|
|
5 AXIS MOBILE GANTRY VERTICAL MILLING MACHINE MACHINE - EVO
Application: plastics, composites and pattern making
Cartesian structure with movable portal
Linear axis:
- Strokes:
X = from 2400 to 6000 mm
Y = from 1200 to 2600 mm
Z = 800 - 1300 mm
- Maximum speeds: 80 m/min (X-Y), 60 m/min (Z)
- Maximum acceleration: up to 6 m/sec˛
- Position accuracy: +/- 0,03 mm/m
- Repeatability: 0,02 mm
Rotating axis:
- Rotation: 440° (C), +180°/-120° or +/-120° (A)
- Maximum speed: 125 °/sec or 300 °/sec (C) e (A)
- Positioning accuracy: 60 arcsec
- Repeatability: 20 arcsec
Electrospindle: power 8 or 12 kW, max. speed 22.000 or 30.000 rpm
Tool magazine with 12 stations: HSK50-F or HSK63-F
Working table: fixed, rotating (TR) or Twin Shuttle (TS)
CNC type OSAI 10/510i or SELCA 4045P or SIEMENS 840D Power Line
Peripheral protections or full enclosure |
|
This machine of five hubs and great benefits is an itemizing of the successful MEMPHIS and goes directed to the machining one of complex surfaces that require high precision.
Technical characteristics
Surface table 4,500 xs 3,000 mm.
Longitudinal route 5,000 mm.
Cross-sectional route 3,000 mm.
Vertical route 1,250 mm.
Width between columns 4,000 mm.
Fast advances: X, AND, Z: 50.000 mm/min.
ATC 20 tooling
Mall pillow TWIST
Electromandrino 8,000 min-1, 36 KW
interchangeable with
electromandrino of 24,000 min-1, 36 KW
CNC SIEMENS 840D
Its objective is to satisfy needs with finished roughdressing and with light materials with the aeronautical sector, as well as finished of molds and the dies of great dimensions.
In its design the influence of the changes of temperature has been taken care of with mimo and thanks to its symmetrical structure, sheep and car in box-in-box and double spindle manufacturers, is obtained geometric high accuracy. Memphis HS has a Twist mall pillow of continuous turns. The machine offers interchangeable electromandrinos with different characteristics to adapt itself to any necessity of the client.
Powerful and robust it assures a high productivity, providing to the end users products of greater quality and competitiveness. |
|
FLA Series :
The new generation of the FLA series combines the productivity of a milling machine suppliers to the high speed and potential of a movable industrial bridge machining centre.
It is chacterized by high dynamics with all axes; it also features customizable revolver or tool changer cutter-heads for ensuring maximum productivity for sector specific productions.
All this comes with an ideal price/performance ratio. 80 mt/min rapid speed along with up to 0.8 g of X -Y -Z axis acceleration represent the necessary requirements for trimming professional plastic, composite AND WOOD materials, as well as for machining professional light alloys. The modular-designed extensible magazine is standard equipped with 8 stations for Hsk 63F and Hsk 63A and can be widely customized. Among the various optionals, automated loading/unloading systems (rotary tables and parallel loaders) enable a quick tooling of the machining centre. |
|
Standard // Options
- Longitudinal axis: 4.000 mm // 30.000 each 1.000 mm
- Transversal axis: 3.600 mm
- Clearance between columns: 4.000 mm
- Vertical axis: 1.500 mm // 1.750 mm
- Rotary head holder plate ± 180°: Index 2,5° // 1° - 0,5° - 0,01° - axis ±190°
- Tool changer: 20 places // 30 - 40 - 60 - 100 places
- CNC: Heidenhain // Selca - Fanuc - Fidia
- Faceplate plane width: 2.500 mm
- Faceplate plane length: 4.000 mm // 30.000 each 1.000 mm
- Faceplate plane capacity: 100.000 N/m˛ // 150.000 N/m˛
- Manufacturers of spindle: 407 MAS - BT 50
- KW - S1: 30
- RPM: 4.800 // 6.000 - 12.000 - 16.000
- Spindle axis inclination - index: horizontal / vertical // 2,5° - 1° - 0,5° - 0,01° - axis ±135°
- Tool diameter: 125 mm
- Tool length: 350 mm
- Tool weight: 15 Kg // 20 Kg
- Linear axes speed: 20.000 mm/min
- Polar axes speed: 4.000°/min
- Linear axes accuracy: ± 15+3 (L-1.000)/1.000 micron
- Polar axes accuracy: 8" |
|
CONSTRUCTION: Cartesian structure with mobile portal and high rigidity-bridge
STROKE // SPEED
X:stroke from 4.000 to 40.000 mm // 100 m/min
Y:stroke from 4.200 to 8.000 mm // 100 m/min
Z:stroke from 2.000 to 4.500 mm // 70 m/min
A:stroke + / - 120° mm // 40 rpm
C:stroke continuous mm // 40 rpm
POWER ELECTROSPINDLE from 12 to 16 kw
DESCRIPTION: 5 axis Cnc machining centre ideal for machining tri-dimensional parts, such as models, moulds, parts for aeronautics, automotive and yachting industries of big size.
|
|
| Backed by many years of experience in the manufacture of double column bridge type milling stations, Nicolás Correa, has become one of the worldwide leaders with over 400 installations to date. The PANTERA Model offers precision and speediness for machining large and heavy duty moulds, tools and dies. |
|
With the GANTRY CS from handtmann you are ready for the machining tasks of the future. A modular machine design and generous dimensioned professional engines are the basics for a flexibility you require.
An automatic manufacturer of spindle change allows roughing and finishing in one suppliers of clamping without compromises.
Save valuable machining time with the two working zones allowing machining and set up the same time.
|
|
MATRIX - Gantry of medium/big dimensions at high speed with 5 axes
Available in 3 and 5 axes
Gantry structure with double drives
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from metal to the composite materials
Milling spindles for power removals (fino a 267 Nm)
and for finishing machinings at highest speed (fino a 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Specific accessories supply for the aerospace, car machinings and for moulds
High speed roughing out and accuracy finishing with only one positioning
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
The UNIPORT machining centres with a moving portal bridge in X-direction are ideal for large and voluminous products. A characteristic feature of the UNIPORT range is the travelling bridge, which moves across the generously dimensioned fixed table. This concept offers excellent access for easy loading and unloading of components by means of lifting equipment, professional crane etc.
Some UNIPORT models can also be configured with stationary portal bridge and movable table and/or pallet changer.
Uniport 4000: Travelling bridge Cnc machining centre for light duty machining
Uniport 6000: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 6000-P: Portal type CNC machining centre with pallet changer for medium duty machining with right angle head
Uniport 7: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 8000: Travelling bridge CNC machining centre for medium to heavy duty machining with right angle head
Uniport 8000-D: Portal type CNC machining centre in "Twin-Table" configuration for medium to heavy duty machining with right angle head
Uniport 8000-P: Portal type CNC machining centre with pallet changer for medium to heavy duty machining with right angle head
|
|
| ... products without technical information |
| |
The DP/DP coupler interlinks two PROFIBUS DP networks and permits data transmission between the masters and the two DP networks. The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/DP coupler is configured in the S7 professional software or by means of a GSD file.
Features:
° Up to 244 bytes of input data and 244 bytes of output data can be exchanged between two PROFIBUS networks
° Dual-redundant power feeder
° Electrical isolation between the PROFIBUS networks
° PROFIBUS addresses can be set by DIL switch or software |
|
The Serial RapidIO PCI Bridge provides the capability to bridge between Serial RapidIO and PCI. It is part of a family of bridge devices aimed at applications wishing to take advantage of the Serial RapidIO interconnect.
Serial RapidIO is a switched data communication standard developed for the interconnection of devices on the same circuit board or between circuit boards across a backplane at rates in excess of 10Gbps. It has been developed as a more cost-effective, standards based replacement for expensive proprietary busses in high-performance embedded systems, such as networking and communications equipment and enterprise storage.
|
|
| Pericom has designed these high-performance devices for next generation markets that include Switches and Professional routers, Professional servers, HBAs, Data Storage Systems, Professional pcs, Notebooks, Telecom Equipment, Multi-Function Industrial printers, Test Equipment, Embedded Systems, and Professional data acquisition Systems. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category
