|
|
|
|
|
|
Bridgemilling center - KX40
TRAVEL
X axis - Longitudinal travel 2300 mm
Y axis - Cros travel 1100 mm
Y axis - Vertical travel 600 mm
TABLE
Table area (length x with) 2260 x 1140 mm
Max. width of working piece 1300 mm
Distance spindle nose/table (min/max) - spindle in vertical position 95/695 mm
Admissible load on table 2500 kg
SPINDLE
Tool taper SA40
Tool clamping force 1000 kg
Spindle speed 20-2250 x 2250-9000 rpm
Characteristic speed 375/1500 rpm
Spindle motor power 10/15 kW
Max. spindle torque 260/410 Nm
FEEDRATES
Rapid feed - linear feedrates X-Y=25 Z=30 m/min
Programmable working feed 1 à 7 m/min
Maximal acceleration - linear feedrates X-Y-Z=1 m/s²
Max. thrust - linear feedrates X=18000 Y-Z=8200 N
Positioning : linear axes 10 μm
TOOL MAGAZINE
Number of housings 24
Over-all measurments by tool (weight/diameter/length) 6/125/340 kg/mm/mm
Tool changing time 8 sec
OVER-ALL MEASUREMENTS AND SUPPLIES
Length x width x height 6400 x 3150 x 3260 mm
Weight 10500 kg
Compress air : Pressure /Flow 5 bars - 1m3/h bar-m3/h
Total installed power 37 KW
|
|
|
|
|
|
The Milltronics BR series machines are manufactured in the US and are very unique machines. They were designed for fabrication, pattern, and job shops that machine large light parts or patterns.
MACHINE FEATURES
- Economical Combination of Travels and Performance
- Ideal for Light & Moderate Milling of Metals
- 45 mm Linear Ball Way
Construction from
- Five Bearing (60 mm dia.) 8000 RPM Spindle with Air Purge & Labyrinth Seal
- Steel Way Covers
- Digital AC Servo Motors from Yaskawa
- HUGE Travels and Table Surfaces Designed to Fit Between the Lightweight Routers and Heavyweight Cast Bridge
Machines
- Large Diameter High Speed Precision Ground Ball Screws
- 24 HP High Torque Closed Loop Vector Spindle Drive
MACHINE OPTIONS
- 24 Pocket Carousel ATC
- Flood Coolant System
- High Speed Spindles 15K, 20K, or 24K
- Two Speed 24 or 35 HP Closed Loop Spindle Drive
- Digitizing
- 4th Axis
- Riser Blocks
- Auto Lubrication
CONTROL FEATURES
- High Speed 1200 Blocks/sec Centurion 7 CNC with Dual 32 Bit Processors
- Conversational and ISO Programming
- High Resolution Large Color LCD Display
- Feed Forward and Look-Ahead Option for Smooth and Accurate Machining
- Networking & Flash Memory Reader Options
- 12 Mb Motionless Disk Parts Storage Memory
- 8 Mb Extended Program Execution Memory with Large Program Editing/Execution
Capabilities
- Concurrent Programming
|
|
|
Based on the concept of reliability, the model FP adds to the typical characteristics of the bridge design an exceptional strength and versatility thanks to its over-sized structure, hardened and ground slideways and numerous optional features available. The result is an homogeneous machine that ensures rigidity, damping capacity and accuracy.
|
|
HIGH PERFORMANCE
Model KP-AR
- Centralized control panel.
- Digital numerical control.
- Push-button panel with electronic handwheel.
- Ball screws in longitudinal, cross and vertical movements.
- Counterweight with direct hydraulic cylinder in vertical movement.
- The three movement guided with preloaded roller packs over hardened and ground steel guideways.
- Hydromechanical tool clamping.
- Direct outlet head.
- Spindle orientation.
- Hydraulic unit.
- Automatic lubrication.
- Electrical cabinet, with temperature conditioner.
- Tool coolant equipment JUMA+GAIN 60, tank 1000 l, 30 l/min, 10 bar.
|
|
| ... products without technical information |
| |
|
|
|
|
The FT45 model is a milling-boring machine with movable column, which is equipped with two independent units:
1.a common unit for all versions, consisting of a ram and a column, which has two controlled independent longitudinal motions;
2.a cross travel unit, which is located in right-angle position to the first unit, available in two versions, i.e. with fixed table (FT45TF) and with rotary table (FT45TG).
The machine structures are made of Italian Meehanite cast-iron and have been subject to a stress relieving treatment. The system utilizes modern electronical technologies so to ensure long lifetime and high reliability of the mechanical and electronical system.
The large dimensioning and the installed power rates of the machine permit machining of big parts. The control system and the electronic and hydraulic axes-compensation systems permit highest accuracy.
Furthermore, there is the possibility to equip the machine with an automatic tool-changer and a pallet-changer. The wide range of special accessories increase the flexibility and versatility of the machine for all requirements of the customers.
|
|
| ... products without technical information |
| |
|
|
|
|
The FT45 model is a milling-boring machine with movable column, which is equipped with two independent units:
1.a common unit for all versions, consisting of a ram and a column, which has two controlled independent longitudinal motions;
2.a cross travel unit, which is located in right-angle position to the first unit, available in two versions, i.e. with fixed table (FT45TF) and with rotary table (FT45TG).
The machine structures are made of Italian Meehanite cast-iron and have been subject to a stress relieving treatment. The system utilizes modern electronical technologies so to ensure long lifetime and high reliability of the mechanical and electronical system.
The large dimensioning and the installed power rates of the machine permit machining of big parts. The control system and the electronic and hydraulic axes-compensation systems permit highest accuracy.
Furthermore, there is the possibility to equip the machine with an automatic tool-changer and a pallet-changer. The wide range of special accessories increase the flexibility and versatility of the machine for all requirements of the customers.
|
|
| ... products without technical information |
| |
CNC BRIDGE TYPE MILLING MACHINE, WITH FIXED CROSS BEAM
HIGH PERFORMANCE
Model FPC-AR
- Centralized control panel.
- Digital numerical control.
- Push-button panel with electronic handwheel.
- Ball screws in vertical movements.
- Rack and double motor and pinion in longitudinal and cross movements.
- Counterweight with direct hydraulic cylinder in vertical movement.
- The three movement guided with preloaded roller packs over hardened and ground steel guideways.
- Hydromechanical tool clamping.
- Direct outlet head.
- Spindle orientation.
- Hydraulic unit.
- Automatic lubrication.
- Electrical cabinet, with temperature conditioner.
- Levelling wedges and anchoring elements
|
|
| ... products without technical information |
| |
|
|
