|
|
The UV series vacuum pumps, complying with international regulations, are valued in many industrial applications thanks to their low life cycle cost, safety, environmental compliance, low noise level, compactness, high performances, design simplicity, reliability and durability.
Some applications are: metal can production, electronics, food processing, food packaging, glass containers moulding, plastic / rubber, polymers production, EPS, drying processes, thermoformning, printing and paper etc.
|
|
|
Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan for cooling. UVD vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar.
|
|
|
The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application.
|
|
SA.3 - SA.3TV
Oil free vane vacuum pumps
Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.
Mainly built with light-weight alloys, they can be fitted where there is limited space, provided there is good ventilation. Perfect leak tighteness is achieved by Model TV thanks to the special design combined with FKM gaskets.
Standard equipment includes:
Silencer at the exhaust (SA.3)
Thermal protector (130°C) (1~only)
Model SA.3 is suitable for use as a compressor; see technical features and accessories on page 26 and 31.
|
|
ILMVAC has been developing and producing rotary vane pumps for 60 years. The superior material selection and optimised design ensures the best performance and reliability. The result is a professional solution for research and industry.
Advantages of the ILMVAC rotary vane pumps for the users:
- high water vapor tolerance for chemical applications
- compact, robust and functional construction
- low noise emission
- no oil contamination of the chamber by migration or suck-back
- high pumping speed
- free of non- ferrous metals
- low, ultimate pressures is reached quickly
- direct drive with elastic coupling
- long service intervals
- low energy consumption
- easy reassembly when servicing
- permanent operation possible
- attach simply and switch on
|
|
The S 1.5 is a single-stage, oil-sealed rotary vane pump with a gas ballast valve. It is driven by a flange mounted AC motor. The shaft of the pump and the shaft of the motor are linked by means of a pinned coupling.
Advantages to the User
Very small and light-weight
Low ultimate pressure
High water vapor tolerance
Low noise operation
Simple to connect
Easy to maintain and use
Typical Applications
In all areas of vacuum engineering where a low intake pressure is required
Evacuation of refrigerant circuits
For suction, lifting, emptying, filling and tensioning
For installation in mobile instruments
Supplied Equipment
DN 16 small flange connection on the intake side
Centering ring and clamping ring
Exhaust port designed as a DN 6 hose nozzle
Carrying handle
Built-in ON/OFF switch and overcurrent circuit breaker
Oil filling
|
|
Thanks to the high quality of material and components and to the technology of construction, the single stage UVL vacuum pumps achieve one of the best vacuum degrees attained by similar units available on the market.
UVL vacuum pumps are suitable for evacuation of small closed systems or for continuous suction within a pressure rate from 200 to 2 mbar (up to UVL18), from 400 to 0,5 mbar (from UVL25), from 400 to 10 mbar (RA version).
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
The proper use for rotary vane pumps XS is in the 1 mbar to 10-3 mbar range. VACUUBRAND oil sealed rotary vane vacuum pumps are high performance, direct drive vacuum pumps of one stage (RE) or two stage type (RZ). With small dimensions and various direct mounted accessories such as separators, full-flow oil filters with maintenance indicator and oil mist filters they are all-rounders in fine vacuum generation. Especially for applications in chemistry laboratories, they offer a high vapour capacity for water and solvents and an active corrosion protection through an oil shut-off circuit, keeping the module under vacuum and stopping corrosives from entering the pump during non-operation.
high conductance inlet
high pumping speed even at low vacuum
high vapour tolerance
for water and solvents through gas ballast about to 10% of pumping capacity. Quieter running and good ultimate vacuum even with gas ballast.
anti-corrosion design
important inner surfaces mechanically ground and plasma treated. Oil shut-off device against corrosive gases entering the pump whilst switched off.
new lubrication circuit and large oil volume
for quiet operation and longer service intervals
compact design
smaller dimensions, low weight, ease of maintenance through telescopic design
|
|
Simplicity of design with only one shaft and direct drive produces robust, long-lasting pressure/vacuum generators compressors with low maintenance and running costs. These pressure/vacuum generators operate completely oil-free; the individual chambers are separated by long-life vanes. Already featuring integrated intake filter and control valve, these pressure/vacuum generators can be fitted with other accessories without a problem. The blast air cooler, which is also integrated, guarantees a very low blast air temperature. The compact cover ensures low noise and heat emission. The combined pressure/vacuum generators are additionally equipped with a second intake. This provides the capability of making minor adjustments to the suction and pressure side as well as to high blast air volumes. By way of option, the second intake can also be used as a second low-vacuum suction air supply. Optional corrosion protection also makes these vacuum pumps suitable for extracting moist air.
|
|
Available in oilless or lubricated, motor-mounted or separate drive, Gast rotary vane compressors and vacuum pumps offer a wide choice of capabilities.
• Oilless or lubricated styles will accommodate a wide variety of pneumatic applications
• Self-lubricating, self-adjusting vanes on oilless models provide like-new efficiency throughout the service life of the pump
• Motor mounted or separate drive versions allow versatility in selecting the right pump for your application
• Miniature through larger size models offer an extensive performance range to satisfy most any need
|
|
From 2 to 100 m3/h (1.4 to 85 cfm) : THE BEST WAY TO MEET YOUR REQUIREMENTS
PASCAL series rotary vane pumps can meet the requirements of your specific application by offering a wide range of dedicated series :
• I series
Analytical instrumentation
• SD series
Standard non-corrosive
• C1 series
High resistance to corrosion
• C2 series
Most corrosive/Semiconductor
• H1 series
Hermetic, high tightness level
|
|
|
This new series has been studied to face different versions requests coming from the European Market and to allow different mounting possibilities. The STAR series is composed of 3 models (STAR 60, STAR 72 and STAR 84) with capacities from 10680 lt/min. to 14420 lt/min. It is supplied as series with the force feed lubrication, side outlets manifold with 1 revolving elbow, rear cast-iron oil tank (/...V version) or side sheet oil tank (/...F version) to allow the application where the space is restricted or to the more convenient place in the installation. The STAR series may be supplied, on request, with different kinds of fittings which may help the installation and/or the use of the pumps same. Every model of this series is available in versions /M with overdrive, /P for pulley application, /D direct drive, /H for hydraulic transmission and /K for hydraulic pump application.
|
|
Rotary vane vacuum pumps, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
Rotary vane pumps, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
|
|
MACRO VTB
Dry running rotary vane vacuum pumps
- Bearings on both sides of the rotor
- Paper inlet filter and exhaust silencer
- Flange motor with bolt coupling
Range Technical Overview :
Capacity 170-350 m³/hr at 50 Hz and 200-410 m³/hr (118-241 cfm) at 60 Hz, Continuous vacuum 200 mbar (abs.) / 24.0 in.HgV
Possible Applications :
Printing and Paper Handling, Food packaging/ Processing, Non-Food packaging, Environmental Technology, Woodworking, Medical Technology
|
|
DRY
Tough, compact construction
Minimum maintenance
Excellent heat dissipation
Capacity from 2 to 25 m3/h
Maximum vacuum level 700 mmHg (92% vacuum)
DRIP-FEED LUBRICATION
Minimum oil dispersion
Low noise and vibration free
Capacity from 2 to 150 m3/h
Maximum vacuum level 720 mmHg (95% vacuum)
Available with total loss lubrication, for all applications in which the intake air contains a high percentage of harmful liquids or gasses
OIL BATH LUBRICATION
Oil bath lubrication combined with a new design release reservoir that ensures silent operation and the complete removal of oil spray
Capacity from 20 to 300 m3/h
Maximum vacuum level 759 mmHg (99% vacuum)
|
|
The compact size combined with low ultimate pressure (abs.) attainable are the main features of this series. An effective damping and recovery system integral in the oil box eliminates oil vapours at the exhaust.
Additionally an automatic valve both isolates the system and at the same time prevents oil suck back should the pump stop under vacuum. The intake can also be oriented by the user, thanks to a special fitting. This series is suitable for evacuation of small closed system or for a continuous operation within a pressure range from 400 to 2 mbar (abs.) for the LA. 12, from 200 to 2 mbar (abs.) for the LB.6 and LB.8. Standard supply includes:
- Exhaust mist eliminator -Gas Ballast (LA. 12)
- Antisuckback valve
- Pack of BV 32 oil
|
|
VACUUM PUMPS with rotary pallets, load factor of 100%, with lubrication forced by oil injection in closed circuit.
Standard equipment: Radiator of oversize cooling, direct drive by engine IP 55 and elastic joining, non-return valve with the aspiration, ballast of air, filters separating aerosol of high effectiveness.
- Flow: 5 to 1000 m3/h,
- Max. Vacuum: 0,5 mbar ABS,
- Engine: 0,13 kw to 22 kw.
|
|
| ... products without technical information |
| |
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFE Bracket WCB
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Technical Data : Flow Rates up to a 15m3/h Total delivery heads up to 70m Temperature Ratings up to 90°C Pressure rating up to PN 10
Construction
Horizontal plastic peripheral Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFE Bracket WCB
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Technical Data : Flow Rates up to a 15m3/h Total delivery heads up to 70m Temperature Ratings up to 90°C Pressure rating up to PN 10
Construction
Horizontal plastic peripheral Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
SINGLE VANE PUMPS
FOR PRESSURES UPTO 320 BAR (4650 psi) AND
SPEEDS UPTO 3600 RPM
DISPLACEMENTS-6.5 TO 270 CC (0.40 TO 16.40 cu.in)
|
|
UnoLine single-stage, oil-sealed rotary vane pumps generate a vacuum with a pumping speed of 2.5 to 630 m3/h and a final pressure down to 0.3 mbar.
They are all-purpose pumps for many areas of industry and research. They can be used as a stand-alone pump or as a backing pump integrated into pumping stations. For example, as a backing pump for turbopumps in high vacuum applications or for Roots pumps with high pumping speed in the medium vacuum range down to 10-3 mbar.
The pumps work even under the toughest conditions, such as with high levels of dust, grime or fluids, high output pressures and in cycling operation.
Oil mist filters, oil return and safety valves are standard equipment. Not only do they prevent contamination of the surrounding air, they also protect the pump and the system. A gas ballast valve enables water vapor and other process fumes to be pumped off.
|
|
|
|