|
|
DATRON M7
The new DATRON machining system M7 will substantially increase your machining speed and quality. With a floor space of only 1300 mm x 1300 mm this compact machine offers a traverse path of 520 mm x 650 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 60.000 rpm are available, tailored to your application requirements. With this compact and low-priced “power house” the precise ma-
chining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
self-center SCV-915
Vertical type, spindle tape No.20, column-traverse compact machining center. It is the best suited for high-speed and high-precision machining of small workpieces
Features
- Main spindle of 17,000 min-1 as standard and 20,000 min-1 optional.
- Main spindle acceleration time and feed axis acceleration/deceleration times are greatly enhanced.
- Pallet changes using the turn table is also available.
|
|
CFV 550
MAG Cincinnati's new generation of CFV (Cast Frame Vertical) machining centers enable you to produce more parts, more accurately and more profitably. Constructed for rigidity, power and efficiency, the CFV platform delivers smoother finishes, shorter programming and set-up times and new possibilities to increase your bottom line.
The CFV 550 offers high precision machining in a very compact footprint, ideal for small parts or small set-ups.
|
|
|
|
|
|
MiniMod® CNC Machines are desk top machines for a variety of branches and applications at a favorable price-performance ratio.
Especial suitable for the following application areas:
* Optics
* Jewelry Industries
* Engravers
* Goldsmiths
The basis is a a sturdy aluminum steel frame with linear units. The clearance free ball screws used in the linear axes ensure high precision, accuracy and smooth running.
MiniMod®-CNC machines are available as compact units in 4 standard sizes with traverse paths of
X = 300 mm,
Y = 200 / 400 / 600 / 800 mm,
Z = 150 mm
in an open design and with a traverse path of Y = 200 mm in a closed design (with protective cover).
The linear units with stepper motors are ideally adjusted to the control and the software. The stepper motor controller of the MiniMod® with safety circuit is located in the right inductor.
The M series contains the Step Controller iMC-M, the P series the Step Controller iMC-MP. (refer to section “Controls”.)
Operation is done from the front with function keys.
For all CNC machines (standard color: grey) extensive accessories and software applications as well as designs with other traverse ranges are available.
Applications
MiniMod®-CNC Machines are the basis for the set-up of machines for:
* Drilling and milling
* Assembling and mounting
* Imprinting and engraving
* Metering and fastening
* Buring and polishing
* Forming and modeling
* Bonding and casting
* Soldering and welding
* Measuring and testing
* Scanning
... etc.
|
|
|
|
|
|
Quick, precise, compact, and as multifaceted as your manufacturing tasks
The machining centres of the CHIRON 08 MAGNUM series are among the most versatile machines in the compact category.
These high performance centres are quick to set up, easy to operate, very stable, highly dynamic and low-maintenance. With a chip-to-chip time as fast as 1.3 s, axis acceleration up to 2 g, and spindle speeds up to 40,000 rpm, these machining centres are setting records in productivity per unit area.
With its modular design, and numerous configuration possibilities, every FZ 08 MAGNUM basic machine can be customized into a perfect solution for your requirements.
Basic design – vertical and compact for high productivity per unit area
Design related advantages:
- I Simple, robust basic structure
- Vertical moving column principle
- Low maintenance and long lasting
- Compact design for high productivity per unit area
- High rigidity and thermal stabilityI Digital direct drives and guides outside the work area
- High running, positioning and long-term precision
- Fully enclosed work area
- Protective covering made of stainless steel
- Easily viewable and accessible work area
- Smooth, steep walls for ideal chip fl ow directly to the chip conveyor
- Foundation free set-up
- Service friendly access to all units
- Can be easily relocated within the plant, thanks to built-in transport wheels
|
|
Travel
- X-axis travel (Longitudinal movement of spindle head): 600mm
- Y-axis travel (Cross movement of table): 400mm
- Z-axis travel (Vertical movement of spindle head): 350mm
Table
- Table working surface: 700x450mm
- Table loading capacity: 300kg
Spindle
- The highest revolving speed: 24000min-1[30000min-1]
- Spindle taper hole: 7/24 taper,No.40(BT40)
Automatic tool changer
- Tool storage capacity: 30 tools[40 and 60]
APC/PLS
- The number of palettes: [2nd page] / [5th page]
NC equipment: FANUC 31i -MODEL A5
|
|
New generation grinding machine model LG-400 equipped with GRANITE bed, axes driven with LINEAR MOTORS and wheelheads and workheads with BUILT IN motors technology. It is a grinding machine for, both, low and high speeds (120 m/s) for grinding with diamond and CBN wheels, and contouring processes.
The machine is prepared for quick loading by means of an integrated gantry loader, developed by Danobat as well as the option of integrate a load/unload robot.
Length to be ground 400mm
Height of centres 150 mm
Max. admitted weight 80 kg
Wheel size 500 mm x 80 mm
Wheel peripheral speed 60/120 m/s
|
|
TSCHUDIN T 35
The modular cylindrical grinding machine for production, for the most varied applications in the production of medium and large series. Hydrostatic guides and a large application range, from small integrated handling up to complex systems with autonomous cells. The production machine with synchronous processing, prism and rod grinding, and integration of additional operations. Distance between centers up to 400 mm, height of centers 175 mm, weight of workpieces 150 kg.
|
|
The basic concept of the S12 with a distance between centres of 150 mm, a height of centres of 175 mm and a grinding wheel diameter of 500 mm has been targeted at precision without compromise.
The heart of the machine is a asked on high precision positionable linear motors completely new, patented drive/guide system b. The extremely rigid slides with hydrostatic bearings are magnetically pre-tensioned. The in-feed movement can be programmed in 10-nanometer steps.
|
|
|
|
|
|
Cylindrical grinding machine CNC of production.
Series GL particularly adapted to the mass and series productions, is made up of allied machines of great robustness to a very high degree of accuracy.
Our range GL very largely used by the aeronautics and automobile manufacturers.
The GL are declined in many versions, in particular with divings right or oblique and grinding stones CBN or conventional.
The lubrication of the ball slides and screws is carried out in closed circuit, thus getting a powerful and economic greasing.
They offer a great flexibility and are configurable made-to-order according to the requests of our customers.
Numerical control GC50 developed by our engineers proposes a very convivial interface HMI, with touchscreen in color and a multitude of preprogrammed cycles very easy to exploit.
The cycles of correction suggested are configured in conversational conversation mode, the procedures of change of grinding stone, of adjuster or locator are extremely simplified and detailed with the screen stage by stage to avoid any error.
Of series a car-calibrator TOYODA is proposed thus that a side locator.
The implementation and the changes of series are of a great simplicity, the access to the elements of catch of part and the tools such as the grinding stone and the adjuster are optimal for rapid interventions and without risk.
Finally the capacities suggested go 250 mm between-points up to 2500 mm, and 60 mm in diameter usinable to 300 Misters.
For a detailed description and supplements we invite you to consult booklet pdf in appendix or to contact us.
|
|
|
|
|
|
Cinetic Landis fully programmable CNC Plain and Angle Grinders are ideal for medium-to-high volume production cylindrical grinding. These grinders offer the flexibility to do skive grinding using a narrow wheel and traversing table, stitch grinding for plunging multiple diameters, or traverse grinding of straight diameters.
The Landis CNC Plain and Angle grinder is a cylindrical grinding machine designed for high production grinding of concentric or eccentric parts. This value-engineered grinder has been designed using Finite Element Analysis techniques to combine the superior output potential of a flexible grinding system with maximum cost effectiveness.
The Landis CNC Plain and Angle grinder is available in either straight or angle wheelhead models. The angle head model is especially cost-effective because the ability to use up to a 760mm diameter wheel significantly increases wheel life in angle grinding. The Landis CNC Plain is the ideal machine for grinding a wide range of parts including concentric power steering components, transmission-type parts, small camshafts and small crankshafts.
Available in 250 or 350mm grindable lengths
|
|
|
|
|
|
The Haro Sharkline is a 5-axis NC for both producing and grinding/sharpening complex tools. A very powerful software toolbox has been developed for exceeding the market demand in terms of managing tool complexity.
A patented gantry beam design allows all angular and cross positioning for the wheel without any restriction. With its 500 mm longitudinal and cross stroke, this product is designed for grinding or cutting from solid, for producing complex tools and tool tips with a single adjustment…
High speed spindles are adjustable step-less from 3’000 to 18'000 RPM and powered from 3,5 to 10 kW. The HARO grinding spindles with double output shaft are greased for life and water cooled. Their magnetic and dynamic balancing is so accurate that surface quality of Ra 0.03 µ can be reached. Their compact volume increases the possibilities of the grinder as well as its capabilities, makes settings easier and provides a better visibility.
The NC control is based on Siemens technology (SINUMERIK 840 Di)and will take advantage of our experience based grinding software.
|
|
CNC GEKA solutions for automatic punching of plates, PAXY range, are designed for solving the needs of punching thick plates. The tedious and time consuming operations previous to punching of plates like centre marking and manual positioning are solved automatically by the PAXY range. These solutions will help you increase productivity, reduce costs and increase accuracy.
PAXY range has a wide versatility and can be equipped with several options to customize the machine to each customer's needs. PAXY 1000/1500/2000 is a fully automatic solution to punch plates from 4 to 40 mm and up to 2000x750 mm size. Thanks to its automatic movement with material clamping, punching of any plate is fast and easily completed.
On the other hand, PAXY X plus range is designed to punch automatically long plates.
|
|
PG Marking, punching and drilling machine for plates and gussets
PG range: PG 83 PG 83 P PG 116 PG 116 S PG 116 P PG 2000
Simple, inexpensive and fast machines
The machines from the PG range are powerful and fast, while combining at the same time operations such as marking, punching, drilling, pop marking, deburring and tapping for working on large-size plates and gussets (up to 2000 x 1000 x 40 mm).
The layout of the clamps inside the machine gooseneck frees the working space and makes handling of parts to machine easy.
Easy programming and use thanks to the computer-assisted manufacturing softwares and the numeric control system.
The machines in the PG range are inexpensive and fast, and satisfy most requirements in a structural steel workshop. The layout of the clamps gives the operator space and safety, important factors ensuring high productivity.
|
|
|
This is the most modern, rapid and flexible CNC line to punch plates. Its main features are: low-cost; easy installation; reduced dimensions; easy programming; flexibility for small/medium size pieces. Besides the multi-tool punching station, a marking tool and a drilling head are also available. The plate positioning is granted by a two-pincher coordinate table assuring high precision while processing.
|
|
This machine is capable of producing scrolled strips for end production.
Unlike the slitter system with rotary cutters, the scroll shear is a stamping shear, processing straight trimmed or primary scrolled sheets.
Highly versatile: Can be used to process bright, lacquered and printed sheets made of tinplate, TFS, aluminium.
Flexible modular design.
Optimum handling.
Minimal changeover times.
Modular systems allows individual add-ons.
Scroll strip magazine
Magazine for fully automatic collection
of scroll trips on pallets.
|
|
Makino MAG1:
Effective machining of smaller aluminium structural parts
Makino’s MAG series of 5-axis horizontal machining centres is specifi-cally suited to the just-in-time manufacturing needs of the aerospace industry. The latest offering in this series is the MAG1, a 5-axis machin-ing centre designed to handle quick, high-precision aluminium produc-tion of parts up to 1500 mm.
|
|
|
Designed for large, aluminum monolithic parts, the MAG4 horizontal machining center delivers high productivity machining to reduce both cutting time and non-cutting time for structural aerospace pieces, including wingboxes, fuselage sections, rudders and a myriad of other components. MAG4 slashes cutting time with high power, high-speed machining and maximizes spindle usage by simultaneously loading and unloading parts during machining. The MAG4 high-speed machining center features innovative A and C axes that equip the reducing gears to virtually eliminates moving wires, tubes or hoses outside of the body. It also combines feedrates up to 1,574 ipm, a 60-tool magazine and a 30,000 rpm spindle to maximize speed and productivity. Table design is modular so it is available in different sizes. The work indexer allows for continuous material flow to and from the machine. The x-stroke variation corresponds when adding structure base units
|
|
H5 Series (H5 800/H5 1000)
Increase productivity. Simplify complex parts processing.
MAG Cincinnati's H5 Series of 5-Axis horizontal machining centers are designed to be highly flexible and easily adapted to changing part requirements. Whether you require high-speed, high-accuracy machining for aluminum parts or the kind of high-torque machining required for cast iron or steel, H5 machines can be configured to meet your needs.
|
|
|
These multi-spindle automatic lathes for medium- to large size lots in the diameter range of 20 mm are the most efficient automatic lathes, with 6 stations. Using the most advanced technology, highly precise turning work pieces are machined in the shortest possible job-times.
|
|
= NZ2000 T3Y3 =
X1, X2, X3: 210mm, Y1, Y2, Y3: 110mm, Z1, Z3: 300mm, Z2: 810mm
To the pinnacle of mass-production machining.
Is it possible to achieve more accurate, efficient machining and to improve productivity for complex-shaped workpieces?
For this dilemma facing the manufacturing industry, Mori Seiki has one answer. That answer is the NZ Series.
Up to 3 turrets and the Y-axis structure can be installed, and the BMT™ (Built-in Motor Turret) is used for all turrets.
Also, Mori Seiki's original technology, the ORC™ (Octagonal Ram Construction) is used for the Turret 2 Y-axis structure, controlling thermal displacement and improving chip disposal.
The NZ Series, which is packed with features to increase productivity, offers unparalleled efficiency for bar work machining.
|
|
|
Machines of measurement from which guidance is protected. this technology makes it possible to work in aggressive mediums of workshop, there or a machine of traditional gantry measurement quickly becomes inoperative
|
|
Advanced Seam Welding System - PS1000
Features:
- Seals parts as small as 2x2 mm
- Miyachi Unitek HF25 inverter power supply with real-time feedback
- Rugged, precise motion control
- Servo motor-driven electrodes
The advanced technology of the PrecisionSeal 1000 opens new frontiers in quality, cost and capability in seam welding. It precisely controls energy, position, timing and force to hermetically seal even the smallest and most delicate semiconductor device packages.
|
|
Strapping installations for product securing during transportation
- New installations or for integration into existing packaging lines
- Flexible solutions with PP, PET or steel strap
- From the same partner: development to commissioning
- Additional products: see „More information...“
- Machine, strap and after-sales service as a total package
|
|
CHIRON MPS machining centres can be ideally used for the cost-effective, 4-side complete machining of profiles. With this profitable system our customers can manufacture variants, shorten internal operating processes, and reduce personnel expenses.
The MPS machining centre offers the perfect combination of productivity and low spatial requirements. Complete machining from profiles with MPS machining centres is distinguished by short run-through times and high flexibility for variant production.
The feed unit automatically feeds the raw material. Maximum precision is guaranteed, thanks to theall-round machining in one set-up. The high process productivity results in lower piece costs.
|
|
BLOHM’s production grinding machine line PROFIMAT is designed for medium to large batch sizes and for use in multi-shift operation. Its sheer robustness, reliability with highest availability and precision are decisive characteristics for profitable production in the automotive and sub-supplier industry, the hydraulic industry as well as the turbine industry.
The PROFIMAT MT is a flexible, high performance profile grinding machine with moving machine table
The PROFIMAT MC is a very compact and high heavy duty production machine in traveling column design.
The PROFIMAT RT allows%
|
|
| ... products without technical information |
| |
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
Combined magnetic separation solutions
Application: automatic separation/recovery of ferrous and non-ferrous materials.
Main features:
- Custom-designed and manufactured separation solutions for specific applications, combining conveying, vibratory, screening, magnetic separation and metal detection equipment;
- Single operating console for complete control over the whole system;
(!) For conducting laboratory tests with your material please contact our sales department.
(!) Please attach a completed questionnaire to quotation requests.
|
|
|
|
see the results for the following category : 
