. No preventative maintenance apart from routine oil and filter change is required.
Features
* Ultimate end pressure of 0.1mbar (previously 0.5 mbar)
* Increased suction capacity at low pressures
* Reduced model variants
* Same price as old model
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in various industries such as Packaging, Chemical & Pharmaceutical Industry, Plastic, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy, Remediation and many more.
|
|
The R 5 Compact range of pumps shares the same design features as the R 5 standard range, but they are optimised for use in applications and machines where space is limited.
They also inherit the wide operating range, easy adaption, continuous operation and excellent operating record of the R 5 range and their compact design makes them easy to service.
No preventative maintenance apart from routine oil changes is required.
Features
* Proven reliability, also under continuous operation
* Air-cooled – no water needed
* Excellent water vapour tolerance
* Standard mounted oil mist eliminator
* Easy maintenance
Application
Ideal for use in Packaging, Chemical & Pharmaceutical Industry, Plastics, Printing and Paper, Food, Beverage, Wood, Pneumatic Conveying, Brick Making, Drying and Impregnation, Adsorption and Degassing, Handling, Environmental Technology, Metallurgy and many more.
|
|
The UV series vacuum pumps, complying with international regulations, are valued in many industrial applications thanks to their low life cycle cost, safety, environmental compliance, low noise level, compactness, high performances, design simplicity, reliability and durability.
Some applications are: metal can production, electronics, food processing, food packaging, glass containers moulding, plastic / rubber, polymers production, EPS, drying processes, thermoformning, printing and paper etc.
|
|
|
Welcome to the newest Line of rugged Dia-Vac® Pumps! The High Performance double head Dia-Vac® pump will provide greater response in the most demanding applications!!! These durable pumps are available with General purpose, TEFC, Air Driven, Explosion proof UL/CSA Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts are available with aluminum or 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 0-84 LPM, 0-60 PSIG. You can count on the new high performance Dia-Vac to pass you gas with confidence!!
|
|
ADI’s Dia-Vac® pumps are available with Explosion proof UL (Class I, Div I group B, C, D), CSA, ATEX (EExd IIC T4 IP65), and Air Driven motor options. Maximum performance: 0-29.9” HG, 0-150 LPM, 0-75 PSIG
Single Head Diaphragm pump with XP motor (R221-GT-EA1 shown here)
|
|
ADI’s Dia-Vac® pumps are available with Explosion proof UL (Class I, Div I group B, C, D), CSA, ATEX (EExd IIC T4 IP65), and Air Driven motor options. Maximum performance: 0-29.9” HG, 0-150 LPM, 0-75 PSIG
High Performance Diaphragm Sampling Pump (H302-FT-NA1 shown here)
|
|
Meet our High Vac Dia-Va®c…… the Highest quality vacuum pumps on the market. You will find the High Vacuum Dia-Vac® pumps to be extremely reliable and quiet with minimal vibration. Available with General Purpose, Explosion proof, Air Driven, TEFC, and DC motor options. Ultimate vacuum to 3 torr (29.8 InHg) in quad head configuration or 10 torr (29.5 InHg) in double head series configuration.
High Vac Diaphragm Pump - UL/CSA Div. I C/D motor (RVA2-FT-EA1 shown here)
|
|
A part of our oil-less compressors are also availabel as vacuum pumps. They are the ultimate solution when a quiet, reliable vacuum pump is required. A low noise and vibration level characterizes the compact, mobile JUN-AIR vacuum pumps.
|
|
Meet our High Vac Dia-Va®c…… the Highest quality vacuum pumps on the market. You will find the High Vacuum Dia-Vac® pumps to be extremely reliable and quiet with minimal vibration. Available with General Purpose, Explosion proof, Air Driven, TEFC, and DC motor options. Ultimate vacuum to 3 torr (29.8 InHg) in quad head configuration or 10 torr (29.5 InHg) in double head series configuration.
High Vacuum Double Head Diaphragm Sampling Pump (RVA2-AT-BA1 shown here)
|
|
| ... products without technical information |
| |
|
|
|
|
The Enerpac ZA4 - The Next Generation in Air Powered Hydraulic Pumps
Introducing the ZA4-series, Enerpac’s newest high-pressure hydraulic air-driven pump designed for in-plant, industrial applications and medium to large construction projects. The new ZA4 pump features the Z-Class high efficiency pump design—a design known for its higher oil flow and bypass pressure. Whether powering a cylinder or operating a tool, the ZA’s industry-leading hydraulic flow at 700 bar will improve productivity in any application. And, because of their ATEX 95 certification, the Enerpac ZA Pumps are safe for use in environments such as refinery, petro-chemical and oil & gas processing.
Reservoirs come in 4 to 40 litres capacities. A sight gauge on the 4 and 8 litres models and a level gauge on the larger reservoirs allow quick and easy oil level monitoring. The manual control valves on ZA4-series pumps come with built-in user adjustable pressure relief valve. Standard models are available to fit most applications and custom configurations, when required, are available from an extensive ordering matrix.
The optional heat exchanger warms exhaust air to prevent freezing and cools the hydraulic oil.
Enerpac ZA Series Air Hydraulic Pumps—tough, dependable and innovative.
|
|
|
|
|
|
Hydratron Air Operated Hydraulic Pumps are capable of generating output pressures of up to 45,800 PSI ( 3,160 Bar ) when supplied with just 100 PSI ( 7 Bar ) air pressure. There are 4 model ranges offering flows of up to 7 gpm ( 31.7 Ltr per min ).
These pumps will maintain pressure within a system indefinitely without consuming power or generating heat plus their output pressure can be infinitely varied by simply regulating the driving air pressure.
These pumps are ideal for pressure testing, chemical injection and for hydraulic power applications. Standard models are suitable for oil or water service having wetted parts manufactured from stainless steel and aluminium bronze. Options include all stainless steel wetted parts for pumping more aggressive chemicals with isolation chambers which keep the pneumatic and hydraulic sections of the pumps completely separate. This is particularly desirable when pumping hazardous fluids.
Pumps can be supplied individually or mounted in Power Pack form in which case they are mounted within metal frames complete with reservoirs, all necessary air controls, output pressure gauges and pressure release valves.
|
|
- Air Drive line lubrication not required.
- Self-priming for immediate operation.
- Compatible with all hydraulic fluids, plain water, distilled &
deionized water, solvents, mild chemicals and most liquefied
aerosol type gases.
- Range of models to provide up to 80,000 psi intermittent
output pressure.
- Stainless steel hydraulic body, check valves, and trim are
standard, except -4 and -7 models.
- Alternative gases that can drive the pump include nitrogen,
vapor from liquefied gas, pipeline natural gas and sour
natural gas with proper modifications.
- Offer a wide range of standard modifications.
|
|
SKF Air-driven Hydraulic Pumps, THAP series
30, 150, 300 and 400 MPa (4 350, 21 750, 43 500 and 58 000 psi)
The THAP Air-driven Hydraulic Pumps are available in four different pressure versions. They can be used for mounting OK Couplings, large pressure joints such as bearings, flywheels, couplings and railway wheels. The pumps consist of a high-pressure hydraulic pump, driven by an air piston.
The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets, which consists of pump, pressure gauge, adapter block, highpressure pipe and connection nipples.
|
|
The air-hydraulic BELL units are meant to operate single and double acting cylinders depending on the versions. This type of pump can be applied in all the hydraulic applications, especially in those which require high performances and pressures, and in all cases in which the oil flow must be modulated and controlled.
There are many applications, in the industiial field, such as stirrup, presses, extractors, pullers, hose fitting, bead breakers, clamping equipments, as well as in the automotive field for example car and motorbike lifts, pulling bars for bodyworks straightening benches.
|
|
External adjustable pressure relief valve (behind sight glass)
Lower air consumption and operating costs
Return-to-tank port for use in remote valve applications
Internal pressure relief valve provides overload protection
High efficiency cast aluminium air motor
Air pendant for remote control operation
|
|
PP - Air/hydraulic pumps (series 1000)
PP-1000 air/hydraulic pumps are very compact one-stage pumps that work in any position, horizontally or vertically thanks to a rubber bladder built in to the tank. The pumps can be operated by hand or foot.
• High oil flow.
• Easy to fill and check oil level.
• Safety valve prevents overfilling the tank.
• Return oil line can be connected to oil filler hole.
PP70-1000 - for those pumps we recommend gauge AMT801 and gauge adapter AVM204. Other combinations of gauge and gauge adapter are however possible.
PP70-1000/LS201, PP70-1000/LS250 - PP70-1000 pumps are available in a pre-mounted version with 2 m or 2,5 m hydraulic hose, quick coupling (AQI7) and swivel coupling (ASE10).
|
|
Mini hydraulic pumps model PAY
With compressed air driven motor 700 bar
These mini-pumps are driven by an air-powered motor and can be connected to any supply source of compressed air. These compact low-cost pumps can operate all single-acting or double-acting hydraulic cylinders up to a max. operating pressure of 700 bar.
Features
- Pedal in neutral position - motor stands still, cylinder stands, pressure is held.
- Pedal depressed - motor starts, cylinder advances, pressure is built-up.
- Pedal pushed forward - motor stands still, pressure is released, cylinder retracts.
|
|
| ... products without technical information |
| |
Autoclave Engineers Offers High Pressure Air Driven Pumps to 60,000 psi
Autoclave Engineers has designed group of Air-Driven, Positive-Displacement, High Pressure Liquid Pumps designed for service with Oil, Water and many Chemicals.
The “ASL Series” is available in a variety of drive ratios and will have both Single and Double Air Drive designs that are capable of up to 60,000 psi (4135 bar). Manual “Hand-operated” options will be made available in our “ACHL Series” pump line. Our AHL Double-Acting, Double Air-Drive Series pumps are designed for those that are looking for the combination of both high flow and high pressure.
Features Include:
• Easy to Install and Operate
• Standard Drive Ratios for Pressures to 60,000 psi (4135 bar)
• Pressure Maintained without Energy Consumption
• Requires No Lubrication
• External Spool Valve for Easy Maintenance
|
|
Swing Piston Compressors and Vacuum Pumps for Air
Swing piston compressors produce oil-free compressed air and vacuum. They will evacuate, transfer and compress air without contamination. The KNF swing piston system offers a higher flow rate for a given size than the corresponding diaphragm pumps.
|
|
Capability of ultimate pressure, flow or output horsepower
Compatibility with a variety of liquids
|
|
Advantages:
- Working pressures up to 5,000 bar.
- Low noice level even at high cycling speed.
- No mechanical pilot valves.
- Proven reliability under severe conditions.
- Modular, robust and modern design.
- Easy to change ratio of the pump.
- Easy to convert a pump from single- to double acting.
- Light weight air cycling spool.
- Easy maintenance.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
The air driven high pressure liquid pumps cover a range from 0 to 37 ltr/min. Pressures range from 0 to 2400 bar. All wetted parts are made of stainless for use of oil and water. Applications are pressure testing of tubes, hoses, valves and systems. Delivery ex stock.
|
|
- Low Noice level.
- Working pressure up to 2500 bar / 36,250 psi.
- Inlet and outlet check valve cartridges.
- Air operated, optional manual operated.
- Easy and low cost Maintenance.
- Al parts made of non-corrosive materials.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
