|
|
GVR : Ventilation grille
Application :
ventilation of cereals, oil seeds : wheat, rape seed...
conservation of food products : potatoes, onions...
|
|
|
Aluminium honeycomb vent panels for EMC screening in a range of styles and sizes. Steel honeycomb vents are also available.
|
|
• HIGH LEVEL OF EMI/RFI SUPPRESSION COMBINED
TO PASSAGE OF AIR IN SHIELDED ENCLOSURES
• ALUMINIUM HONEYCOMB FOR HIGHEST AIRFLOW OF
ANY VENT MEDIUM (LOW STATIC PRESSURE DROP)
• ALUMINIUM WIRE SCREEN SANDWICHED BETWEEN
RIGID EXPANDED MESHES FOR DUST ARRESTING
(INLET COOLING PANELS)
• FURNISHED READY TO INSTALL WITH STANDARD
ALUMINIUM FRAME AND EMI SHIELDING GASKET
(fastener or thru-holes on the frame for fixing)
|
|
1. It is easy to exhaust heat of inside box to outside.
2. It is easy to install cooling pan inside the box.
3. It is designed to prevent the penetration of rain.
Item : V60, V80
|
|
Lightweight, compact, ducted filter module with lower pressure drop and lower life cycle cost
The Camfil Farr Megalam Terminal Diffuser module is ideal for applications where clean air is a requirement to protect products, people and the environment.
|
|
Description
Systemair TSO square perforated ceiling diffuser, with PER plenum box as an accessory. The TSO can be shielded with the SSO accessory.
Accessories
Ceiling plate (600x600) TPP
Shielding SSO
Plenum box PER with removable damper and test points
Function
The TSO is a supply and exhaust air diffuser designed for ceiling assembly. The TSO has a perforated front plate and a connection sleeve fitted with a rubber seal tested for airtightness. The TSO has high induction which allows a maximum air temperature difference of dT 10 K. The distribution pattern can be altered with the SSO shielding accessory to one-, two- or three-way distribution. The distribution unit is adjustable.
|
|
Mott GasShield POU Diffusers consist of an element - made from process-determined materials in micron grades from 100 down to our patented NanoMetal® media providing 9-log filtration - with user-specified hardware designed to allow controlled, non- disruptive filling of load lock and reactor chambers. The diffusers are carefully designed to maximize flow while minimizing pressure drop, which results in the desired, uniform diffusion of gas through the porous element into the chamber.
Packaging:
- Cleaned and packaged in Class 100 clean environment.
- Packaged with flow characteristics and intended use.
- Nylon 6 inner bag with clean outer bag, protectively packaged to ensure product quality.
|
|
SILAIR is a panel for electromagnetic protection and screening for ventilation, heating ducts, lighting apertures…
The metal honeycomb cells of SILAIR use the waveguide principle which provides excellent attenuation but a minimal loss of pressure.
It allows air to circulate while ensuring the electrical screening of the aperture.
The outer frame enables the SILAIR panel to be fixed to its support. In certain cases a conductive gasket is recommended between the frame and its support.
|
|
|
Leader Tech introduces its high performance EMI shielded air vent panels to its product range. Air vent panels are manufactured using aluminum, steel or brass and are available in various plating finishes and mounting configurations allowing for installation in most applications.
|
|
|
|
|
|
StreamShield™ Commercial EMI Vents
- available with fire barrier coatings
Low cost StreamShield vent panels provide high levels of EMI shielding in applications such as computer network and wireless infrastructure cabinets. These vent panels feature aluminum honeycomb within rolled aluminum frames. The result is a lightweight, high airflow solution for enclosures requiring both cooling and high levels (50 dB at 10 GHz) of shielding. An optional intumescent coating provides fire barrier properties. On exposure to flame or heat at 300°F (149°C) the coating expands rapidly to fill the honeycomb cells and prevent flame passage. Standard panels feature 1/8 inch (3.2 mm) honeycomb cells, 1/4 inch (6.4 mm) thick. Complete frame/honeycomb assemblies are chromate conversion coated.
SLIMVENT™ Thin Profile EMI Vents
Chomerics' SLIMVENT™ air ventilation panels provide 90 dB attenuation at 1 MHz to 50 dB at 10 GHz. The panels are made from expanded aluminum or monel (nickel-copper) foil, secured in an extruded aluminum frame only 0.187 inch (4.75 mm) thick. This narrow profile is ideal for accommodating critical space limitations at air intake and exhaust ports. The frame has an integral wire mesh gasket for EMI shielding at the mounting interface. SLIMVENT air panels are fabricated to customer specifications.
CHO-ITO™ - ITO Coated Conductive Windows
Chomerics offers a range of EMI shielded windows with ITO conductive coatings for use in EMI/RFI shielding applications. The combination of high visible light transmission, near neutral color and low electrical resistance make an ideal EMI/RFI shield for electronic displays requiring moderate shielding effectiveness and high quality optical properties. CHO-ITO™ is a cost effective alternative to a mesh laminated window.
WIN-SHIELD™ Shielded Windows and
Contrast Enhancement Filters
Chomerics WIN-SHIELD windows are performance-tested glass and plastic assemblies for displays requiring EMI radiation or susceptibility shielding. They provide highly effective EMI shielding and exceptional optical clarity. Windows can be produced in glass, plastic, or combinations of both. Shielding is provided by wire mesh or by deposited conductive coatings. Chomerics' prototype-to-production service includes an extensive line of spectrally matched filters to meet stringent contrast enhancement performance requirements for both flat and curved configurations.
|
|
ASD-150, ASD-200 Stainless Steel Ventilator
304 Stainless Steel
Dimensions: 150 X 40 mm, 200 X 50 mm
1.5 mm diameter holes
Application: Various
Finish: Satin (Stainless Steel)
Please visit our website for further information about this and other similar products.
|
|
ECOJET® is suitable for perforation-type integration into existing ceilings. The air diffuser supports air management when cooker extraction hoods are used. The flowing-in fresh air can penetrate down to the floor region of the kitchen.
The air diffuser consists of a box-type housing made of stainless steel and a lateral socket with adjusting unit. The housing is fitted with suspension lugs for the fastening of the device to the existing ceiling.
The edges of the bottom face of the galvanized steel sheet housing are designed to support suspended ceilings (e.g. plasterboards). Two perforated metal sheet levels (hole pattern Rv 3.5-5) ensure the draught-free inflow of fresh air. The lower perforated metal sheet panels can be removed for adjusting work. The exposed perforated metal sheet panel is available in the following material and colour versions:
|
|
What differentiates ATI-Circular EMI Vents from other conventional panels is the shape.
Billets, rods, bar and plate stock are fabricated into rigid frames for structural support.
Core materials of honeycomb in assorted thickness and cell size, 3-layer screen, multi-layered screen, rigid grill and combinations may be selected for circular vent assemblies. EMI gaskets and environmental seals can be applied. Plating options enhance shielding effectiveness. Through hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. ATI Circular Vent Panels are designed for a precise fit of round openings on mounting walls or enclosures. Circular Vents are ideal in applications where a conventional rectangular vent may impede mounting space. Alco's special circular vent process can be fabricated in ATI 90° Cell, ATI-Dual Stack or ATI 3-Layer designs.
|
|
|
ATI Dual Stack Ventilation panel is a high level EMI shielded air filter with superior performance. Extruded aluminum profiles surround dual layers of ¼-inch honeycomb and welded in place. Both honeycomb layers are positioned 90 degrees to each other, optimizing shielding effectiveness and minimizing the polarization characteristics of straight aluminum honeycomb. Alco-Multi Gasket, a combination of neoprene sponge and monel mesh or Alco-Knit, is installed on the panel. Hole locations are customized for easy surface mount installation with standard 8-32 rivnuts or .203 diameter holes. Plating options enhance shielding effectiveness.
|
|
|
ATI's brass and steel honeycomb vent panels are recommended when structural integrity, H-Field shielding effectiveness, harsh environmental conditions and durability are primary concerns. Brass or steel extrusions are customized to surround brass or steel honeycomb and welded in place. Continuous flow soldering provides enhanced contact between the honeycomb and frame improving integrity. Alco Multi-Gasket, a combination of neoprene sponge and monel mesh fit, most applications although Alco-Knit or conductive gaskets are available. Standard through holes and spacing for surface mounting installation is customized. Vents without gasketing can be welded in place. Brass vents are typically finished with tin lead plating. Steel vents are commonly finished with tin plating. Other plating options available. Ideal for mobile military transportation, communication shelters or equipment where EMP or TEMPEST is required.
|
|
|
ATI-Thin Filter is the thinnest profile EMI shielded air filter. Extruded aluminum surrounds a singular thin piece of expanded monel or aluminum metal screen and welded in place. Alco-Knit or conductive gasket increase shielding effectiveness. Through hole locations are customized for easy surface mount installation. Plating options enhance shielding effectiveness. ATI- Thin Filters are frequently placed at intake and exhaust areas and are best utilized where narrow space limitations are a requirement.
|
|
| ... products without technical information |
| |
Metex EMI vent panels provide maximum attenuation with minimal air-flow resistance. Shielding effectiveness is greater than 80 dB at 10 MHz for chromate finished, single layer honeycomb, and is increased to 105 dB using our cross cell construction. By selecting the appropriate frame style, finish, and gasket type, performance can be custom tuned to meet your shielding requirements, and your budget constraints.
Vent panels are constructed of aluminum alloy honeycomb, with a perimeter frame of aluminum extrusion for mounting and gasket application. Various gasket options include wire mesh, spring finger, or conductive fabrics
|
|
|
|