|
|
J+J are first to market in their class with the new J3 Series IP65 weatherproof reversible part-turn electric actuators, introducing an LED light in the cover to provide continuous visible actuator status information, and with different flash sequences, provides simple and instant fault diagnosis. Also a first, is the function conversion kits which retro-fit to covert on-off function to either failsafe or modulating, or both.
The features compliment the retained functionality from the J2 Series actuators including multi-voltage capability and electronic torque limiting with auto gear relaxing, which were firsts in 2003 when the J2 was launched
|
|
KZCO's heavy duty actuator, the EH5, has an operating range of up to 500 in-lbs. Use the EH5 on KZValves that include stainless steel and butterfly valves ranging in size from 1.5" through 6".
FEATURES:
- High quality, durable actuator housing rated:
NEMA 6P - Waterproof tested
NEMA 7D - Ignition Protection tested
- Wiring options include on/off, flow control, pot feedback and 4~20mA
- 12/24 VDC and 24 VAC compatible
- RoHS compliant solid state programmable circuitry
- Up to 500 in-lbs torque
- Tough aluminum gear box with metal gears
- Waterproof plug connectors
- Many different functionality variations
- NFPA 1901 compliant for fire industry use
- Private labeling available
- Customization available for your specific application!
|
|
"EH2" Medium Torque Actuator - Recommended for KZValves 3/4" to 3".
FEATURES:
- High quality, durable actuator housing rated:
NEMA 6P - Waterproof tested
NEMA 7D - Ignition Protection tested
- 12/24 VDC and 24 VAC operation available
- Available cycle times - .5 seconds to 8 seconds
- Hundreds of wiring combinations available
- Many different functionality variations
- 60 to 275 in-lbs torque
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Mountable at any angle
- 110V operation with AC adapter
- Private labeling available
- Customization available for your specific application!
|
|
"EH3" Compact, Low Torque Actuator - Recommended for KZValves 1/4" to 1".
FEATURES:
- High quality, durable actuator housing rated:
NEMA 6P - Waterproof tested
NEMA 7D - Ignition Protection tested
- 12/24 VDC and 24 VAC operation available
- Available cycle times - .8 to 12 seconds
- Hundreds of wiring combinations available
- Recommended for KZValves 1/4" to 1" valves
- 35 to 65 in-lbs torque
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof connector plugs
- Mountable at any angle
- 110V operation with AC adaptor
- Private labeling available
- Customization available for your specific application!
|
|
|
|
|
|
Top Line TE Series electric actuators provide unsurpassed quality, reliability and value to your automated system.
Some of the key standard features and benefits of the TE Series actuators are:
Multiple voltages available : 24VAC, 24VDC, and 115VAC single phase to fit your process needs
Nema 4, 4X & IP67 lightweight polyester powder coated aluminum housing
External manual override so you wont need to worry in a power failure
Four limit switches two for operation / two auxiliary dry contacts
Anti-condensation space heater for reduced downtime and increased reliability
Visual position indicator for your convenience
Captive cover bolts for your convenience
Optional Features:
Integral modulating card for full PLC control
Position Indication (Potentiometer) for continuous position monitoring
Advantages:
Multiple voltages available : 24VAC, 24VDC, and 115VAC single phase to fit your process needs
Nema 4, 4X & IP67 lightweight polyester powder coated aluminum housing
External manual override so you wont need to worry in a power failure
Four limit switches two for operation / two auxiliary dry contacts
Anti-condensation space heater for reduced downtime and increased reliability
Visual position indicator for your convenience
Captive cover bolts for your convenience
|
|
|
Electro-hydraulic valve actuators for positional, modulating and stepping control of globe, choke, plug, gate, ball, and butterfly valves, for hazardous areas and severe environments, these can be self contained with their own power packs and tank systems or be fitted into an existing hydraulic ring main circuit.
|
|
|
|
|
|
Actuators (90 quarter turn actuators) for ball valves and butterfly valves, explosion proof
Electrical, explosion proof quarter turn actuators series ExMax and RedMax, for ball valves, butterfly valves and mixing valves, from 5 Nm to 100 Nm, in acc. with ATEX 94/9/EC for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC multivoltage supply, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected. Robust aluminium housing with IP 66 protection, optional stainless steel version, integrated heater for use from -40C to +40C/+50C, cable connection, approx. 1 m cable, manual override, squared shaft connection 12 12 mm (size S) and 16 16 mm (size M). Series ExMax-... for use in zone 1, 2, 21 and 22. Series RedMax-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. Adaptations for all typical quarter turn valves available.
|
|
Honeywells HercuLine 2000 series actuators are low-torque (50 to 400 lb-in), precision electric actuators incorporating all of the easy-to-use, high-quality and reliable features of traditional HercuLine actuators, ensuring processes operate at maximum efficiency with minimal downtime and lowest lifetime cost. They are industrial rated and engineered for very precise positioning of dampers and valves. They perform especially well in extremely demanding environments requiring continuous duty, high reliability and low maintenance.
HercuLine 2000 series actuators incorporate all of the high quality and reliable features of the traditional HercuLine actuators with the added benefits of a microprocessor-based Enhanced Electronics Unit (EEU). These benefits make it easier to set up and maintain the actuator and allows the customer to monitor the health of the actuator for proactive maintenance planning
|
|
Explosion-proof multi-turn actuator MO 5-Ex
Technical data
Max. load torque: 600 [Nm]
Switching-off torque: 250 to 1000 [Nm]
Operating speed: 15 to 100 [min-1]
Number of revolutions: 1 to 150
Ambient temperature: -20 to +55 [C]
Protection enclosure: IP 55
Operating position: the motor axis should be in horizontal position
Weight: 110 to 130 [kg]
Standard equipment
# 3x400 [V] AC - Terminal board connection
# 2 torque switches
# 2 position switches
# 2 additional position switches
# Space heater with thermal switch
# Flange mechanical connection
# Mechanical position indicator
# Manual control
# switching-off from torque blocking
|
|
Explosion-proof part-turn electric actuator SP 2-Ex
Technical data
Max. load torque: 125 [Nm]
Switching-off torque: 145 [Nm]
Operating time: 5 to 80 [s/90]
Operating angle: 60 to 360 []
Ambient temperature: -50 to +40 and -25 to +55 [C]
Protection enclosure: IP 54
Operating position: any position
Weight: 16 to 16,5 [kg]
Standard equipment
# Voltage 230 [V] AC
# Terminal board connection
# 2 torgue switches
# 2 position switches
# 2 additional position switches
# Space heater
# hermal switch
# Mechanical stop ends
# Connection with valve flanged ISO 5211
# Manual control
Additional equipment
# Voltage 3x400 [V] AC, 24 [V] AC, 24 [V] DC
# Position transmitter with the following type of signal:
* resistive 1x100 [], 1x2000 [], 2x100 [], 2x2000 []
* current from R/I converter 4 to 20 [mA] with/without power supply
* current (a capacitive transmitter) 4 to 20 [mA]
# Position controller 0/4 to 20 [mA], 0 to 10 [V]
# Version with stand
# Version with lever
# Pull-rod
|
|
-Explosion Proof rotary Actuators without spring return with torque from 10Nm up to 4500Nm
-For ball valves
-Power Supply from 24V AC up to 240V AC
-On-Off, 3 Point, Modulating
-Auxiliary switches
-Suitable for zone 1,21,2,22
-II 2GD EEx d IIC T6
-IP66
|
|
Electric ATEX explosion proof Oden P30 actuator for linear or turning control valve applications.
High precision through the Oden Gear System.
Fits most types of valves using ASAB standardised modules and assembly kits
Voltage 24 VDC
Analogue control 4-20 mA
Speed 400 mm/min
Linear Force up to 24 kN
Turning Torque up to 30 Nm (added gear up to 4500 Nm)
|
|
Valve actuators, explosion proof
Electrical, explosion proof linear motion actuators series ExRun, RedRun (NEW from I. quarter 2009) and ExVent, for valves and other linear motion armatures , from 500 N to 10.000 N, in acc. with ATEX 94/9/EC for installation in hazardous areas zone 1, 2, 21 and 22, for all kind of gas, vapours, mixtures and dust. Actuators with or without fail safe spring return function. 24 to 230 VAC/DC in acc. to type, 5 motor running times adjustable on site, on-off, 3-pos, 0...10 VDC, 4...20 mA mode, 100 % overload protected. Robust aluminium housing with IP 66 protection, integrated heater for use from -40C to +40C/+50C, integrated Ex-terminal box, manual override. Series ExVent and ExRun-... for use in zone 1, 2, 21 and 22. Series RedRun-... for use in zone 2 and 22. Optional accessories like external adaptable aux. switches, terminal boxes and mounting brackets available. Adaptations for all typical linear valves available.
|
|
type MO 3
Max. load torque: 120 [Nm]
Switching-off torque: 150 [Nm]
Operatings speed: 10 to 63 [min-1]
Number of revolutions: 1 to 380
Ambient temperature: -40 to 55 [C]
Protection enclosure: IP 55 (65)
Operating position: the motor axis should be in horizontal position
Weight: 26,5 to 29,5 [kg]
Standard equipment
Voltage 3x400 V AC
Terminal board connection
2 torgue switches
2 position switches
Space heater
Flange mechanical connection
Local position indicator
Manual control
Torque switches blocking in limit position
Additional equipment
Voltage 3x380 V AC
2 additional position switches
Position transmitter with the following type of signal:
- resistive 1x100 [ohm], 2x100 [ohm]
- current from R/I converter 4-20 [mA] with/without power supply
- current (a capacitive transmitter) 4-20 [mA]
Position controller 0/4 to 20 [mA], 0 to 10 [V]
Electric local control
Mechanical connection with connect adapter
|
|
IMPACT 2000 is a high integrity modular pneumatic actuator controlassembly in 316 Stainless Steel. Lighter, stronger and more compact than panel mounting. IMPACT 2000 offers a significant reduction in total installed cost in both CAPEX and OPEX over panel mounted assemblies.
The modular system does away with comple arrangements using panels, pipes and additional fittings. Using a range of field proven components, valves, spool, poppet or direct acting, and filter regulators are connected in series using a universally compatible interface block and mounted directly onto the valve actuator.
|
|
Series 700 actuators are pneumatic diaphragm operators that offer spring return in either direct or reverse acting styles, offering fail-open and fail-closed modes respectively.
The actuators may be fitted with a variety of springs in order to overcome the wide range of forces that may exist on a valve plug. An adjusting mechanism is incorporated into the actuator design to allow for adjustment of the spring pre-compression.
The series 700 actuator is available in 60, 100 and 160 square inches of effective diaphragm area and may accommodate up to five inches of travel.
|
|
Double acting actuors PETRAS
Double acting pneumatic actuators up to 10 000 Nm at 5 barg supply pressure.
rotation : 90 - 120 -180 - 240
Materials
- high grade aluminium
- cast iron
- carbon steel
- stainless steel
Hydraulic version available up to 200 barg supply pressure
Established in 1966, PETRAS is a pioneer in the design and manufacture of high performance pneumatic and hydraulic actuators for quarter turn valves.
|
|
Smart quarter-turn actuator with the torque 50Nm to 1000Nm.
AVAR adopts liquid crystal display system with Chinese or English available indicating valve position,real time torque,working status, local/remote operation, error alarm etc.
|
|
RUGGED, LOW COST electric actuators FOR ROTARY VALVES
Thre on-of models wit h 100, 300 or 600 lb-in Output torque
wATERprof (nema 4, 4x, ip 65) Bray Controls' generations
of innovative electric actuators have a proven record of success.
Building on this record, Bray has combined
engineering expertise and years of field experience
to produce the R5. This red, rectangular electric
actuator for rotary valves delivers highly reliable
service at a reduced price.
The R5 meets the needs of 21st Century industrial applications
at a price that is unmatched.
|
|
* NIBCO Series 100 quality line of electric actuators are designed for quarter-turn applications - ball, butterfly and plug valves; dampers; vents and similar uses
* The 100 Series actuators offer compactness and a rugged design in a small package.
* Permanently lubricated gear train - Stainless steel output drive - enclosures are CSA certified to NEMA 1, 2, 3, 3R, 4, 4X and 5
|
|
Part-turn Actuator AVAT/AVATM01 - AVATM06 are installed on the automation of ball valves and butterfly valves.
Part-turn Actuator AVAT/AVATM01 - AVATM06 can be combined with lever if it is required.
Part-turn Actuator AVAT01 - AVAT06 torque range is from 125Nm to 2000Nm (90ft-lbf to 1475ft-lbf)
Voltage Supply: 220Vac ~ 460Vac, 50Hz/60Hz, single or three phase.
Enclosure Protection: IP68, Double-seated structure.
Isolation: Class F, Class H (optional)
Optional Function:
Modulating I/O signal 4-20mA
Explosion Proof
Fieldbus System: Modbus, Profibus, etc.
|
|
Electric Oden P30R3, P50R, P220R and P500R control valve actuators for rotary applications.
High precision through the Oden Gear System.
Fits most types of valves using ASAB standardised turning modules and assembly kits
Voltage 24 VDC.
Analogue control 4-20 mA or digital.
Torque up to 400Nm.
|
|
RACO's turn and part-turn valve actuator is a completely electromechanical final control element for operating fittings, valves and flaps, etc. with rotational movement ranging from less than 1 revolution to several revolutions.
The DM IV is assembled from components of the same proven building block system from RACO's electric actuators. This allows us to offer every customer the special turn and part-turn valve actuator for his needs at a low price.
The DM IV consists of the gear, motor and accessories.
|
|
Electric Actuator Type EA11
The EA11 is our basic version for the open-close operation of smaller torques. The electric actuator EA11 consists of a gear, a direct current motor, a base print as well as equipment for end stops in its standard version.
Electric Actuator Type EA21/31/42
The electric actuators EA21, EA31 and EA42 are not only excellent equipped but can make their point with very high torques. Therefore these actuators can be used to actuate a wide range of valves.
|
|
EAU Series
For use with Ball Valves up to 2"
Series EVR
For use with all sizes of Ball Valves and Butterfly Valves up to 4"
Series EJM
For use with all sizes of Ball Valves and Butterfly Valves up to 24"
Series EVS / EVT
For use with all sizes of Ball Valves and Butterfly Valves up to 12"
|
|
Schneider Electric Motion actuators position flaps, valves or sliders with great precision. The compact actuator housing contains a motor, a gearbox and a control unit. Three different types of actuators are available to respond to your specific positioning challenge:
STE = electronic actuator
STA = actuator with cams and relais
STM = actuator with cams
|
|
Greatork Electric intelligent valve actuator
Main Type: Quarter-turn, Part-turn, Linear
Greatork Actuators are widely used in the industries of valve, oil field, water treatment, waste water process and power plant etc..
Actuator design features:
Torque range from 50 Nm to 3000 Nm
Output speeds from 18 to 72 rpm
Limit and torque seating
Output drive types according to ISO standard
Available with 3-ph AC, 1-ph AC iother power supply such as 440V,110V,480V,etc..
Some advantages of our actuator:
1.SOC ( system on a chip)
2.Non-intrusive design
3. LCD display and Local Control
4. Emergency Shut Down (ESD)
5. Infrared Setting & Control Technologies
6. Safety Protection
7.Error Detect & Alarm Function
|
|
Electromechanical actuators for a simple and reliable control of the valve.
400 Series for non-rising stem applications.
401 Series for rising stem applications (output with or without axial thrust).
Main characteristics:
Torque range from 10 Nm to 12.000 Nm.
Output speeds from 2,75 to 224 rpm.
Torque and position setting.
Output flanges and bushes according to ISO 5210.
Handwheel for manual operation.
High degree of weatherproof protection IP67 (IP68 optional). High quality corrosion protection.
Wide range of switching and signalling options.
|
|
90 Degree Electric actuator with torques from 200 in. lb. to 1000 in. lb. NEMA 4 and 4X CSA listed.
|
|
|
|
|
|
SAFIs series SM includes two models of corrosion resistant, robust and versatile electric actuators, with ISO
mounting plates, to be used with ball valves and butterfly valves. The fully sealed casings are made of
polyethylene or glass reinforced polypropylene for anti-corrosion protection. Continuous torques of 30N.m
can be delivered with a service ration of 30%. The slewing angle can be adjusted to 330, and high slewing
speeds can be provided (0.5 seconds for a turn).
Series CB compact electric ball valves combine an electric actuator Series SM1 with a ball valve built into the
motors glass reinforced polypropylene base plate, eliminating the need for mounting brackets and stem
couplings. This results in the most economic electric actuated ball valve on the market. It is available up to
DN40 (1). Fast operation times make it the ideal equipment for automatic dosing systems in fine chemicals,
electronics and photographic industries.
Supply voltage from 12V to 48V DC or AC, and 110V or 240V AC.
Torques up to 30 NM
Rotation speed up to 20 rpm
ISO 5211 F05 baseplate. Choice of female square spindle drives 11mm or 14mm
2 or 4 limit switches, heating resistor option and manual override are avaialble.
|
|
see the results for the following category : Screw jacks |
|
|