|
|
| Kinney SDV Dry Screw suppliers of vacuum pumps operate without any sealing liquid in the pumping chamber. Without metal-to-metal contact inside the pumping chamber, wear is greatly reduced. |
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return cock, intake industrial filter, sound absorbers and ventilation/bleed system. An air blast industrial cooler is also available.
|
|
TWISTER VSB
Single-stage screw suppliers of vacuum pumps
- Dry running according to the screw principle
- Low running temperature due to the precision graduation of the screw pitch
- Easy to service
- Corrosion-resistant configuration by different coating versions
Range Technical Overview :
Capacity 80-500 m³/hr at 50 Hz and 100-650 m³/hr (59-383 cfm) at 60 Hz, Continuous vacuum upto 0.05 mbar (abs.) / 29.92 in.HgV
Possible Applications :
Process Technology |
|
KRAL pumps with magnetic coupling are hermetically tight, the pump station as well as the site itself stays clean. As magnetic couplings work without wear and maintenance-free, the life cycle costs are favourable comparative to conventional sealing systems.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Screw-clamp feed-through manufacturers of terminal blocks, CBC Series, polyamide insulating body, UL94V-0 flame behaviour, reduced overall dimension, cross-connections (PTC) by ?Easy bridge? patented system, with no need of additional protection.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715. |
|
Differents kinds and possibles uses:
- Single Level
- Multiple Connection
- Double Level
- Triple Level
- Distribution Blocks
- Micro
- Modular Panel Mount
- Single Level Industrial fuse
- Double Level Fuse
- Disconnect & Test
- Manufacturers of thermocouple
- Earthing
- Neutral/Earth Clamp specifications
- Corrosive/Explosive Env.
|
|
Optimum contact ensured through the patented and renowned clamping yoke system which is based on the classical increase of force of the screw. Requring only small effort, the screw thread produces high contact power.
A high contact force is only effective when continuously excerted on the conductor. The Weidmüller clamping yoke system works as follows: When the clamping screw is tightened, the resultant force causes the upper thread overlap to spring open, thus causing a locking action to be exerted on the screw. Movement of the connected conductor is compensated by the elastic behaviour of the clamping yoke.
Result:
The connection is vibration-resistant and makes retightening of the clamping screw unnecessary. |
|
Pressfit Power Professional taps with Screw Mount and Angled Slip-on Terminals
10 pin
Pressfit Power Taps with Screw Mount Terminal
6 pin
10 pin
Solder Power Taps with Screw Mount Terminal
6 pin
10 pin
|
|
The screw connectors supplier are intended for stranded and solid aluminium and copper cables, carrying low and medium voltages of up to 36 kV. The range covers cross-sectional areas of 6-630 mm² for round cable and 25-300 mm² for sector cable.
Connection to the conductors is achieved by tightening the screws in the through connector or terminal to a predetermined torque. Tightening takes place into a partially threaded nut. The tightening torque is correct when the screw breaks at its notch. It does this thanks to an innovative double-ended shear-off screw, as shown in the illustration |
|
Flexible lacing with self tapping screws:
- No drilling preparation, no template
- The screws professional drill themselves through the belt
- Good compatibility with scrapers
- Very long life time.
- Installation regardless of weather conditions
- Usable for an emergency splice of a steel cord belt
Material:
Reinforced rubber corresponding to conveyor manufacturers quality: wear resistant, heat resistant, oil resistant, fire resistant, white FDA, textile on the bottom and non magnetic.
Installation:
By using an electric screw driver, a hand brace or a pneumatic screw driver.
Packaging:
In length up to 3 m in one piece or on roll up to 25 m long. |
|
Professional fasteners with self tap screws:
- No drilling preparation, no template
- The screws professional drill themselves trough the professional belt
- Clamping effect of the plates against the belt
Material:
Fastener made of galvanized steel or non magnetic stainless steel.
Installation:
By using an electric screw driver or a pneumatic screw driver or a hand brace (for underground mines).
Packaging:
In pieces made for the requested belt width up to 3,000 mm in one piece.
The screws are provided in a plastic professional bag. |
|
Our range includes:
- Euro Bolts suppliers
- Ref 70
- Hawk Fang Bolts
- Easifit
- Large Oval Washers,... |
|
| Find all bolts necessary to use with industrial elevator bucket : screw, curved washers, flat washers, nuts, large oval washers underlt the head of the TF bolt, space washer. |
|
| Ball transfer units provide instant directional change and are manufactured to meet the highest standards of performance in load transfer applications |
|
| ... products without technical information |
| |
The main features:
- modular conception of screws and barrels
- easy and low-cost adaptation of the system
configuratio to the individual processing task
- throughputs up to 60 kg/h
- applications from material development up to small-scale production of profiles |
|
| ... products without technical information |
| |
|
|
see the results for the following category
