|
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs
|
|
|
ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM.
|
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
* Patented COAX® technology.
* Available with a three-stage COAX® cartridge MIDI. Choose an Si cartridge for extra vacuum flow, a Pi cartridge for high performance at low feed pressure or an Xi cartridge when high flow and deep vacuum is needed.
* Substantially lower air consumption as compared to conventional ejectors.
* Modular design.
* Available with multiple connection alternatives.
* Low noise level.
* Short evacuation time.
Supplied with a vacuum gauge.
|
|
Positive Displacement Vacuum Pumps
Vacuum pump packages are recommended for the higher rates over longer distances and continuous service. They are also used on many applications where a venturi unit would be adequate but sufficient compressed air is not available. They feature a positive displacement lobe-type blower and are complete packages with motor and blower, secondary material filter on the inlet and muffler on the outlet. These units are mounted on a heavy duty, forkliftable base and are equipped with belt guards conforming to current OSHA standards. Included are a glycerin-filled vacuum gauge and a vacuum relief valve. The secondary filter protects the pump from any carryover of material from the material receiver. Cartridges are easily changed by removing the end cover. Optional differential pressure gauge and/or switch can be furnished to indicate or shut down if filter should become restricted.
|
|
|
|
|
|
With a wide range of granule receivers ranging from 1,5 to 140 dm3, Piovan is able to offer the ideal solution for all conveying requirements. Three versions of vacuum receivers are available: granule receiver entirely in stainless steel (C models), version with 3 sight glasses (SR models) and in the configuration with glass section (GR units).
Maintenance:
> Effective and rapid cleaning operations
> wide filtering surface and solid steel frame, to guarantee continuous functioning of the system with no production stop for maintenance operations or replacement of the filter
> anti-wearing materials
Design: magnetic sensor integrated in the control box and factory pre-set. A led allows the operator to monitor when the sensor is activated.
Simplified and rapid installation: The possibility to adjust at 360° the adoptor ring as well as the material and vacuum lines, not constrained one another, simplifies the installation of the receiver in line with the plant configuration.
SIMPLIFIED AND ENHANCED OPERATOR INTERFACE: Easy3System
Plug&Play: The receivers are immediately ready for operation once connected, with factory pre-set loading cycles for optimal functioning. The working status and possible alarms are signalled in a user-friendly way with bright green and yellow leds positioned on the upper part of the control box, in a visible position.
The KEYPAD permits to customise the hopper loader’s functioning, setting the conveying times, the pause time between the loading cycles, the maximum number fo unsuccessful loading cycles, the modes of filter cleaning, and the functioning of the proportional valve.
Easy3System is compatible with the previous versions.
|
|
|
|
|
|
FEEDMAX B and BS/4 Series Loaders
The FEEDMAX B and BS/4 series loaders are built for highest functionality and demanding applications. The modular design of these vacuum loaders guarantees specific adjustment to meet individual customer requirements, as well as for simple cleaning.
- Complete flexibility – Stainless steel line size reducers can be easily interchanged to maximize flexibility.
- Superior wear resistance – Pneumatically actuated cast stainless steel material and vacuum valves for highly abrasive feeding applications.
- Low Maintenance – Interchangeable mirror finish stainless steel center section offers low maintenance and allows hopper capacity to be easily changed.
- Completely dustproof – Pneumatic discharge shut-off valve design permits clean
room operation for standard loaders.
- Highest operational reliability – Dustproof and pneumatically controlled material shut-off discharge valve.
- Ergonomic design – A hinged lid without valves or hose connections offers unmatched accessibility
for simple cleaning.
- Simple cleaning – One self-locking toggle latch is easily accessible and opens towards the operator.
- Easy operation – Modular assemblies with fully accessible quick release band clamps can be easily cleaned and interchanged.
- Easily visible – Status LED`s and pluggable control cable for all network control systems.
- Reliable – Material demand via proximity sensor standard with high heat execution.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
Con-Evator , PGT Vacuum receiver
High performance, environmentally-friendly vacuum hopper loaders covering all aspects of modern conveying technology for plastic materials. The PGT series is based on the vacuum principle and gives a clean, low-noise conveying of materials. No compressed air is required because of a unique non-polluting filter cleaning system. The specially engineered blowers also ensures optimum reliability and consistency..
|
|
| ... products without technical information |
| |
Mink round brushes - Highly efficient tools with countless applications
Mink round brushes can be applied to solve problems in a wide range of areas, and our engineers have the ideas to exploit this potential. When it comes to flexibility, no industrial tool can match these brushes. We offer a huge selection of models: roller brushes (with stub shafts), round brushes (with hollow centre spindle, no shaft), the Mink HP-System (two half segments, without shaft) and the Mink Zick-Zack-System (modules, with or without shaft). Finally, there are Mink web spreader brush rolls for modern processing of plastic film, textiles and many other kinds of web.
Advantages:
• Suitable for goods of all kinds
• Versatile and economical
• Maximum cleaning power combined with optimum surface care
• Form and stiffness according to individual requirements
• Less need for cleaning agents thanks to the mechanical action of the bristles – economic and ecological benefits
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
|
The modular principle underlying our one-way system of trapezoidal toothed roller brushes provides for fast, low cost changes of brushes. They can be installed and similarly removed by a simple hand operation. The teeth lock securely (and in a non-twist manner); as a result, a gap-free bristle surface is assured. Precise true running is guaranteed at all times. The DT system consists of brush segments which are mounted to the brush core with two locking collars. Due to the special modular principle on which they are based, worn individual segments on a roller brush can be replaced
|
|
|
|
|
|
Air Conveyors - Ring-Vac™ Pneumatic Conveying System:
Available in standard and threaded versions for regular and high temperature applications.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System has virtually no moving parts, convey's air at high rates and long distances. Utilizing compressed air for a powerful, efficient venturi action along its length in a compact design for high capacity conveying over large distances.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System is available in both coated aluminum or high temperature stainless steel. Simply clamp a standard hose size to each end of the Ring-Vac™ to create this high energy conveying system. No moving parts for maintenance free operation with capacity and flow controlled with a pressure regulator.
Air Conveyors - Ring-Vac™ Pneumatic Conveying System is available in 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm) sizes. Any size beyond that can be prohibitive for most applications due to high compressed air requirements.
In addition, beyond 3", the vacuum ability begins to drop significantly except for highly intermittent applications. For applications beyond 3", a blower system often becomes far more economical except in a rare number of possible applications. However, larger size versions are available if required as well as special sizes.
Coated aluminum and high temperature stainless steel Ring-Vac™ Air Conveyor can convey all types of solids in large volumes over great distances with no moving parts.
- Made of an coated aluminum body with no moving parts. High temperature stainless steel models are available for high temperature and corrosive applications.
- Standard sizes to fit standard hose diameter for easy clamping. Threaded versions connect easily to regular pipe thread: 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 2" (51mm), 2-1/2" (64mm), and 3" (76mm). Special sizes can be manufactured if required.
- Utilizing a pressure regulator will control the flow material.
- Instant ON/OFF with no moving parts, no electricity or explosion hazard.
- Longer life in difficult environments than competitive models.
- Ease of use.
- Simple and easy control of material flow.
- Maintenance free operation.
|
|
ICEsonic S-series Air Amplifier.
For an efficient hi-flo operation.
Compact design and no maintenance required.
Products such as ground spices and flour or wastes from textile and paper, fumes and dust can all be conveyed over considerable distance.
Available: Anodised Aluminium and Stainless Steel, from 5 to 50 mm.
|
|
Parker’s RG01 Nozzle, Venturi, and Hot-Gas Bypass Distributors are used for two-phase refrigerant distribution to coils. These need to be mated to a Parker Fixed Restrictor Assembly, a thermal expansion valve (TXV), or other device for refrigerant metering.
* Various nozzle orifice sizes are available for distributor housings.
* Nozzle-style distributor-housings are available for air-conditioning and heat-pump systems.
* Venturi distributors are available with a wide range of configurations and hole sizes.
|
|
Transportation fan, directfloated, circulating or being certain cover disk.
Sizes:
VRT 400 - VRT 1,250 (D mm)
Employment:
To the promotion of dust, soot, splinter and fiber parts, to 90°C
Technical data:
V = to 15 m ³ /s
Delta pt = to 6,000 Pa
P = to 75kW
Optionally with Keilriemenantrieb
|
|
|
|
|
|
FD range, air conveying blower
-Blower housings made of abrasion resistant cast iron
-hinged housing cover lid for inspection and cleaning
-welded sheet steel impellers with radial blades
-Maintenance-free squirrel cage rotor motors to IP54
The units can only be supplied in the housing position pictured.
Accessories: Various connectors for both inlet and outlet side.
RD F range
The RD F range can be used for conveying of light and non-abrasive bulk.
The blower parts are made of aluminium cast, the impellers are made of welded sheet steel. The solid construction of the practically maintenance
free medium pressure blowers is the basis for a long lasting service life and low operation cost. Inspection and cleaning may only be carried out at these blowers by unscrewing the housing cover plate. All drive motors are made to IP 54 enclosure, class F thermal insulation and comply with EN 60034-1 (VDE 530 Part 1). The motor power is oversized in order to have sufficient reserve for the conveying.
|
|
... see all the products in the category
Blowers
|
It is, with gravimetric measuring, the force of Spiroflux.
Our achievements many and are varied. They touch all the fields of the plasturgie until the agro-alimentary one, and they are systematically adapted to the particular need for the user (many been useful machines, flows, standards and many matters, rates, monitoring,...).
Today, all our centralized installations are managed by industrial automats.
They are conceived, marketed and installed by our teams.
And more and more, our customers delegate preventive maintenance to us, through annual contract.
The data-processing tool, there too, brings more and more possibilities of development by the supervision of the centralized installation, the communication with the CAPM, the filing and the edition of statistics of production, the monitoring of the process,... Spiroflux has many references on the matter, in France and abroad.
|
|
| ... products without technical information |
| |
|
|
|
|
In response to industrial customer needs, Hutchinson Transmission has specially developed the ConveyXonic® belt for roller conveyor producers.
The ConveyXonic® is the « 4 in 1 » belt capable of transporting loads from 1 to 1 200kg (2 to 2500 lbs.) as well as replace the four systems used in the conveyor assembly (flat belt, round belt, chain and timing belt).
The belt's elastic properties allow for at least a 30% reduction in costs by using 1 motor for twenty rollers while at the same time adding the advantages of improved life span and absorption of shocks and vibrations.
With a potent torque transmission - up to 4 times greater than an O-Ring - increased package flow speed up to 4 meters per second, the ConveyXonic® belt improves efficiency while working silently, requiring little maintenance since lubrication and retensioning and are not needed, and ending corrosion concerns.
Easy to use thanks to an automatic or semi-automatic installation, our ConveyXonic® product line has already been designed for you.
It is standardized in function of the center distance, the center distance tolerance and the transported weight.
The ConveyXonic® is available worldwide, with two, three of four rib profiles (PJ2, PJ3, PJ4), through our distributors.
We would be happy to put you in contact with the distributor closest to you.
.
|
|
Falk™ Drive One® Alignment-Free™
Ratios: 9:1 - 35:1 Power: 22 kW to 630 kW (30 to 800 hp) Torque: 5.6 to 130 kNm (30,000 to 1,150,000 lb-in)
11 sizes
Horizontal output
Solid and hollow outputs
Right angle shaft mounting
Soft start conveyor drive solution
Universal left/right design, no foundation or shaft alignment required
NEMA and IEC motor compatible
|
|
Magnetic separator for conveying lines.
The PneuMag is a high intensity magnetic separator designed to remove ferrous and stainless steel scrapings from pneumatic conveying lines operating at up to 25m/s.
It features a centrally positioned high intensity magnetic grid with quick release toggle clamps, tamper proof cover plate and totally stainless steel construction.
The PneuMag is particularly suited to flour, sugar and other powder and granulate processing.
High magnetic performance - 9000 Gauss
Reduces 'spark' risk
316 grade stainless steel construction
Cleaned in under 30 seconds
Tamper proof guard
Silicon rubber, metal detectable seal
|
|
|
|
see the results for the following category : 
