- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Vertical flow meter
Vertical flow meters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Volumetric flow rate: 10 l/h - 2,800,000 l/h
Process temperature: -200 °C - 400 °C
Variable area flowmeter for liquids and gases • Modular design: from mechanical indicator to 4…20 mA/HART®7, FF, Profibus-PA and totalizer • Any installation position: vertical, horizontal ...
Volumetric flow rate: 1.6 l/h - 8,000 l/h
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 220 bar
... comes with vertical or horizontal process connections for NPT or G thread, flange adapters and many other connection options. To provide constant flow rates in case of variable inlet or outlet pressures, ...
Volumetric flow rate: 1.6 l/h - 4,800 l/h
Process temperature: -80 °C - 150 °C
Process pressure: 0 bar - 130 bar
... max. 220 barg / 3190 psig The DK32/34 is a variable area (VA) flowmeter for measuring low flow rates of liquids and gases. The tried and tested meter is particularly suitable for flow ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 psi - 10 psi
Precision: 2 %
... PDFM 5.1 Portable Doppler Flow Meter is a portable flow meter that clamps to the outside of a pipe to gain pipe flow measurement. The ultrasonic Doppler ...
Volumetric flow rate: 1 l/h - 3,000 l/h
Process temperature: 180 °C
Process pressure: 100 bar
... Clean, low viscosity liquids and gases Mounting – Vertically, in line or wall mouted Connections – 1/4 to 1 in., threaded, vertical or horizontal Flow ranges – Water flows: ...
Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar
... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD ...
Volumetric flow rate: 0.6 l/h - 1,000 l/h
Process temperature: -10 °C - 60 °C
Process pressure: 10 bar
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Service: Gases & Liquid Body Material: Polycarbonate (PC) O-Ring Material: ...
Golden Mountain Enterprise
Volumetric flow rate: 0 l/h - 1,000 l/h
Process temperature: -24 °C - 54 °C
Process pressure: 10 bar
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Body Material: Acrylic plastic O-Ring Material: NBR (standard), Viton
Golden Mountain Enterprise
Volumetric flow rate: 20 l/h - 500 l/h
Process temperature: -24 °C - 54 °C
Process pressure: 10 bar
New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. body Material: Acrylic plastic Float Material: Magnet cover with Nickel Connection ...
Golden Mountain Enterprise
Precision: 0.25, 0.4 %
Repeatibility: 0.5 %
... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, contact our specialists.
Volumetric flow rate: 40 m³/h - 500 m³/h
Process temperature: -20 °C - 70 °C
Process pressure: 16 bar
... a complete range of flow meters ISOFLUX, intended for flow measurements of conductive, non-conductive liquids, the range includes the following versions: Description The ultrasonic ...
Volumetric flow rate: 0.1 l/min - 45 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi
... and PCTFE, the model F flow meter is excellent for high-purity applications or use with corrosive liquids. Units are available with a standard valve to monitor and control flow or without ...
Aalborg Instruments
Volumetric flow rate: 0.1 l/min - 45.4 l/min
Process temperature: 0 °C - 121 °C
Process pressure: 0 psi - 100 psi
... PTFE-PFA flow meters Incorporating the principles of traditional rotameter flow technology, these rugged PTFE-PFA flow meters offer solutions to low ...
Aalborg Instruments
Process temperature: 150 °F
Process pressure: 0 psi - 100 psi
... area meter. It is particularly suitable for metering carrier gases in chromatography, indicating and controlling gases in manufacturing processes, liquid and gas measurement in laboratories, pilot plants, flow ...
Aalborg Instruments
Volumetric flow rate: 0 l/h - 4,900 l/h
Process temperature: 0 °C - 121 °C
Precision: 10, 5, 2, 1 %
... Series glass tube VA flow meters are a NEW family of meters with a rugged design for long-lasting performance with low and high-flow gas and liquid applications where ...
Volumetric flow rate: 1 l/h - 100,000 l/h
Process temperature: -198 °C - 420 °C
Process pressure: 6,000 psi - 20,000 psi
... temperature, pressure and process range. One proven flow meter. Engineered to work where you need it: Choose the MT3809 variable area (VA) max flow meter (rotameter) ...
Volumetric flow rate: 0.4 l/h - 220 l/h
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
GHM Messtechnik GmbH
Volumetric flow rate: 0.2 l/h - 80 l/h
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
GHM Messtechnik GmbH
Volumetric flow rate: 1 l/min - 4,000 l/min
Process temperature: -20 °C - 65 °C
Process pressure: 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
GHM Messtechnik GmbH
Corrosion-proof Venturi half shells according to DIN 19559/II for installation in various part filled channels with vertical walls -Corrosion-proof through stainless steel 1.4571 (V4A) -Construction according ...
Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 5 bar
Micro Flow Rate Liquid Flow Meter By combining a thermal MEMS sensor and a highly corrosion-resistant quartz glass flow path, the product can measure micro flow ...
Volumetric flow rate: 1.4 l/h - 500,000 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 1.5 bar - 10 bar
... Stainless Steel AISI 316 and PP depending on flow medium and measuring range. All the flowmeters are equipped with min-max visual flow indicators fully adjustable. In ...
Volumetric flow rate: 2.3 l/min - 19.9 l/min
Process temperature: -150 °F - 425 °F
Process pressure: 0 psi - 5,000 psi
... Model 1100 Turbine flow meter is designed to withstand the demands of the most rigorous flow measurement applications, both on and off the oilfield. Accurate Measurements. Cost-Effective ...
Volumetric flow rate: 120,000 l/h
Process temperature: -30 °C - 300 °C
Process pressure: 40 bar
The RIV500 series of Flowmeters in AISI316L is suitable for medium and high flow rates of liquids, even corrosive, even at high pressures and temperatures. They are available with local flow ...
Riels Instruments
Volumetric flow rate: 0.4 l/min - 400 l/min
Process temperature: -40 °C - 150 °C
Process pressure: 315 bar
... the helical flow meter stands out for its wide measurement range, low impact on the measured fluid, and minimal pressure loss. Only high-quality steels that can withstand corrosive liquids are used ...
Riels Instruments
Volumetric flow rate: 3 l/min - 280 l/min
Process temperature: -60 °C - 180 °C
Process pressure: 20 bar
The HM-P series of turbine flow meters is a reliable and versatile solution for measuring continuous and discontinuous flows. These instruments are ideal for a wide range ...
Riels Instruments
Mass flow rate: 2.2 kg/h - 243,954.9 kg/h
Volumetric flow rate: 0.5 m³/h - 14,000 m³/h
Process pressure: 1 bar - 25 bar
... rich self-checking information make easy maintenance and debugging * Independent password setup, the parameters setup, total flow reset and calibration can be set with different- level passwords, it is convenient for ...
Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: 0 °C - 100 °C
Process pressure: 16 bar - 63 bar
... puises changing with time, instantaneous flow and by the total amount of puises total flow is measured. With the number of these puises changing with time, instantaneous flow and by the ...
Immersion type liquid turbine flowmeters are a quite affordable and practical solution for flow rate and quantity measurement in mostly particle-free liquid fluids. Its working principle is based on the ...
Process temperature: -30 °C - 80 °C
Precision: 2, 1 %
... solution for monitoring the flow or velocity of open channels, agricultural irrigation or groundwater. the best solution. Application : ● Open channel flow rate or flow monitoring ...
Volumetric flow rate: 1 l/h - 3,000,000 l/h
Process temperature: -30 °C - 350 °C
Process pressure: 0 bar - 200 bar
... industry and laboratories. It is not only suitable for small flow measurement with pipe diameter D<150mm, but also can measure the flow of corrosive medium. But it must be installed in a vertical ...
Process temperature: -30 °C - 80 °C
... Ecological discharge flow ● Monitoring of flow rate of agricultural water channels ● Sewage discharge control Advantages 01 24GHz frequency modulated continuous wave (FMCW), and output measurement ...
Process temperature: 40 °C
Process pressure: 20 bar
Precision: 0.1 %
The Emi3 instantaneous flowmeter is the world reference equipment for the characterization of automotive injectors.The EMI3 is a device for measuring the volume injected. It also offers measurement of the opening and ...
Mass flow rate: 1 kg/h - 20,000 kg/h
Process temperature: -20 °C - 450 °C
Process pressure: 0 bar - 6 bar
Microwave-based flow measurement for bulk solids MF 3000 Numerous bulk material applications require continuous measurement of mass flow, e.g. for exact dosing of a material or to ...
Process temperature: 177 °C
Process pressure: 105 MPa
... giving very low threshold and optimizing low flow measurement. At high flow rates the Flowmeter is similarly reliable due to dynamic balancing and careful design of the rotor impeller. ...
Volumetric flow rate: 0 m³/h - 1,000 m³/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 Pa - 3,500,000 Pa
... consumption of machines, cost allocation, and pressure loss monitoring. It measures (bi-directional) mass flow, temperature, pressure, and total flow which is key data for point of use compressed air ...
Volumetric flow rate: 0.2 l/h - 220 l/h
Process temperature: 0 °C - 65 °C
Process pressure: 0 bar - 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
Volumetric flow rate: 1 l/min - 75 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 0 bar - 6 bar
... moves in a transparent conical measurement tube, relative to the flow. The position of the float depends on the volume flow (weight force versus resistance to flow), and indicates the ...
Volumetric flow rate: 2 l/min - 40 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 0 Pa - 600,000 Pa
... – Tmax = 65°C Variable area flow meter for the measurement of both liquid and gaseous fluids. The mounting is vertical with flow from bottom to top. • - Unbreakable. • ...
TANGENTIAL WATER METER, CAST IRON BODY AND METALLIC CASE High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller suitable ...
Tecnidro
TANGENTIAL WATER METER, CAST IRON BODY AND TECHNOPOLYMER CASE High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller ...
Tecnidro
MULTI JET, DRY DIAL, DIRECT READING WATER METER High flow capacity and free water passage with low pressure loss Self-cleaning tangential impeller suitable for dirty water Removable ...
Tecnidro
Mass flow rate: 100 lb/h - 500,000 lb/h
Volumetric flow rate: 1.7 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow BWS meter is a gravimetric solids flow meter that will accurately measure the flow of product that continuously passes through it. Due to its simple, ...
Eastern Instruments
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.6 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow Type II Meter is a gravimetric bulk solids mass flow meter that accurately measures the flow rate and total of the continuous stream of ...
Eastern Instruments
Mass flow rate: 100 lb/h - 8,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 10 ft³/min
Repeatibility: 0.1 %
... CentriFlow-CFL is a gravimetric solid-particle mass flow meter that measures the flow rate and total amount of product that passes continuously through the meter. The ...
Eastern Instruments
Volumetric flow rate: 1 l/min - 3.5 l/min
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar
... standard corrosion protection and antifreeze agents. Description Compact flow meter with scale. The flow meter can be installed in pipes in a horizontal, tilted or ...
Volumetric flow rate: 1 l/min - 70 l/min
Process temperature: 120, 160 °C
Process pressure: 0 bar - 10 bar
... protection and antifreeze agents. Description Compact flow meter with scale and ball valve for shutting off and adjustment. The flow meter can be installed in pipes ...
Volumetric flow rate: 2.5 l/h - 40,000 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 5 bar - 15 bar
Suitable for all kind of industries for flow measuring. Materials Flow tubes: borosilicate glass, length 300 mm Wetted parts: Coated steel, EN 1.4404 (SS316L), PVC, PP, PTFE Options 1 or 2 adjustable ...
TECFLUID
Volumetric flow rate: 0.1 l/h - 100 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 15 bar
Suitable for all kind of industries for low flow measuring. Connections Threaded fittings R1/4” BSP or NPT Materials Flow tubes: borosilicate glass, lenght 150 mm Wetted parts: EN 1.4404 (AISI316L)
TECFLUID
Volumetric flow rate: 0.4 l/h - 1,000 l/h
Process temperature: -20 °C - 200 °C
Process pressure: 40, 16 bar
Suitable for all kind of industries for low flow measuring. Technical specifications Suitable for vertical upwards flow Indicator housing in aluminium. Available ...
TECFLUID
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining