|
|
Garages VMG 300°C/90min.
Multiple fan unit with two contrarotating VM fans.
Sizes:
VMG 310 - VMG 1.250 (Ømm)
Application:
Garage ventilation, up to max. 80°C
Technical Data:
V = 1.000 - 100.000 m³/h
P = 100 - 2.000 Pa
L = 0,25 - 75 kW
|
|
Type 100 decentralised ventilation systems can be installed above or beneath a window or in partitioning. The units have an installation height of 100 mm. They can be non powered supply or exhaust units or with a fan with sound attenuation to provide mechanical ventilation of individual rooms or complete buildings. The modular construction consists of a casing enclosure and a function box. The casing enclosure consists of thermal insulated hard inflammable material. The function box consists of a housing made from steel with a non combustible acoustic and thermal lining. Additionally the function box can have an integral backdraught damper, a motorised shut-off damper as well as a fan and filter. The operation of the unit can be switch controlled or by a means supplied by the customer .
rectangular
8 – 22 l/s
30 – 80 m³/h
18 – 47 cfm
Unit standard sound level
difference up to 57 dB
H: 100 mm;
variable depth and width:
depth from 231 mm
width from 1,000 mm
|
|
|
|
|
|
The new ALFA Vent ventilation unit is compact and represents a comprehensive ventilation solution. The wide ranging selection allows you to choose a unit for the ventilation of offices, small shops, coffee shops, restaurants and also sports and warehouse centres or other areas. The product features include high performance with energy savings, low noise pollution, compact size, low height (an advantage when mounted into a suspended sealing), simple regulation and service and a new intuitive remote control with a touch screen.
SPECIFICATION
- Output range from 500 m3/h up to 12000 m3/h
- Two types of electric and water exchangers in all sizes
- Standard unit delivery includes a complete regulation
- Special „Nordic“ version for cold climate conditions
- Square connection for suction and round connection for discharging
- Quiet and economical running
- Easy servicing due to the access from the top and bottom of the unit
- Easy filter cleaning and changing from the left or right side
- Long life span
|
|
|
|
|
|
Air conditioning and air movement of course, are not the same. Neither
actually includes the other but both are necessary components of a
comfortable and energy effi cient indoor climate. Ventilation by itself
cannot cope with the high heat gains generated by modern offi ce
complexes and indoor temperature and humidity levels can fl uctuate
wildly if ventilation alone is installed. On the other hand, air conditioning
cannot supply the necessary fresh air needed for a balanced system.
The ideal solution therefore, requires air conditioning and ventilation in
combination.
Daikin manufactures and markets a range of fresh air reclaim, treatment
and handling systems, carefully designed for integration with its
air conditioning systems in order to achieve the most economic,
environmentally conscious and best possible indoor comfort conditions.
Daikins latest models of ventilation systems have an air flow rate of min. 150m³/h and max. 14340m³/h
For more information on the ventilation systems, please go to the link and you will be connected to the officail Daikin site or take a look at the catalogue.
|
|
Our extraction Fans are produced in sizes from 400m³/h - to 15,000m³/h in the low and medium pressure ranges. The Fans are ideal for individual extraction jobs but also for larger central extraction systems.
LSFG/MSFG 146 - 250The low pressure Fans have a very low noise level and are used for common room extraction, such as in bathrooms, canteens and slightly contaminated rooms.
The medium pressure Fans are used for spot extraction from work processes, which generate poisonous steams or gases, for instance welding fumes and soldering smoke, exhaust extraction and also for grinding and painting extraction.
|
|
UAS BELT DRIVEN TUBE ASPIRATORS
ALUMINIUM CAST HOUSING UAS FANS
UAS - BOR MEDIUM PRESSURE FANS
UAS - BYK HIGH PRESSURE FANS
UAS AXIAL ROOF TYPE FANS
CELLULAR ASPIRATORS
UAS BELT DRIVEN AXIAL FANS
UAS TUBE ASPIRATORS
UAS OBR FANS
|
|
|
COLASIT manufactures, delivers and installs complete ventilation units made of plastic (PP, PPs, PE, PVC). Standard round components such as pipes or moulding parts will be used when available. Special parts such as square ducts and moulding parts are manufactured by COLASIT to the customer's specifications on the most modern machines.
|
|
|
Flexible ducts from -20 to +700 C are available, for ventilation suction or any other areas please contact for more details.
|
|
|
We produce felxible thremally insulated PVC Ducting for mechanical ventilation. Please contact us for your best technical solutions.
|
|
Gokser Machine Co Ltd founded in 1987 ,primarily manufactures air ducts which are capable of being bended ,folded to be reduced to be lengthened.Ducts are manufactured with different sizes and materials interms of their suitability with its ease of use,convenience and efficiency for air and other gas fluids transfer at industrial systems,with the heating rande of -40 ºC to +1100 ºC .
Please ask for our compatible prices of our high quality products
|
|
| ... products without technical information |
| |
The ISIS Recover recuperation unit is designed for the exchange of air in households necessary for healthy breathing. It draws outside air through ducts and transfers heat to it from the exhaust air (heated in the indoor environment), without mixing the two types of air. In this way up to 60% of heat is saved. The fresh air is furthermore filtered and transferred through ducts into individual rooms. The unit draws air in the reverse direction from the room, removes heat and blows it into the outside environment.
The ISIS Recover recuperation unit is, thanks to its air output, compact dimensions and comfortable controls designed for ventilating family houses and apartments.
Specification:
air output 300 to 500 m3/h
recuperation efficiency up to 60%
low power consumption = ENERGY SAVINGS
width of unit 600 mm
equipped with an integrated heater
comes with a mechanical by pass as standard
comfortable controls using a remote control
long operational lifetime
|
|
RECUBOX is a cased heat recovery exchanger for use in transferring air and the recovery of heat from the air taken from the interior to the fresh air transferred into the interior without the two being mixed. It is intended for operation in a basic environment for the transfer of air not containing rough dust, grease, chemical vapours and other pollutants. It is an easy and effective solution leading to a higher ventilation efficiency and lower electrical energy consumption on current air conditioning systems. RECUBOX is equipped with a highly efficient plate counterflow heat recovery exchanger made from Al with an efficiency of 92%.
SPECIFICATION
- under the ceiling installation into air-conditioning duct systems
- flow rate range: 300, 500, 700, 1000, 1500 and 2000 m3/h
- effeciency up to 92 %
- pocket filter design (G4) and without filters
- sandwich cover construction casing 32mm
|
|
|
|
|
|
This is a heat recovery unit, which ensures air exchange in the building, which is essential for healthy breathing. The air is sucked in from outside and heat is added from the exhaust (heated) air without this two being mixed. This saves up to 90% of the heat. Furthermore, the fresh air from outside is filtered and directed through ducting to individual rooms. In the opposite direction, the unit sucks in air from the room, takes off its heat and exhausts to it outside.
The AVENTIS heat recovery unit, with a view to its air volume output, compact dimensions and automatic regulation, is especially intended for the ventilation of smaller shops, cafes, restaurants, administrative areas, sports grounds and others.
SPECIFICATION
- Air output up to 2 400 m3/h
- Recuperation efficiency up to 90%
- Low energy demand thanks to EC motors
- Standard delivery includes sophisticated automatic regulation
- Standard delivery includes multilingual remote control (EN, FR, RU, DE)
- User friendly operation
- Quiet and economical running = safes your money
- Long life span
- Possibility to control extended electric or water heater (PID)
- Unit height 360 mm
|
|
Ventilation unit to extract hot air from open fire place in a one family house and to distribute it in other rooms.
Range Ref. Description Detail Quot.
Groupe Air Chaud Unidébit Extraction of hot air from open fire place
Groupe Air Chaud Filtre Hot air unit with filter and drived by bimetal
|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
Floor Standing Type
This space-saving design with a slim shape and smart vent line offers the least obstruction to the surrounding area.
* The unit can be easily installed on the floor along the wall or under the window. Maintenance is simple.
* This type can be hung on the wall for easier cleaning.
|
|
Always a clean solution
Air Management Systems - competence for the entire air section
Even during the early years of the company, MAHLE recognized that effective cleaning of combustion air and lubricant is an indispensable element in improving the service life of engines and engine components. In line with this understanding, work began in 1926 on the development and production of air and oil filters. Only then was it possible to commence the reduced-wear use in series production of lightweight pistons developed by MAHLE. After having to concentrate on the core business with pistons during the war, re-entry was achieved by a participation in Knecht Filterwerke GmbH. Strong organic growth was accelerated by the acquisition of the Japanese Tennex Corporation, an important component of further expansion. This opened up markets outside Europe, with the result that today MAHLE is the number one worldwide supplier of filter products to the automobile industry.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
