|
|
Mini linear piston block-compressor not lubricated.
- Nominal capacity: 5 to 50 l/min,
- Maximum Pressure: 0,1 to 2,5 bar.
|
|
CMP-17L Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-32 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow and low pressure.
Technical Features
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-18 Liquid(water) micro pumps are well suited for transferring and evacuating neutral or corrosive liquid and can against high pressure.
Technical Features:
1.High system pressure.
2.Non-metallic construction.
3.Compact size.
4.High level of water tightness thanks to the closed diaphragm surface and special sealing system.
5. Uncontaminated flow.
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
|
DPP offers an assortment of quality gear pumps used in a wide range of applications, from critical medical devices to ink jet printing; from laboratory analysis equipment to water purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements.
|
|
External gear pumps from Micropump provide a continuous, pulseless flow. The rigid design of the gears and housing allows for high pressures and the ability to pump a wide range of fluids. Manufactured in an assortment of chemically resistant material options, these compact, magnetically driven gear pumps provide accurate fluid delivery in a durable, leak-free design.
Whether you use the cavity style or the revolutionary suction shoe design, Micropump gear pumps are engineered to deliver peak performance in any application and can meet the following specifications:
- Displacement range 0.017 to 24.5 ml/rev
- Flow rates to 42 L/min
- Differential pressures to 8.7 bar
- System pressures to 106 bar
- Max. viscosity 5000 cps
|
|
Pulsefree pumping with gear pumps up to 12 liter/min and differential pressures up to 5.6 bar.
REGLO compact gear pump, footprint only 10 by 18 cm
MCP programmable gear pump, IP65
|
|
Internal gear pumps from Micropump. No other technology offers precise and accurate fluid delivery with the same high-pressure and low-flow rate capabilities in such a small package. Tiny micro-annular pumps are suitable for low viscosity liquids such as deionized water, methanol, solvents, oil, and lubricants. High-precision rotors provide accurate flow rate control, helping conserve valuable liquids. Internal gear technology keeps pulsation to an absolute minimum for smooth, constant flow.
Product Summary
- Dispense rates as small as 0.5 microliters
- Flow rates to 288 ml/min
- Accuracy within +/- 1%
- Max. differential pressure 80 bar
- Max. temperature 60 degrees C
|
|
CMP-11 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-17 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP40 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
ALD130P-18F is a double diaphragm air micro pump which well suited for compressing air.
Technical Features:
1.Double diaphragm air pump.
2.Uncontaminated flow.
3.Non-metallic construction.
4.Compact size.
5.Maintaince free.
6.Can operate in any installed position.
|
|
Micropump's centrifugal pumps offer a reliable, simple, long-lasting design for higher flow applications. Using the unique leak-free magnetic drive technology, centrifugal pumps provide excellent chemical resistance and energy efficient fluid delivery. Integrated impeller and magnet assemblies reduce the number of rotating parts to maximize pump life.
Performance Summary
- 27 L/min at 9000 rpm
- 14 meters maximum head
- 13.6 bar max. rated system pressure
- 122 degrees C max. temperature
- Pumps up to 100 cps fluids
|
|
Micropump's centrifugal pumps offer a reliable, simple, long-lasting design for higher flow applications. Using the unique leak-free magnetic drive technology, centrifugal pumps provide excellent chemical resistance and energy efficient fluid delivery. Integrated impeller and magnet assemblies reduce the number of rotating parts to maximize pump life.
Performance Summary
- 27 L/min at 9000 rpm
- 14 meters maximum head
- 13.6 bar max. rated system pressure
- 122 degrees C max. temperature
- Pumps up to 100 cps fluids
|
|
The MICRO-MIX range of systems are compact, pneumatic or electrically driven piston pump metering and mixing systems.
They are used to either continuously apply or meter shots of low to high viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:4.
The material can be abrasive as well as filled.
The material is either supplied from pressure vessels or by feed pumps.
|
|
For simple and rugged pump operation, Micropump AC motors are the choice you can rely on. The drives are supplied with a driving hub and adapter plate that allow a wide-rand of magnetically driven gear pumps to be fitted using just two fixing screws. The result is fast and simple installation. The motors are available in either single- or three-phase configurations. IP 55 motor enclosure ensures protection of internal parts against dust and water.
Performance Summary
- IEC 56, 63, or 71 frame sizes
- Available power 0.09, 0.24, 0.25, 0.37, or 0.73 kW
- Torque from 0.31 to 1.7 Nm
- 1340, 1380, 1400, 2680, 2830, 2880, or 2900 rpm ratings
- Voltage 220/240 230/400 or 255/440
|
|
Micropump patented electromagnetic drives use rare earth magnets to increase motor torque capabilities while reducing total pump/drive package size. Surface mount technology improves reliability and enables higher efficiency motor performance. Variable speed electronic controllers offer thermal and overload protection with the option of a 0-5 VDC input signal, a 4-20 mA current loop, or a manually controlled drive. Closed-loop speed control allows for quick and easy setting of speed.
Performance Summary
- Speed range 500 to 6000 rpm
- Torque @3500 rpm to 106 mNm
- DC voltage 20 to 30 V
- Power @ nominal V 40 or 70 W
- Current input 1.8 to 3 A max
- DC speed control 0 to 5 V
-Tachometer Output 0 to 5 square
|
|
The valve is well suited for transferring and evacuating liquid, quantitative dispensing, and the flow range can be controlled.
Technical Features:
1. Uncontaminated flow.
2.Compact size.
3.Adjust flow range precisely.
|
|
The valve is well suited for transferring and evacuating liquid, quantitative dispensing, and the flow range can be controlled.
Technical Features:
1. Uncontaminated flow.
2.Compact size.
3.Adjust flow range precisely.
|
|
|
|
