|
|
|
Dedicated technical personnel around the world provide support to an extensive product portfolio. These products offer outstanding performance in formulations for the protective and decorative coatings industries. Our products strongly support applications such as wall paints, chemical resistant tank lining, flooring, coating on steel of ship and offshore structures as well as decorative exterior, hybrid systems and functional powders.
|
|
DURESIL EB : Bituminous epoxy paint for acid-resistant protection of concrete and steel surfaces. Use Duresil EB to coat structures that are below ground or to be permantly immersed in water, such as concrete and steel posts, sewers, purification plants etc. Duresil EB is a two-component paint formulated from special asphalt polymers and epoxy resins. To prepare, add Part B to Part A and mix thoroughly. Apply Duresil EB by brush or spray onto perfectly clean and solid substrates. After final hardening, Duresil EB forms a completely waterproof and vapourproof protective coating that is resistant to diluted acids and alkali, mineral oils, detergents, waste water, etc. Consumption 400-450 g/m2 per coat. Packaging 10 kg (A B).
MAPECOAT I24 : Epoxy paint for acid-resistant non-toxic coating of concrete surfaces. Mapecoat I24 is used to coat concrete surfaces designed for contact with food products e.g. wine, oil, confectionery industries, etc. Mapecoat I24 is especially recommended for coating reservoirs built to contain drinking water. Mapecoat I24 is a two-component epoxy paint. Prior to use the components must be thoroughly mixed until complete homogeneity is obtained. Characterized by a low viscosity Mapecoat I24 can be applied easily on perfectly clean, solid and dry substrates by brush, roller or spray. Once cross-linked, Mapecoat I24 forms a non-toxic protective coating that is waterproof and vapourproof. Coverage 400-600 g/m2 per coat depending on the type of substrate.Packaging 5 kg (A B).
|
|
HPA Conformal Coating
Ref: HPA
Resistant to mould growth
May be removed with solvents such as Ultrasolve (ULS)
UV trace for inspection
Excellent dielectric properties and with a wide temperature range
Approved to US MIL-1-46058C
China Military Approval GJB150 and GJB4 (Naval)
For professional use only
Acrylic Protective Lacquer
Ref: APL
Offers excellent adhesion to all substrates
UV trace for inspection
May be removed with solvents such as Ultrasolve (ULS)
Wide temperature range and good dielectric properties
May be soldered through, allowing for repair
For professional use only
|
|
3M™ Dust Control Spray
A paint booth protection product that attracts and traps dust and dirt. Creates a film that helps produce cleaner paint jobs. Liquid, applied with garden type sprayer. Spray applicator also available.
|
|
WEICON - Our name stands for high-quality products that have been used successfully in all areas of production, repair, maintenance, and servicing for many years.
Products that will certainly solve a number of tasks and problems in your company as well.
Constant further development and adaptation to the latest requirements from practice and environmental concerns also guarantee a quality standard that remains consistently high.
|
|
Current health and safety legislation requires property operators to provide clear demarcation lines for factory floors, pedestrian aisles and gangways. ROCOL has developed a comprehensive range of line marking and coding products.
The line marking range includes: Easyline®, a 'traffic-grade' epoxy aerosol line marking paint; line marking tapes; a water-based, low odour, solvent free line marking paint and Easyline® Instant, the world's only disposable line marking system, and Easyline® Paint Marker Pen.
The coding range offers: Contractor, a cost effective spot marking paint; EasysprayTM, a durable spot marking paint and Easyline® Temporary, a temporary spot marking paint.
|
|
|
JELT COLOR LAQUE paintings are acrylic type solvents paintings. They are conditioned in aerosols and designed for marking, decoration, completion and final improvements. They are applicable on all supports.
|
|
DYNA-PRO ALUMINUM PROFILE PAINT
PRODUCT DESCRIPTION:
Aluminum touch up spray.
Rapid drying, not affected by light.
Paint surface may be polished.
Standard aluminum profile colors available
Package: 150 ml
|
|
Aervoe offers the most complete line of inverted marking paints and coatings in the world. Choose from a wide range of application-specific aerosol and bulk marking products including paints, chalk, and specialty marking products such as our Fugitive Marking Paint. Aervoe Marking Paint has a higher paint solids level, which means a more durable mark, and more linear feet per 3/4" mark with one-coat coverage. All inverted aerosol cans are activated by hand with the patented Spray-Thru Cap, or may also be used with our assorted marking applicator products.
Colors match the American Public Works Association's (APWA) One-Call color standards.
Available in aerosol and bulk liquid form.
|
|
Our special wrinkle paints with their characteristic elegant aspect have been embellishing the most prestigious autos for over 25 years, they glitter on the fascinating Harley Davidson motorcycles, decorate the safes in hotel rooms and enhance the image of many objects in plastic.
Three lines of products:
RILOPLAST 50
The line for do-it-yourself and body shop, that reticulates at 50-60°C.
RILOPLAST 80
The industrial line, that reticulates at 80-100°C.
RILOSPRAY
The product line in spray cans.
Application: only by spray, with a normal, not an electrostatic spray device. Thickness may vary from 100 to 300 microns, depending on the esthetic requirements of the user: low thickness produces fine crinkling, high thickness produce a more marked crinkle effect.
Reticolation: 60 or 100°C, but for a minimum of at least 60 minutes; therefore only with static furnaces.
Material: plastic materials, wood, glass, metal.
Colors: any color on request.
|
|
Aervoe's high-performance Direct To Metal Rust Proofing Paint withstands corrosion and exposure from mild to moderate conditions while maintaining high gloss levels. Color selection includes OSHA safety and HVAC refrigerant colors.
The high gloss, high solids formula is ideal for equipment touch-up and OEM production applications indoors or outdoors. It is resistant to mild and moderate environments including intermittent exposure to water, and salt spray, moisture, and temperatures up to 300°F (149°C). May be applied directly over rust with minor surface preparation leaving a tough, protective coating that will not chip or peel. Not recommended for immersion
services.
Available in Water-Based and Solvent-Based formulas.
Aerosol and bulk liquid forms.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Flex-Lag® Weld-On Ceramic
Eliminate the belt vibration and cleaner chatter often caused by ordinary weld-on lagging by installing Flex-Lag® Weld-OnCeramic Pulley Lagging. It features a new gutterless design with easily installed over-lapping segments. So the wide gaps between strips of conventional weld-on lagging products are eliminated.
Flex-Lag® Ceramic
When conventional rubber lagging fails to correct belt slippage, the solution is Flex-Lag® Ceramic Tile Lagging. Our Ceramic Tile Lagging features the highest coefficient of friction available in lagging materials - two to three times the friction of rubber in wet, muddy or dry conditions.
|
|
Flexco makes it easy to find the pulley lagging you need to eliminate belt slippage, increase pulley life, improve water shedding, and boost productivity. Plus, these benefits are achieved without removing the pulley form your conveyor system! Flex-Lag® application requires only a time- and labor-saving cold vulcanization process. So it installs easily on-site.
Flex-Lag® Diamond-Pattern Rubber Lagging is a high-durometer rubber for abrasion resistance and water-shedding. Based on the design of treads used for rain tires, the diamond pattern splits the film of water and deflects it into lateral or diamond-shaped grooves - away from the pulleys. A high coefficient of friction, combined with exceptional water-shedding capabilities, helps keep belt slippage to the absolute minimum.
Flex-Lag® Plain-Pattern Lagging helps prevent belt slippage in the dirtiest environments. Rubber flexes during use, shedding excess material, preventing build-up, and preventing premature belt and pulley wear. Horizontal grooves between plain rubber strips trap and deflect water from the pulleys. This results in a coefficient of friction vastly superior to plain sheet-type lagging.
Flex-Lag® Light-Duty Lagging is ideal for compact pulleys and most light-duty applications. Specially designed for pulleys having diameters as small as 2" (50mm). Moisture is channeled between small raised buttons that support and grip the belt, delivering the extra traction to drive your belt.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
