Valves for the food industry

DN: 40 mm
Pressure: 0 bar - 0.2 bar
Temperature: 5 °C - 90 °C

... Cleaning and disinfecting systems in the dairy industry and process engineering Characteristics Direct acting Vacuum controlled optional PVDF or stainless steel valve body and ...

Temperature: 5 °C - 150 °C

... vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include ...

DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C

... aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves conform to the terms of ...

DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C

... continuous-action or 3-point (Open/Stop/Closed); integration in a process control system via 0/2-10 V or 0/4-20 mA signal; available in various sizes up to 25 kN Easy to service: The valve trim can be ...

DN: 0.5 in - 2.125 in
Pressure: 680, 700 psi
Temperature: -40 °F - 240 °F

Parker-Sporlan’s CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves ...

DN: 8 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 160 °C

Special features • - Consisting of aseptic angle valve and actuator • - USP VI diaphragm • - Plug stem guide with diaphragm seal and test connection • - Module A category according to Pressure Equipment Directive • ...

DN: 15, 20, 25, 38 mm
Pressure: 8 bar
Temperature: 175 °C

Compact pressure reducing valve for use on autoclaves, sterilizers, humidifiers, etc. in the pharmaceutical, medical, food and other industries. Direct-acting pressure reducing valve ...

DN: 25 mm - 500 mm
Pressure: 10 bar
Temperature: -40 °C - 150 °C

A resilient seated butterfly valve for general purpose applications The ideal valve for dry bulk conveying, food and beverage processing, corrosive slurries and paperstock.

DN: 80 mm - 300 mm
Temperature: -60 °C - 250 °C

Pipe slide gates, hand-operated Press formed, fully seam welded and complete with lipped ends, manually operated pipe regulator gates are designed for use with granular product within a vertical free fall Stainless steel: Silicone ...

DN: 25 mm - 80 mm
Pressure: 1 bar - 10 bar

Your benefits Hygienic Design: This ensures safe use especially in hygienically critical processes, e.g. in the food, beverage and pharmaceuticals industry. Safety: The double guided ...

These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution ...

DN: 0.5 in - 2 in

Series 83 on Type-21 Ball Valve (1/2"-2") Ideal Applications Include: Chemical Processing, Water & Wastewater, Landfills, Irrigation, Food Processing, Mining Specifications PVC ...

... applied for the following industries, ​Machine construction Metrology and control technology Pump and instrument construction Food industry ...

DN: 0.75 in
Pressure: 20, 40 psi
Temperature: 0 °F - 170 °F

... /4? System 20 PSI 1,140 gal/hour 3/4? System With Element Clamps 40 PSI 2,280 gal/hour Information regarding FDA (Federal Food and Drug Administration).

... performance butterfly valves are widely used in many industries including heating, ventilating and air conditioning, power generation, hydrocarbon processing, water and waste water treatment, marine and ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 22.7 bar

... particularly suit the process conditions - Valve disk with balancer: Reduces pressure surges when closing in the direction of flow The cone-shaped valve disk ensures a gentle ...

DN: 15 mm - 125 mm

Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges ...

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

DN: 6, 8 mm
Pressure: 20 psi - 30 psi

... Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts ...

DN: 15 mm - 300 mm
Pressure: 1 MPa - 4 MPa
Temperature: -46 °C - 600 °C

Four-way ball valves are used in oil, natural gas, coal and ore mining, refining processing and pipeline transportation systems; in chemical products, medicine and food production; in ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

... Visual Positioning Indicator (Standard) Electrical positioning indicator Propotional Flow Version Applications Food & Beverage Dairy Chemical and Environment technologies Water Treatment Sterilizers Water ...

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 40 mm - 600 mm

Concentric electric butterfly valve / soft seal with resilient seat/low torque design Features Soft seal butterfly valve  - Body type: wafer or lug  - Body material: Ductile iron, SS304(CF8), ...