|
|
| ... products without technical information |
| |
The precise regulation of the air flow into sewage basins does not only influence the optimal quality of your cleaning process but furthermore still saves pure money because the energy-intensive compressed air is well applied in optimal quantities.
A too low oxygen supply leads to insufficient pollutant reduction and consequently to a reduced cleaning performance. In the worst case, an infringement of the desired limits occurs.
A too generous ventilation doesn’t bring any higher cleaning performance, but the energy costs for useless compressor performance can impair your installation effectiveness quite considerably.
Deltafit secures optimum oxygen input to your prozess, saves pure energy costs, works also under heaviest conditions for years without any maintenance – and fault-free. The optimally adapted components are prooving their precision and reliability in thousands of industrial installations in the entire process industry. The ready-to-go-setup components are ready mounted and do not need any startup efforts after installation!
Fluids: Air for sewage basins or combustion air in process industries
Pipe diameters: 65..500 mm (2,5”-20”) (others on request)
Process conditions: -40..250 °C (others on request)
0..10 bar (others on request)
Ultrapure to higly inpure air
|
|
Fluids: Gas, Steam, Liquids
Diameters of pipes/ channels:
0..20 mm deltaflow DF8
15..100mm deltaflow DF10M
65..3000mm deltaflow DF25
500..15000mm deltaflow DF50
Operating conditions:
-250..1240 °C
0..800 bar
Pure to extremely contaminated, aggressive media
Eexia
TRD
The deltaflow flometer is continiously developed and inprooved and we hold several patents on the deltaflow Technology. But we do not only rely on our own know-how %u2013 systec is furthermore co-operating with well known partners sich as the institute for flow mechanics of the University of Erlangen oder the PtB in Braunschweig.
Due to the special probe profile the deltaflow can assure a high level of precision and excellent process viability, even in extreme conditions causing the lowest residual pressure loss. The deltaflow has been installed several thousand times.
Typical Applications are flow measurement of steam, perssurized air, water, liquids, stack gas, flare gas, natural gas.
Typical industries where our deltaflow integrating pitot tubes are used are Power Plants, Chemistry, Petrochemistry, Gas- and Oil Exploration, waste water plants.
The program to size and design the deltaflow is very self-explanatory and you can download it for free from our web-page as a Windows file (Windows 9x, 2000 and NT).
You can find more details in the referring information sheets. At the bottom of this page you can find links to the information sheets and to the software
|
|
The deltaflow flometer is continiously developed and inprooved and we hold several patents on the deltaflow Technology. But we do not only rely on our own know-how – systec is furthermore co-operating with well known partners sich as the institute for flow mechanics of the University of Erlangen oder the PtB in Braunschweig.
Due to the special probe profile the deltaflow can assure a high level of precision and excellent process viability, even in extreme conditions causing the lowest residual pressure loss. The deltaflow has been installed several thousand times.
Typical Applications are flow measurement of steam, perssurized air, water, liquids, stack gas, flare gas, natural gas.
Typical industries where our deltaflow integrating pitot tubes are used are Power Plants, Chemistry, Petrochemistry, Gas- and Oil Exploration, waste water plants.
The program to size and design the deltaflow is very self-explanatory and you can download it for free from our web-page as a Windows file (Windows 9x, 2000 and NT).
You can find more details in the referring information sheets. At the bottom of this page you can find links to the information sheets and to the software
|
|
LSP 1 - air-flushing system for dust laden gases
Used together with dp primaray elements such as orifice, venturi or pitot tubes, LSP1 permits the measurement of extremely dusty gases.
Connected to a dp-Primary element and the dp-transmitter, the LSP1 cleans the dp-channels of the promary element efficiently from dust, dirt and condensation.
The LSP1 has been developed and tested in close co-operation with leading power plant operators and is also used successfully for security installations and cut-off installations.
Applications
Primary, secondary and recycled air-volume-measurement, measurement of waste-gas volume in the chemical industry, power plants and incineration plants.
Dusty return air from the production
A ir containing cement
Blast furnace gas, coke-gas, throat-gas
Maintenance intensive primary cells like venturis, orifices, nozzles can be equipped subsequently
|
|
Flow measurement equipment :
By combining Furness Controls' Laminar Flow Elements with the ability to measure low differential pressures, accurate measurement of flows from as low as 0.01cc/m to over 20,000 l/m can be achieved with very low insertion loss.
|
|
The deltaflow flometer is continiously developed and inprooved and we hold several patents on the deltaflow Technology. But we do not only rely on our own know-how – systec is furthermore co-operating with well known partners sich as the institute for flow mechanics of the University of Erlangen oder the PtB in Braunschweig.
Due to the special probe profile the deltaflow can assure a high level of precision and excellent process viability, even in extreme conditions causing the lowest residual pressure loss. The deltaflow has been installed several thousand times.
Typical Applications are flow measurement of steam, perssurized air, water, liquids, stack gas, flare gas, natural gas.
Typical industries where our deltaflow integrating pitot tubes are used are Power Plants, Chemistry, Petrochemistry, Gas- and Oil Exploration, waste water plants.
The program to size and design the deltaflow is very self-explanatory and you can download it for free from our web-page as a Windows file (Windows 9x, 2000 and NT).
You can find more details in the referring information sheets. At the bottom of this page you can find links to the information sheets and to the software
|
|
High Pressure Valves and System Accessories
Haskel International offers a wide range of high pressure valves and system accessories designed to assist in the controlled use of pressure and flow-generating equipment manufactured by Haskel and others. Continuous investment in the new machinery and technology keeps Haskel at the forefront of the field. Our selection of components includes:
Air Pilot Switches
Air Pilot Switches Selection Charts
Air Operated Directional Control & Release Valves
Air Piloted Valves Typical Application
Air Piloted Valves Selection Charts
Regulating Relief Valves
Stainless Steel Check Valves
Hydraulic Accumulators & Gas Receivers
Filters
Plenum Chambers
6,000 psi Gas Storage Cylinder
High Pressure Valves, Fittings & Tubing
Port Adapters
|
|
|
SchuF manufactures specialised Contol Valves for the Chemical, Petrochemical, Oil, Refining, Mining and Power industries. Our control valves range from multistage angle to multiport diverter valves. They include high pressure, high temperture let down valves, boiler, feed and start up valves, disc and piston drain valves with contoured discs and rams, distributor control valves, and bellows sealed valves.
|
|
|
Demand continues to mount for improved comfort conditioning combined with lower operating costs. New architectural designs have created real problems for contractors and engineers to maintain humidity control at reduced loads, and to control load variations. Refrigeration and air conditioning systems are usually designed to provide a given capacity at maximum conditions. These operate with little fluctuation throughout a narrow load range. However, only the larger size machines make any provisions for operation at reduced capacity. In some systems, integral cylinder unloading, the installation of a gas engine drive with variable speed control, or even multiple smaller systems, provide a logical solution.
|
|
Pressure valves
As screw-in cartridges or intermediate plate valves
Excellent pressure adjustment over the entire operating range
Pressure relief valves
Unloading valves
Pressure reducing valves
Proportional pressure relief valves
|
|
MODELS : VR1E02 (PANEL MOUNTED/SUB-PLATE)
VR4* (SUB-PLATE / THREADED/CARTRDIGE)
VR5* (FLANGE MOUNTED)
VVV01 (SOLENOID VENT VALVE)
SIZES - 1/4 " TO 1-1/2"
FUNCTIONS : REDUCING / RELIEF / SEQUENCE / UNLOADER
FLOWS : 1.7 - 159 gpm / 6.6 - 600 lpm
|
|
KOFLOC 6600/6800
The KOFLOC Pressure Regulating Valve MODEL 6600 SERIES is a compact, lightweight precision pressure regulator with superior repeatability to provide reliable and speedy regulations. MODEL 6600 SERIES is a non-bleed valve and has successfully been put to rigorous leak tests and is designed as a panel mount unit for easy assimilation into sensitive analytical equipment. Components are carefully cleaned before assembly, making this product ideal for used as a component of high-sensitivity instruments for analysis or other R&D activities. The MODEL 6800 SERIES is a type of check valve to obtain a constant level of pressure upstream of the valve. It makes it easier and speedier to control pressure in the tank with a large buffer, and siphoning, operations that were rather difficult with a secondary control valve commonly in use.
FEATURES
♦ Compact
♦ Low-cost
♦ Quick and easy control
♦ Clean, grease-less valve
♦ Leak-integrity
APPLICATIONS
♦ Tank-pressure control
♦ Gas mixing
♦ Research
♦ Analytical equipment
♦ General gas control
♦ Precision pressure control
|
|
Series PC (Pressure Compensated)
General Description
These valves are designed to regulate flow at a selected rate then maintain this flow constant within ?5% as inlet and outlet pressures may vary. However, changes in fluid temperature will prevent flow from holding constant.
There are 2 types of Series PC valves. Series PCM valves can be adjusted for required flows after being installed. Series PCK valves are factory-set for a specified flow and are not adjustable by the user
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The HPR module ensures the
regulation of high pressure in the
“common rail” diesel
injection systems.
The device is driven by a PC
through a RS485 serial link.
It is powered by a 115Vac or
230Vac 50/60 Hz supply and by
an 10 to 36V DC supply (battery
simulator) for actuators
command.
HPR
SYSTEM COMPOSITION
The module shows up as a 3U 19” rack.
The system is composed of :
• A CPU board that processes the information and performs the numerical
adjustment of the pressure
• A pressure sensor conditioning board :
Input signals : 0-5V or 0-32mA
Sensor supply output : +5V or +12Vdc
The actuator command boards supply can be external (connector on the
back plane) or internal (optional supply board).
It is possible to load up to 4 actuator driving boards in the same rack.
These boards allow different types of pressure regulation :
• asynchronous regulation on the rail
• output regulation of the high pressure pump
• input regulation of the high pressure pump and low pressure output
• input regulation of the low pressure pump.
Each board can drive 2 actuators (allowing to drive up to 8 actuators with
4 boards).
TYPICAL USE
The HPR is connected to the supervisor through a RS485 (MODBUS) link.
The exchanged informations are :
• pressure value set point
• type of used actuator : type 1 to 32
• regulator fault status
• time of pressure measure command
• connected sensors parameters (linearity and full scale).
• instant pressure measurement.
|
|
|
|
see the results for the following category
