|
|
REV vertical lathes and vertical turning centers
The REV machines are manufactured in three sizes with table diameters of 1.250, 1.600 and 2.000 mm and are available as 2-axis or 3-axis vertical turning centers.
The REV machines are designed and built to perform efficient machining of one-off work pieces or in repeated production of small and medium-sized series. The high quality design of this machine is result of long-term experience in the manufacture of vertical turning centers which takes into account customers‘ requirements for accurate, reliable and cost effective machines.
|
|
Danobat VTC carries out operations of turning, milling, rectified drilling and, obtaining an excellent precision and a great productivity.
Its Modular Diseño allows that the machine can be formed in agreement with the exigencies of the clients, allowing in addition, to shorten the downtimes and facilitating an optimal process of manufacture.
A Metal Chain with inverted teeth transmits the drive of the motor to the table. One is a quiet mechanism, that diminishes the heat generation at high speeds thus allowing, high accuracy and stability.
The innovating design of Hub C confers high accuracy of positioning, and allows to conduct operations of milling with great shaving starting.
The Crosspiece allows the displacement of the car of the ram in all their route thus allowing to the ram to carry out the change of tooling in both sides of the machine, when the exigencies of the process require a high number of tooling.
Table diameter: of 1000 to 5000 mm
Diameter of I turn around: of 1200 to 6000 mm
Mechanizable diameter: of 1200 to 6000 mm
Mechanizable height: up to 2800 mm
Máx. distance plate-ram: of 1200 to 3000 mm
Main engine power: up to 100 KW
Dimensions ram: of 250 xs 250 mm to 300 xs 300 mm
Power motorized tooling: of 17 to 37 KW
Displacement crosspiece: of 600 to 1000 mm |
|
REV vertical lathes and vertical turning centers
The REV machines are manufactured in three sizes with table diameters of 1.250, 1.600 and 2.000 mm and are available as 2-axis or 3-axis vertical turning centers.
The REV machines are designed and built to perform efficient machining of one-off work pieces or in repeated production of small and medium-sized series. The high quality design of this machine is result of long-term experience in the manufacture of vertical turning centers which takes into account customers‘ requirements for accurate, reliable and cost effective machines.
|
|
SKA vertical lathes and vertical turning centers
Vertical lathes SKA are manufactured in sizes from 12 to 40 (i.e. with the table diameter from 1.250 till 4.000 mm). At these machines the railhead with the ram and the rotary tool drive, the automatic tool exchange and protective guards have been designed in the entirely new way. The SKA vertical lathes are designed for efficient turning, boring, threading, drilling, milling and grinding of components. The machine enables external and internal surfaces to be machined and faces to be turned at constant cutting speed.
|
|
ULTRIX - Integrated versatility: high speed and dynamics turning, milling and grinding
Available in 4 and 5 axes
Direct Drive technology for: contouring table, turning spindle, tilting table
Basement and RAM in Metalquartz: maximum stiffness and vibration damping
Gantry structure with double drives
Independent turning boring bar to increase the turning ability of the machine for the same working area
Milling and turning spindle for power removals
Automation: single or multiple pallet system
ADVANTAGES:
Reduction of the idle time of 80%
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
| Okuma's broad range of lathes offers a variety of bore sizes, bed lengths and optional features, 427 combinations in all. This variety allows us to create custom lathe solutions capable of meeting any production need. Many parts can be completed on a single machine. The ability to hold tight tolerances eliminates the need for separate finishing or grinding operations. Okuma's industry-leading THINC - OSP Control creates optimal operating efficiency. The Absolute Position Encoder allows for the immediate return to production in case of power loss or other machine interruption. |
|
Compact vertical turning machine with up to 3 turrets offers maximum productivity Chuck size up to 200 mm
- Powerful motor spindles
- Short idle times due to the linear motor for the
X axis
- Simple part loading through "balcony type"
- Large, ergonomic, and easily accessible work area
- More possibilities with up to 3 turrets
- Y/B-axis for angular and off center drilling and milling
- Flexible tooling area for specialized machining methods
- Easy linking of single machines
|
|
The machines are supplied with movable cross rails and one vertical head for turning operations. Upon request it is possible to have one or two steel vertical heads fitted, with an automatic clamp and a tool loader.
The CNC can be ECS4802, FANUC 21i-TB or SIEMENS 840 D and the measuring systems with linear scales and Heidenhain encoder .
The manual platform can be modified with automatic 4 self centering jaw built by Rotomors.
All machines are equipped with resistant protective panels and chips conveyers. |
|
Features and Applications
The vertical turning centers of the NV-Series with pick-up system for integrated workpiece handling are single- and twinspindle machines designed for the complete machining of parts. These machines are highly productive units used for the automatic machining and measuring of chuck components. They are especially appreciated as highly-flexible production systems in the automotive industry. |
|
VL 3, VL 5 and VSC 7: the standard vertical turning machine for chucked components
The VL series distinguishes itself by its excellent productivity rating, its high degree of constantly maintained accuracy, its exceptional reliability and its operator-friendliness. The pick-up work spindle fully automatically loads and unloads the machine. Short travels and a compact design result in extremely short loading and cycle times. Turning + automation on a single machine. On a minimum footprint! |
|
| The EMCO FAMUP MMV LINEAR DRIVE floor-type CNC machining center with linear drives for the X and Y axes. A quantum leap compared to conventional drive technologies. Rapid-motion speeds of up to 60 m/min (2362.2 ipm) -with much greater precision. And the linear drive system works virtually without wear. The MMV LINEAR DRIVE series is designed specifically for machining large work pieces. Both the machine's structure and its dynamics are totally untroubled by heavy work pieces: The MMV LINEAR DRIVE series shines when rough machining is required, thanks to its outstanding cutting performance. When doing fine machining at very high speeds, the linear drive ensures that the machines achieve top precision and best surface qualities. |
|
The vertical turning lathes with numerical control, tool magazine and milling, type SC 14 SC 53 CNC or CNC -MSF are machinetools with contouring numerical control designed for machining by turning, circular
and radial milling, boring, or threading some complex pieces in small, medium and large series. |
|
POWERTURN and POWERTURN Y vertical turning centers
POWERTURN and POWERTURN Y vertical turning centers are the most technologically advanced machine generation of vertical turning machines made by TOSHULIN, a.s. The first prototype of POWERTURN machine originated in 1998 and since that time a great number of these machines have found their application, especially in the aircraft industry range.
To enlarge possibilities of the machine, POWERTURN Y vertical turning centre has been launched to a market in 2005. This vertical machining centre has a table located on a linear guide way system, which moves in the Y-axis.
|
|
The SKIQ vertical turning lathes are traditional machine generation of vertical turning machines made by TOSHULIN, a.s.
These vertical lathes have been manufactures in TOSHULIN since the seventieth of the 20th century.
At present, the considerable modernized machine finds its application practically in all industry branches and the number of the sold SKIQ machines reaches some hundreds.
|
|
The vertical lathes with fix crossrail SC TF Series CNC-MSF or with single columns SCM series CNC-MSF, numerical control, tool magazine and milling, are machine-tools designed for heavy duty machining by turning,
milling, boring some complex pieces in small, medium and large series. |
|
SKG vertical lathes and vertical turning centers
The SKG vertical lathes are manufactured with the table diameters of 4.000 and 5.000 mm. The machines have a robust two-column design that enables machining of heavy workpieces with big dimensions. The table is carried in the hydrostatic bearing.
|
|
| BOST VTL C Vertical Turning Machines and Vertical Turning Centres are manufactured from 1400mm table diameter up to 4500mm, with linear table axis (Y axis) optionally. Additional functions like drilling, milling or grinding are available. |
|
- Powerful motor spindle
- Large, ergonomic, and easily accessible work area
- Flexible tooling area for specialized machining methods
- More possibilities with a second turret
- Y/B-axis for angular and off-axis drilling and milling
- Easy linking of single machines with the circulating pallet system PUS
|
|
Camu's Vertical Lathe :
The machines are built from used structures, the working surfaces have been remachined. The result is a new machine with CE mark.
The machines are supplied with movable cross rails and one vertical head for turning operations. Upon request it is possible to have one or two steel vertical heads fitted, with an automatic clamp and a tool loader.
The CNC can be ECS4802, FANUC 21i-TB or SIEMENS 840 D and the measuring systems with linear scales and Heidenhain encoder .
The manual platform can be modified with automatic 4 self centering jaw built by Rotomors.
All machines are equipped with resistant protective panels and chips conveyers. |
|
The CTV linear series ensures unparalleled speed and reliability from its cast iron construction for maximum production safety and performance in 3-shift operation. Innovative DMG features have become the benchmark in vertical turning, these include dynamic linear technology, fast- and high-torque main spindle, and advanced control technology. Due to the expansion of the machine series by the CTV 400 linear with a twin turret, the application range has been extended to include workpieces requiring a large number of tools.
In addition, the CTV linear series offers customer-specific expansion options:
2-sided machining: on a single machine (turn-around station 180°)
Cycle machining: on two machines with the same pallet size
Linear chain-linking: for two machines or more with the same pallet size
|
|
or high-precision machining of heavy parts
Duplomatic tool turret
SMW hydraulic power chuck
premium components made by renowned manufacturers ensure maximum machine reliability
these lathes include an automatic 2-step ZF transmission (except the VTC 4080)
a high intrinsic weight, up to 33,070 lbs, provides for maximum stability during turning operations
powerful drive motors for powerful chip removal
for machining of large diameter (up to 31”) and heavy parts without causing any bending stress for the spindle
high machine rigidity ensures sustained machining accuracy and superior quality
user-friendly high-performance Fanuc 0i-TC control with Manual Guide 0i
Standard Equipment: |
|
| ... products without technical information |
| |
|
|
