|
|
| Okuma Double Column Machining Centers provide a solid, extra rigid foundation for performing accurate machining on extremely large parts let you perform accurate machining on very large parts. With two columns supporting the machine head and our innovative bridge-built architecture, these machines are designed to deliver precision and power. The second column not only provides stability, but also increases the overall size of the machine, allowing you to complete longer and larger parts. The Okuma THINC - OSP control manages the machine for efficiency and accuracy. |
|
MATRIX - Gantry of medium/big dimensions at high speed with 5 axes
Available in 3 and 5 axes
Gantry structure with double drives
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from metal to the composite materials
Milling spindles for power removals (fino a 267 Nm)
and for finishing machinings at highest speed (fino a 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Specific accessories supply for the aerospace, car machinings and for moulds
High speed roughing out and accuracy finishing with only one positioning
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
FLYMILL - High speed and general dynamics: continuous 5 axes milling operations to increase the competitiveness in quality and productivity
Available in 3 and 5 axes
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from the special alloys (InconelTitanium) to the composite materials
Kinematic mechanisms with double drives that enable rapids up to 60 m/min
Milling spindles for power removals (up to 267 Nm) and for finishing machinings at highest speed (up to 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Modular elongation of the Y axis besides the standard axis traverses
Specific accessories supply for the aerospace, car machinings and for moulds
Increase of the quality and accuracy even on pieces with big dimensions
Increase the competitiveness
|
|
MATRIX - Gantry of medium/big dimensions at high speed with 5 axes
Available in 3 and 5 axes
Gantry structure with double drives
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from metal to the composite materials
Milling spindles for power removals (fino a 267 Nm)
and for finishing machinings at highest speed (fino a 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Specific accessories supply for the aerospace, car machinings and for moulds
High speed roughing out and accuracy finishing with only one positioning
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
K2X The machines of Extremes
Very high speed and high precision with 5 axes.
The 5 axes HSM Milling centre HURON K2X Five allows machining in 5 simultaneous axes on 5 faces, from roughing to finition, of all complex workpieces such as injection moulds, aeronautic workpieces or pieces for mechanic branch.
This vertical milling centre has all the qualities to be at the pole position of its category. It gives a great accessibility and offers a good and easy control of the work-station.
The impressive result which associate working speed and accuracy allows to reach very high finishing surfacing qualities.
K2X 8 Five
XYZ 650 / 700 / 450 mm
A 90° (-45° / +180°)
C 360°
Table Ø 500 mm / 250 kg
24.000 rpm - 24 kW - 40 Nm
XYZ = 50 m/min - AC = 50 rpm
|
|
XCEEDER MICRON - Vertical high speed machining centre at high speed and maximum accuracy.
Available in 3 and 5 axes
Direct Drive technology for the rotary tilting table
Basement and RAM in Metalquartz: maximum stiffness and vibration damping
Gantry structure with double motor drives and thermal stabilization of all axes
Linear axes positioning repeatability:: * 0,5 urn
Milling spindles for power removals (up to 137 Nm) and for finishing machinings at highest speed (up to 40.000 rpm)
Total versatility of working materials: from the special alloys (InconelTitanium) to the composite materials
Automation: single or multiple pallet system
ADVANTAGES:
Maximum accuracy machining on 5 sides of the piece with only one pisitioning
Increase the competitiveness
High quality and accuracy of the fine finishing of complex tridimensional surfaces
High efficiency
|
|
Machining center CN
T 858 of Thibaut is a machining center with 5 interpolated axes (continuous). T 858 is a machine of production able to machine parts complex, i.e. at the same time curved, concave or convex, twisted, convex or spherical. Its 5 interpolated axes enable him to complete true work in 3D very varied like vaults, arches, pillars, columns (with option "lathe"), fountain, warheads, lintels, low-reliefs, corbels... work 3D also makes it possible to produce very varied plans, rabbets or profiles, funerary vases, statues, steles, and the reproduction of objects.
In addition to its quasi unlimited versatility, the originality of this machine holds in several points. |
|
1.Massive cast-iron construction is much more than competitors¡¦ models.
2.4-slideway, wide-stance bed structure ensures the machine¡¦s cutting stability.
3.Special design of the tool-release hydraulic cylinder, no external forces will act on the spindle bearings, when tool unclamped.
4.The properly-preloaded and pretensioned ball screws are coupled directly with the servo motor to get the better positioning accuracy. |
|
The 5-axis machining CM 27 has become a synonym for first class
routing operations. This MAKA series allows the three-dimensional machining of any kind of material to be used in the pattern and model making industry as well as castings and light metals.
This series combines sector-specific features with the advantages of a light
machine tool and is used wherever economical heavy-duty machining is
required: by manufacturers of prototypes, in the automotive and rail vehicle
industry as well as by manufacturers of large-scale wooden mouldings or
patterns.
Outstanding feature of the machine is the high flexibility: Routing, sawing,
drilling, thread cutting or -routing can be performed in almost any angle;
a rigid and dynamic design, a high Z axis, a heavy-duty routing unit
as well as well-proven 5-axis technology are only some of the advantages.
The large tool magazine with a deposit for a saw blade allows complete
machining operations with only one clamping. |
|
With proven duoBLOCK® design - for unparalleled flexibility in the sectors aerospace, automotive, mould making, component manufacturing and medical technology. The right solution for every 5-axis machining task: universal milling head with automatic pivot from vertical to horizontal position, combined with the NC rotary table, for easy 5-sided machining. The DMC U series offers various expansion options for 5-axis simultaneous machining, such as the NC rotary table with NC milling head as an A or B-axis, NC rotary table with 5X torqueMASTER® (B-axis) for high volume chip removal, or the NC-swivel rotary table with horizontal milling head as an optional 5-axis solution. The duoBLOCK® series is equipped with a fast rotary pallet changer. The gantry series comes with a linear pallet changer and a rotary magazine, from RS2 (4 pallets) to RS10 (12 pallets in the system), depending on the machine type. In addition, this Mega Milling Centre for 5-axis complete machining has a work area of 16 cubic m³ and a maximum workpiece load of 16 t.
|
|
VERSATECH V Multi-surface, 5-Axis Double Column Machining Centers
The VERSATECH Series of multiple-surface 5-axis double column machining centers are designed to provide unsurpassed productivity in the machining of very large work pieces thanks to a spindle head that can positioned in the vertical and horizontal positions and any angle in between.
|
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information. |
|
Machining centres of the M 7/MM 7 series are designed for highly dynamic
finishing of moulded parts and panel components made of aluminium,
thermoplastics or duroplastics as well as for the machining of hard foam
blocks. The machine concept stands for highly dynamic rigidity and meets the requirements for top machining quality with maximum feed rates.
This series guarantees availability and economic efficiency thus being profitable even for users with small-quantity production. The tandem table technique allows alternating operation and minimizes downtimes for loading and unloading of the workpieces. Both tables can be coupled for the machining of large workpieces. |
|
1.Based on SV-construction and new features.
2.Five-face machining in one set-up.
3.AAC(Automatic Attachment Changer) is designed for improving productivity.
4.Angular attachment features automatic indexing in 90°(optional in 5°).
5. Five-face machining pattern software is standard.
|
|
5 AXIS VERTICAL MILLING MACHINE - EVO PLAST TR
Application: plastic material and similar
Cartesian structure with movable portal
Linear axis:
- Strokes:
X=4000 mm
Y=2000 mm
Z=800 mm
- Maximum speeds: 80 m/min (X-Y), 60 m/min (Z)
- Maximum acceleration: up to 6 m/sec²
- Positioning accuracy: +/- 0,05 mm/m
- Repeatability: 0,03 mm
Rotating axis:
- Rotation: 440° (C), 295° (A)
- Maximum speed: 300 °/sec (C), 200 °/sec (A)
- Positioning accuracy: 60 arcsec
- Repeatability: 20 arcsec
2-3-4 Electro spindles: power 1,5-2 kW (in continuous service S1)
max. speed 24.000 rpm
Rotating table: 2 tables 2500 x 1500 mm
Vacuum pumps. 2 x 100 m³/h
CNC control OSAI 10/510 i
Portable auto teach-in programmable system
Full enclosure |
|
| The new LINEARMILL 600 HD. The ideal solution for dynamic 5-axis machining of medium-sized parts. Highly dynamic linear drives ensure the rapid movement of the cutting tool. State-of-the-art torque motors move the swiveling rotary table powerfully and precisely during operation. Intelligent machine geometry and glass scales in all three axes as a standard fitting guarantee best stability and precision, even during the most difficult cutting jobs. |
|
| The vertical milling centers, developed and manufactured in Chemnitz, have been specifically designed for the tool and die industry. The cross bed conception in connection with efficient, water-cooled motor spindles and a five-axes-control are conditions for a machine concept with high dynamics and highest accuracy. |
|
| ... products without technical information |
| |
|
|
