|
|
|
|
|
|
TT40 (42" x 40" x 29")
New concept to keep your CNC operator busy every moment. This rigid cast iron bridge construction machine, with dual tables and dual ball screws, and 1200 ipm traverse is designed for high production and high chip output.
-Fully integrated twin pallet machine with a unique design requiring no pallet removal
-Conversational programming with Milltronics CNC control
-Inline spindle design – 24 HP standard with 35 HP option
-Reduced cycle times due to no part loading time
-100% cast iron design with 40,000 lb machine weight
-1200 ipm rapids
-40 pocket double arm tool changer
-Large memories for part storage and execution
-Ground ball screw construction
True encoder positioning feedback
-Graphic program verification
-No leaning into the machine!
-No doors to open and close!
-No time lost changing parts!
-Accurate time management
-Superior chip and coolant control
-Designed and built by American craftsmen
Table Size
40" x 43"
Travel Size
40" x 40" x 29.5"
Horsepower
24/15
Horsepower
35/25
ATC
24 Pocket Arm
ATC
30 Pocket Arm
Weight
39,600 lbs
|
|
|
|
|
|
TT24 (23" x 25" x 20")
New concept to keep your CNC operator busy every moment. This rigid cast iron bridge construction machine, with dual tables and dual ball screws, and 1600 ipm traverse is designed for high production and high chip output.
-Fully integrated twin pallet machine with a unique design requiring no pallet removal
-Conversational programming with Milltronics CNC control
-Inline spindle design – 24 HP standard with 35 HP option
-Reduced cycle times due to no part loading time
-100% cast iron design with 10,000 lb machine weight
-1600 ipm rapids
-24 pocket tool changer standard
-Large memories for part storage and execution
-Ground ball screw construction
True encoder positioning feedback
-Graphic program verification
-No leaning into the machine!
-No doors to open and close!
-No time lost changing parts!
-Accurate time management
-Superior chip and coolant control
-Designed and built by American craftsmen
Table Size
24" x 24"
Travel Size
23" x 25" x 20"
Horsepower
24/15 Two Speed
Horsepower
35/25 Two Speed
ATC
24 Pocket Arm
Weight
8,000 lbs
|
|
|
M2 ROTOPALLET the versatility of the machine structure of the series M made possible SERRTECH the realization of the M2, a vertical processing center “Rotopallet”. This model with pallet change-over switch is a machine, which is aligned to customers, who need high speeds as well as high accuracies, reliability and the reduction and of the unloading times with the machine cutting. A goal of SERRTECH was it to build machines which make an optimal service as well as maintenance work possible.
|
|
DATRON M10 Power
The most powerful HSC machining system from DATRON!
The DATRON M10 Power machining system combines productivity, flexibility of use and a large work area and requires little floor space. With a high manufacturing quality and low costs per piece, this machine will put you a significant step ahead of your competitors.
|
|
|
|
|
|
The Haas VF-10/40 vertical machining center has 120" x 32" x 30" (3048 x 813 x 762 mm) travels and is built utilizing vibration-damping cast-iron components. Like every Haas machine, the VF-10 represents years of ongoing refinement. Customer feedback, coupled with the relentless pursuit of perfection, sees advancements and design-enhancing changes incorporated directly into the production line every day.
The Haas VF-10/40 is a rugged, large-sized vertical machining center that yields reliability and accuracy in a large-framed machine. The VF-10/40 has a 40-taper cartridge spindle driven by a 20 hp (14.9 kW) vector drive. The VF-10/40 produces either 75 ft-lb (102 Nm) of torque at a low 1400 rpm, or 250 ft-lb (339 Nm) at 450 rpm with the optional 2-speed gearbox – and will also run up to 7500 rpm in 1.2 seconds for finishing aluminum. The Haas control features advanced tool management, single-button features, 15" color LCD monitor and a USB port. With a long list of standard features and high-productivity options, the Haas VF-10/40 is one of the best values available today.
|
|
CFV 1300
MAG Cincinnati's new generation of CFV (Cast Frame Vertical) machining centers enable you to produce more parts, more accurately and more profitably. Constructed for rigidity, power and efficiency, the CFV platform delivers smoother finishes, shorter programming and set-up times and new possibilities to increase your bottom line.
The CFV 1300 is the largest machine in the CFV family, making it ideal for the machining of long parts to take advantage of its 1370 mm long worktable. It is also great for multiple setups to increase profitability.
|
|
The entry level machine (XR 1500) has a 10,000rpm, 30kW (40.2hp) 40 taper SKF belt-driven spindle. Faster spindle speeds are available on the more advanced (XR 1500 HP) model which provides users with 15,000rpm from its 30kW (40.2hp) 40 taper SKF directly-driven spindle. And the last model in the range is the XR 1500 HPD - a real powerhouse of a machine - that comes with a ZF two-speed gearbox and achieves 7,500rpm and 764Nm torque (557ft-lb)from its 30kW (40.2hp) 50 taper SKF belt-driven spindle. All spindles are specified with face and taper capability.
|
|
M5 - LINEAR DRIVE , It's a new VERTICAL MACHINING CENTER TRAVELLING COLUMN with linear motor Fanuc on X axe.
This machine can be used also in pendular configuration permitting maximum capabilities as well as a X axis travel of 875 mm on both working area.
Moreover, the ‘M5’ machine is equipped with two indipendent tool storages having 30 tools capacity everyone.
X axis travel 2.200mm
Y axis travel 600 mm
Z axis travel 640 mm
Table Working surface 2400x600 mm
Max loading capacity 6000Kg
Electro-spindle speed 12000 rpm (15000-24000 opt)
Max electro-spindle power for 30 min/continuous 35 - 22.5 kW
Max electro-spindle torque 120 Nm
Axes characteristcs Rapid feedrate (x-y-z) 60 m/min
Work feedrate (x-y-z) 60 m/min *
|
|
DATRON M8 XL - 1600
Large-Format
Machining System
The machining system M8 XL-1500 is specially designed for the precise machining of large-format workpieces. The useable traverse path is 1,020 mm x 1,500 mm with a floor space of 1,850 mm x 2,400 x 1,950 mm. The solid vibration-damped construction with precision linear guides is the basis for high production quality, even whilst machining at high speed. The large swing doors at the front and rear side of the machine enable easy loading of the machine.
|
|
DATRON M7
The new DATRON machining system M7 will substantially increase your machining speed and quality. With a floor space of only 1300 mm x 1300 mm this compact machine offers a traverse path of 520 mm x 650 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 60.000 rpm are available, tailored to your application requirements. With this compact and low-priced “power house” the precise ma-
chining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
DATRON M10 Pro
Productive – Precise – Economic
Changing batch sizes, small lot sizes, high-tech materials: With DATRON you will adapt to production tasks in a flash. Productive and economical as of lot size “1”!
|
|
Mini Mill 2 Vertical Machining Center; 20" x 16" x 14" (406 x 304 x 254mm), 7.5 hp (5.6 kW) vector drive, 6000 rpm, 40-taper spindle, 40" x 14" (1016 x 356 mm) table, 600 ipm (15.2 m/min)rapids, 10-station automatic tool changer, single- or three-phase power, includes USB port, 1 MB memory, 6-month warranty.
The super-compact Mini Mill 2 handles small-parts manufacturing with the same reliability you've come to expect from all Haas CNC machines -- it's ideal for finishing work and cutting aluminum, yet also provides enough low-end torque to cut steel.
|
|
FTV 640
The FTV 640, with its compact footprint, is a popular choice for machining multiple small, thin parts in an extremely cost effective structure with an array of options. Choose the dual load option on the 1800, 2500 or 3700 models to split the table and double your productivity.
|
|
CFV 550
MAG Cincinnati's new generation of CFV (Cast Frame Vertical) machining centers enable you to produce more parts, more accurately and more profitably. Constructed for rigidity, power and efficiency, the CFV platform delivers smoother finishes, shorter programming and set-up times and new possibilities to increase your bottom line.
The CFV 550 offers high precision machining in a very compact footprint, ideal for small parts or small set-ups.
|
|
VM15 (25" x 16" x 20")
The VM15 has been a pioneer in the small VM market for over 10 years. We have combined the 7200 Series CNC control with top-quality components, making this a very economical high-value machining center.
-Top quality components used throughout on this economical machining center
-AC digital servos
-Five bearing spindle with air-purge seal
-Closed loop spindle motor
-Inverted rail design in X-axis
-Fully ground machine tables with 4 T-Slots
-1000 ipm rapid traverse
-Fully ground double anchored ball screws
-High speed Milltronics 7200 Series control
-Networking capable
Table Size
40" x 16"
Travel Size
24" x 16" x 20"
Travel Size
30" x 16" x 20"
Horsepower
12/10
Horsepower
18/12
ATC
16 Pocket Carousel
ATC
24 Pocket Carousel
ATC
16 Pocket Arm
ATC
24 Pocket Arm
Weight
8,600 lbs
|
|
self-center SCV-915
Vertical type, spindle tape No.20, column-traverse compact machining center. It is the best suited for high-speed and high-precision machining of small workpieces
Features
- Main spindle of 17,000 min-1 as standard and 20,000 min-1 optional.
- Main spindle acceleration time and feed axis acceleration/deceleration times are greatly enhanced.
- Pallet changes using the turn table is also available.
|
|
|
|
|
|
MiniFlat with Step Controller
General
MiniFlat® CNC machines are set-up modular (with and without baseframe), with high operating comfort for a multitude of automatable tasks and applications at an ideal price/performance ratio.
The basis is a a sturdy aluminum steel frame with linear units. The clearance free ball screws used in the linear axes ensure high precision, accuracy and smooth running.
MiniFlat®-CNC machines are available as compact units in 4 standard sizes with traverse paths of
X = 300 mm,
Y = 200 / 400 / 800 / 1.000 mm,
Z = 150 mm
in open and closed design (with protective cover).
The linear units with stepper motors are ideally adjusted to the control and the software. The stepper motor controller with safety circuit is located at the back side of the MiniFlat®.
The M series contains the Step Controller iMC-M, the P series the Step Controller iMC-MP. (refer to section "Controls".)
Operation is done from the front with function keys or optionally with the control panel.
For all CNC machines (standard color: grey) extensive accessories and software applications as well as designs with other traverse ranges are available.
Especial suitable for the following application areas:
* Schools
* Education
* Hobby
* Model making
* Engravers
* Goldsmiths
|
|
|
The EMCO FAMUP MMV LINEAR DRIVE. CNC moving column machining centers with linear drives on the X and Y axes. Rapid traverse speeds up to 60 m/min - with high precision. The linear drive system operates with almost no wear at all and has been specially designed for machining large workpieces. The rest of the machine structure design has also been deliberately constructed to take heavy workpieces: one of the characteristics of the MMV LINEAR DRIVE series is its high cutting performance during roughing work. A spindle speed of 15000 rpm is available as an option. The linear drive ensures maximum precision and the best possible surface finishes at high machining speeds for finishing work.
|
|
|
The EMCO FAMUP MMV LINEAR DRIVE floor-type CNC machining center with linear drives for the X and Y axes. A quantum leap compared to conventional drive technologies. Rapid-motion speeds of up to 60 m/min (2362.2 ipm) -with much greater precision. And the linear drive system works virtually without wear. The MMV LINEAR DRIVE series is designed specifically for machining large work pieces. Both the machine's structure and its dynamics are totally untroubled by heavy work pieces: The MMV LINEAR DRIVE series shines when rough machining is required, thanks to its outstanding cutting performance. When doing fine machining at very high speeds, the linear drive ensures that the machines achieve top precision and best surface qualities.
|
|
Traveling Column Series
Gain Productivity and Increase Flexibility.
MAG Cincinnati's Traveling Column Series of machining centers are modular in design to provide flexible solutions. The X-Y-Z machine axes are behind the spindle to provide highly efficient processing with virtually no restrictions on workpiece weight or size.
|
|
|
M4- The versatility of the machine structure of the series M made SERRTECH the realization of the model for M4 possible with a Verfahrweg on the x axis of 1650 mm. This processing center permitted by the option „TREATMENT OF PENDULUMS “which of an additional unabähngigen tool shop with 30 tool places and a partition wall consists, the treatment in the pendulum enterprise, with a Verfahrweg on both sides of the x axis of in each case 600 mm X-Y-Z axle: 1,650-600-640 mm of work surface: 1.800x600 mm
|
|
|
|
|
|
The TEKNA Model TK 426/1, 3 axes CNC Vertical Machining Centres, is designed for drilling, conventional milling and copy milling operations in aluminum profiles. Other materials include steel profiles up to 3 mm thick, plain or steel reinforced PVC profiles, and various other plastics or wood.
Special fabricated and welded steel bed frame with finish machined, hardened and ground "X" axis slideways. Precision rack and pinion axis motion driven by direct current motor with a rapid-traverse rate of 49 meters per minute.
Bridge type gantry assembly with cast structural beams that include finish machined, "Y" and "Z" linear guides and recirculating ball screws. Motion driven by direct current motors with a rapid-traverse rate of 14 meters per minute in Y and 14 meters per minute in Z.
External protection made of steel tubulars and complete with photoelectric cells preventing anyone to step into dangerous zones when the machine is operating.
Pneumatic clamps to secure the profiles - hand displacement.
USB ports, Lan, Modem.
|
|
Vertical mold-making machine, 30"" x 20"" x 20"" (762 x 508 x 508 mm), 30 hp (22.4 kW) 12,000 rpm, inline direct-drive spindle, 710 ipm (18.0 m/min) rapids, 55-gallon (208-liter) flood coolant system.
The VM-2's 36"" x 18"" (914 x 457 mm) cast-iron table features standard T-slots (7 in the Y direction and 3 in the X) as well as an array of drilled and tapped holes. It has a maximum weight capacity of 3000 lb. The VM-2 comes standard with a 24+1 side-mount tool changer that swaps tools in 2.8 seconds.
Also standard are an automatic chip-auger system, programmable coolant nozzle, remote jog handle, automatic air gun, rigid tapping, high-speed machining software with look-ahead, Ethernet interface, user-definable macros, coordinate rotation and scaling, spindle orientation and power- failure detection module. The Haas control features advanced tool management, single-button features, 15"" color LCD monitor and a USB port.
|
|
VM20 (30" x 20" x 26")
This compact machining center offers high federates and rapids. Combine that with a rigid frame design and the Milltronics 7200 Series CNC control, and the “American Made” VM20 is an excellent choice for high-production customers.
-Chip drawers or optional auger or conveyor for chip removal
-Automatic lubrication
-Spindle cartridge-cooling system
-Spindle motor options to 24 HP – two speed
-AC digital servos
-Five-bearing spindle with air-purge seal
-Closed loop spindle motor
-Inverted rail design in X-axis
-1000 IPM x 4 rapid traverse, Optional 1600 IPM
-Fully ground double anchored ball screws
-High-speed Milltronics CNC Control
-Networking capable
Table Size
34" x 20"
Travel Size
30" x 20" x 26"
Travel Size
40" x 20" x 26"
Horsepower
24/15
Horsepower
24/15 Two Speed
ATC
24 Pocket Carousel
ATC
16 Pocket Arm
ATC
24 Pocket Arm
Weight
10,000 lbs
|
|
Large Heavy-Duty Vertical Machining Centers
Big - Rangy - Flexible - Robust
MAG Cincinnati is recognized as the leading supplier of Large Vertical Machining Systems with installations in all major industry segments including Heavy Equipment, Off-Road, Defense and Aerospace.
Our modular designs are based on proven components to allow easy configuration to customer specifications. Choose from stand-alone or cell configurations to best meet your production needs.
|
|
|
|
|
|
For long travels and heavy-duty cutting capacity in a vertical-spindle machining center, Haas Automation offers the VS series: bed-style vertical machining centers with fully supported x-axis travels and large-scale production capabilities.
The Haas VS-3 is a 50-taper, geared-head vertical machining centers with travels of 150" x 50" x 50" (3810 x 1270 x 1270mm) and a 30+1 side-mount tool changer. Because the table is supported along the entire x-axis travel, VS models have a part capacity of 10,000 lb. The 30 hp (22.4 kW) (peak) 7500-rpm vector drive spindle produces 450 ft-lb (610 Nm) of torque at 500 rpm, more than enough power for heavy cuts in steel or cast iron. An x-axis travel linear scale is standard on the VS-3 for maximum positioning accuracy.
Additional production-oriented features include a remote jog handle, automatic chip-auger system, rigid tapping, user-definable second home button, double-anchored ballscrews, direct-coupled servomotors and automatic lubrication. The user-friendly Haas control features advanced tool management, single-button features, 15" color LCD monitor and a USB port.
|
|
|
|
|
|
VM25 (50" x 25" x 24")
This new style VM25 is a heavy-duty high-speed machine that features oversized ball screws and linear rails. Our newly designed 15,000-pound casting affords superior rigidity and damping characteristics for rugged performance and large travel. This "American Built" machine is a great value.
-Chip auger with optional conveyor for chip removal
-Oversized fully ground machine table with 5 T-Slots
-Automatic Lubrication
-Spindle cartridge-cooling system
-15HP closed loop two speed spindle motor with options to 30 HP
-Spindle options to 15,000 RPM
-AC digital servos
-110mm O.D. 5-bearing spindle with air-purge seal
-Inverted rail design in X-axis centers the table support under the spindle
-1000 ipm X, Y, Z rapid traverse, Optional 1600 ipm
-Fully ground double anchored ball screws
-High-speed Milltronics 7200 Series CNC – PC based conversational control
-Networking capable
Table Size
56" x 24"
Table Size
66" x 26"
Travel Size
50" x 25" x 24"
Travel Size
60" x 25" x 24"
Horsepower
24/15 Two Speed
Horsepower
35/25 Two Speed
ATC
24 Pocket Carousel
ATC
24 Pocket Double Arm
Weight
19,000 lbs
|
|
The entry level machine (XR 1500) has a 10,000rpm, 30kW (40.2hp) 40 taper SKF belt-driven spindle. Faster spindle speeds are available on the more advanced (XR 1500 HP) model which provides users with 15,000rpm from its 30kW (40.2hp) 40 taper SKF directly-driven spindle. And the last model in the range is the XR 1500 HPD - a real powerhouse of a machine - that comes with a ZF two-speed gearbox and achieves 7,500rpm and 764Nm torque (557ft-lb)from its 30kW (40.2hp) 50 taper SKF belt-driven spindle. All spindles are specified with face and taper capability.
|
|
DATRON M7 HP
The new DATRON machining system M7HP will substantially increase your machining speed and quality. With a floor space of only 1,300 mm x 1,300 mm this compact machine offers a traverse path of 520 mm x 650 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 50.000 rpm are available, tailored to your application requirements. With this compact and low-priced “power house” the precise machining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
|
|
|
|
HS650L
Super High-accuracy milling machine
The Sodick dynamic linear technology comes into operation with the new Sodick high-speed milling machine HS650L as well.
The very high specification for the HS650L results in extremely high levels of accuracy, far beyond those normally associated with high speed milling, making it particularly appropriate for mould and die applications which call for maximum precision and surface quality, for example in the optical and electronic communication sectors.
This high precision, linear motor drive machining centre offers the high rigidity, accuracy and performance that customers have come to expect of the smaller HS430, but with a larger table, extended stroke and open height, increased maximum tool length, and double the linear motor output power.
To ensure that the very high levels of dynamics and precision can be applied optimally to work-pieces, the HS650L machine bed features a cast construction for rigidity and stability – as evidenced by the machine weight of 7,200kg. However, while the machine itself offers solidity and strength, the software to operate it is lightning fast state-of- the-art technology, using the Sodick Motion Control closed regulating system which ensures that impulses from the direct measuring system are sent via the CNC core in real time, without detours, directly to the drive regulator.
|
|
|
|