Vertical lathes

60 companies | 326 products

The C517 is specifically designed to provide a good quality performance and functionality for very specific purposes. It is built in a single column vertical unit integrated with a railhead and a...

The C5116, CX5116 Series, manufactured by Dalian Feida Heavy Duty Lathe Manufacture Co.,...

Dalian Feida presnts c5116/cx5116 vertical lathe. It is a single-column vertical lathe. It features a sidehead...

The C5110, CX5110 Series is manufactured by Dalian Liche, and is a single column...

The C5123, CX5123 Series, manufactured by Dalian Liche, is a single column vertical...

{{productDetail[111719]}}

This machine has been designed for various kinds of workpieces in the industries like below.

Our turning & milling head has a special...

{{productDetail[151654]}}

HNK's state-of-the art CNC Vertical Turning Lathe Series delivers high speed and...

■ Three-axis CNC vertical turning center.
■ Thanks to an...

■ Three-axis CNC vertical turning center.
■ Thanks to an...

■ Three-axis CNC vertical turning center.
■ Thanks to an...

■ Three-axis CNC vertical turning center.
■ Thanks to an...

{{productDetail[37396]}}

Table Index Speed 3 min-1
C-Axis Feed Rate 0~800 deg/min
AC Main Drive Motor for Table 60 Horsepower (30 min, rating)
Adjustable Cross Rail, with Five (5) Auto Cross Rail Positions
Automatic Forced Lubrication System
Chip...

{{productDetail[11877]}}


STANDARD FEATURES

• Modular design for flexible solutions according to machining requirements
• High rigidity and vibration damping due to utilization of massive cast iron components
•...


STANDARD FEATURES

• High rigidity and vibration damping due to
utilization of massive cast iron components
• Open sided design
• Hardened and ground box...

{{productDetail[25639]}}

The NILES-SIMMONS RQ and RQQ Vertical Turning Centres with one or two ram heads...

The NV Vertical Lathe Series was conceived for single and multi spindle complete machining according to the pick-up principle with integral work handling. The machining...

{{productDetail[53585]}}

The HT lathes are the right answer in case of machining on limited dimensions. All the main parts of the machine are in cast iron, which assures the rigidity as well as the long life of the machine. The bed is of single type with three ways, the rear way is of prismatic type while the central and front ways...

The HT lathes are the right answer in case of machining on limited dimensions. All the main parts of the machine are in cast iron, which assures the rigidity as well as the long life of the machine. The bed is of single type with three ways, the rear way is of prismatic type while the central and front ways...

The HT lathes are the right answer in case of machining on limited dimensions. All the main parts of the machine are in cast iron, which assures the rigidity as well as the long life of the machine. The bed is of single type with three ways, the rear way is of prismatic type while the central and front ways are of flat...

The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully...

The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully...

{{productDetail[28329]}}

Vertical tuning lathe equipped with movable or fix cross rail.
Its a two column VTL with cast iron bed and welded steel columns, its endowed with ram head CNC-controlled for turning operations or in alternative combined for turning, milling and...

Vertical turning lathe equipped with fix cross rail. This is a single column machine with welded steel basement and column,...

Vertical tuning lathe equipped with movable or fix cross rail and movable table.
Its a two column VTL with cast iron bed and welded steel columns, its endowed with ram head CNC-controlled for turning operations or in alternative combined for turning, milling and drilling...

{{productDetail[39826]}}

A two axis CNC with a single vertical spindle precision boring/ turning machine. The Kasper model 50 is heavy duty spindle with 8 inch spindle nose. The Fanuc 30HP is heavy duty with variable speed drive. The sliding unit on both the axis are rugged in construction, hardened...

The 400 series of machines from IMS Deltamatic is engineered with a 27" spring, and a selection of spindles from 8" to 11.25". It...

{{productDetail[76208]}}

High quality castings, heavily ribbed
directly...

High quality castings, heavily ribbed
directly...

High quality castings, heavily ribbed
directly...

High quality castings, heavily ribbed
directly...

{{productDetail[24643]}}

Victor design one new vertical lathe Vturn-560 to
meet higher roundness requirement for auto
parts.
•...

With a maximum turning diameter of 760mm and
a swing of 900mm the Vturn-V760...

With the increasing demand for bigger and bigger
Alloy wheel manufacturing Victor has come...

{{productDetail[7411]}}

The LiFLEX II 1078 4U allows four parts to...

{{productDetail[28503]}}
{{productDetail[33362]}}

The Vertical Turning Lathes are intended for turning the cylindrical, conic, and curved surfaces as well as the complex shaped workpieces. As an option the rail Hades May be pro-vided with a live tool spindle making it possible to perform drilling and milling operations.
The use of the latest Siemens SINUMERIC 840D CNC and digital drive technology ensures maximum performance and the complete...

The VMCs, KCI series are designed to perform machining operations in a range of turning, boring, drilling, screw cutting, taper turning, and milling.
All machining operations as well as measurements controlled by a computer numerical control system according to a technological program. Together with numerous optional equipments, Vertical Machining Centers,...

{{productDetail[35081]}}
{{productDetail[30822]}}

The machine we present is a CNC lathe designed specifically for the machining of valves.
CNV The series is a CNC lathe that allows turning, boring, drilling and tapping. The machine is composed No.1 Ranked # 1 longitudinal carriage with cross slide...

{{productDetail[37293]}}

The KDM series is a CNC vertical lathe that is integrated with a faceplate available...

The Ck-51 series is a CNC-controlled vertical turning center that is available...

GK Werkzeugmaschinen's KDM 40 (1124-0001181) is part...

{{productDetail[63147]}}

The single column type is a compact vibration-damped cast iron...

The columns of the CONTUMAT VC with their connecting section form...

This machine is built with a fixed portal column, traversable crossrail head and...

The TVU range of vertical lathes has been designed to attain maximum productivity for machining of smaller...

{{productDetail[9031]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation