|
|
The models
C 20 V, U
C 30 V, U, dynamic
C 40 V, U, dynamic
C 50 U, dynamic
C 1200 V
(V (rigid table) - U (NC swivelling rotary table) -
dynamic (highly dynamic version))
of the C series developed by Hermle not only covers the conventional areas of the tool and mold manufacturing, but are also increasingly successful in the production of small and medium batches.
For all applications, where power, accuracy and/or universality are required the C series of Hermle is the perfect solution.
The features that make our machines unique!
-Modified gantry design
-Multifunctional machine bed
-Mineral casting design
-Modular configuration of the table variants and the extensions
-Compact structure / machine can be transported completely assembled
-Greatest possible degree of freedom in the machining area
-High positioning and long-term accuracy
-Modular design, including automation, handling equipment, etc.
An additional machine model, the B 300, is also based on the concept employed for the C Series models and is located below the C Series perfectly. It is the precise entry into 3 to 5-axis technology. With typical Hermle accuracy and quality, no shortcuts were taken. The individual options were adapted to the possible area of application. |
|
Representing the latest generation of UNISIGN vertical machining centres, Unipro 5 combines powerful machining capabilities and highly dynamical machine features with the highest accuracy requirements. These high speed machining centres are the result of a continuing development process, incorporating experiences obtained during the development and manufacturing of vertical machining centres over a period of more than 25 years. This High Speed machining centre is purposely designed for high value applications such as accurate 5-axes simultaneous machining of complex 3D components.
Unipro 5L: High speed vertical Cnc milling centre centre in long bed configuration.
Unipro 5P: High speed vertical CNC machining centre with two work zones for pendulum machining.
Unipro 5S: High speed vertical CNC machining centre in single station configuration.
- Highest dynamical features and accurate contouring capabilities with 60 m/min rapid feed rate
- 8 m/s2 acceleration
- Full enclosure guarding with sliding doors at the front
- Closed loop machine cooling system
- Stationary tool storage with 63 pockets
- Highly dynamical rotating and tilting desk as combined 4th and 5th axis for 3D machining (option)
- Unisign 100 kW supplier of spindle (option), 25000 rpm |
|
Go-Mill 350:
5-Axis Machining center manufacturer for dynamic machining of Blisk, Impeller und Turbine blade.
- Torque-Motors for dynamic machining
- Max. part length 335mm
- Max. part Ø 350mm
- Vertical Spindle
- Tail stock CNC controlled
- Spindle power 16 kw, 20000 rpm, 82 Nm
- Tool magazine 30 tools HSK-63
- Pallet pool 8/16 Positions |
|
Titan is a 5 controlled axes machining centre.
The axes industrial slide (X, Y and Z) on high precision, robust, reliable linear guide-ways (35mm) with recirculating ball blocks with four contacts. The axes movements are controlled by brushless Yaskawa servomotors by means of pinion, rack and mechanical system for backlash recovery for X axis (longitudinal) and high precision ground recirculating manufacturer of ball screw and preloaded lead for Y (transversal) and Z (vertical) axes.
The C and D axes control the electrospindle rotation, positioning its axis in any direction square to the surface of an upper hemisphere.
Standard configuration:
•5 controlled axes: linear X, Y, Z. Rotating C and D axes able to execute machining operations in interpolation
•Automatic tool magazin max 24 tools positioned on sliding carriage
•Electrospindle HSK E50 17,5kW (S6) 19.000 rpm with liquid professional cooling system
•8 vices with 4 independent movements (opening/closing, positioning, locking and traslation) controlled by electric servomotors
•Semi – integral guard with automatic opening of frontal professional doors
•Machine bed and sliding carriage in electrowelded steel
•Machine bad designed for an optimal chip and cooling liquid collection
•Central lubrification fot the members of movement
|
|
| The structure is made of a machine bed with a sliding carriage in its rear section. Both are in electrowelded steel duly stabilized after each work phase to ensure that there is no interior tension; they are sized to guarantee stability and precision during machining operations. |
|
With its innovative pallet changer, Hermle is pioneering in the parallel-to-production setup of its highly dynamic
3-axis, 4-axis and 5-axis supplier of machining centers.
Advantages:
- An innovative pallet changer with 2 CNC axes for the swivelling and rotating movement. It enables quick loading and unloading of the machining center with a maximum table load.
- With this innovative system, free access to the working area of the C 30 / C 40 is maintained.
- Pallet clamp system with high functional safety and precise positioning of the pallets on the machine table.
- Easy-moving and wide-opening revolving doors provide easy access to the setup area. This system allows for large and heavy workpieces to be loaded via professional crane at the setup area.
- Operating elements for automatic workpiece clamping, Emergency Stop button and acknowledgment key are integrated into the enclosure and thus readily accessible to the operator. |
|
Representing the latest generation of UNISIGN machining centres, the UNIPENT 4000 combines powerful machining capabilities in 5 axes with highly dynamical machine features and highest accuracy. The UNIPENT 4000 is the result of a continuing development process over a period of more than 30 years.
The concept of the UNIPENT 4000 is based on a portal machine configuration with a two-sided synchronised drive system in Y-axis, for the movable bridge, and a moving professional spindle carrier with ram in X-axis.
Integrated in the 45° inclined base frame is the rotating and tilting desk for 5-axes machining and positioning of complex components. The inclined front face facilitates easy chip and coolant flow.
The machine is fully enclosed with electronic safety locks on the operator professional doors. A slide way system (option) can open the roof top to enable loading from the top side of the machine.
The stationary tool archive offers space to 69 tools.
A high dynamics package gives the machine accelerations of 10 m/s2 en rapid speeds of 60 m/min in all linear axes. The C-axis speed of the rotating and tilting table is increased to 52 rpm.
A high accuracy package with linear scales in all axes, two in Y-direction for the two-sided drive system, makes the machine predestined to be successfully utilised in manufacturing systems with highest accuracy requirements.
Two direct drive water cooled spindle configurations are available, offering 36 kW and 12.000 or 16.000 rpm for general machining tasks. For high speed cutting the powerful UNISIGN motor spindle, with 25.000 rpm and power output of up to 100 kW, is available.
The UNIPENT 4000 can be completed with a pallet system. |
|
MATRIX - Gantry of medium/big dimensions at high speed with 5 axes
Available in 3 and 5 axes
Gantry structure with double drives
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from metal to the composite materials
Milling spindles for power removals (fino a 267 Nm)
and for finishing machinings at highest speed (fino a 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Specific accessories supply for the aerospace, car machinings and for moulds
High speed roughing out and accuracy finishing with only one positioning
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
Nobody can tell you what machining tasks the future will bring to you but with the PBZ NT from Handtmann you are prepared. Experience the flexibility of a top class profiler.
Professional profile lengths up to 984 inch and the highly flexible clamping system are setting the benchmark for the market. Complete machining from the professional bar stock on all 6 sides as well the high accuracy go without saying.
Do not limit your possibilities with a just normal machining centre. Get flexibility and productivity for today and future tasks with a Handtmann PBZ NT.
|
|
Production units have one disadvantage. They are developed for one special task. For small and middle series, no real solution has been on the market, so far.
With the innovation PBZ® DL from Handtmann we are going to change that. Take profit of a automation without laying down on one part thanks to a new suppliers of clamping technology invented by Handtmann.
Professional insert the professional profiles on the magazine and relax while your finished parts are getting sorted on the other side of the machine. The future in professional production starts today: With Handtmann.
|
|
Modular designed the HSC centre fits your individual needs. Delivered as 4 or 5 axis centre you can reduce your professional production costs thanks to the two working zones allowing set up and machining at the same time.
The flexible vice system from Handtmann allows nearly all professional profiles to be clamped. The moving portal, equipped with box and pinion drives and guided on both sides achieves the accuracy required in the automotive or aerospace industry.
|
|
The UNIPORT machining centres with a moving portal bridge in X-direction are ideal for large and voluminous products. A characteristic feature of the UNIPORT range is the travelling bridge, which moves across the generously dimensioned fixed table. This concept offers excellent access for easy loading and unloading of components by means of lifting equipment, professional crane etc.
Some UNIPORT models can also be configured with stationary portal bridge and movable table and/or pallet changer.
Uniport 4000: Travelling bridge Cnc machining centre for light duty machining
Uniport 6000: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 6000-P: Portal type CNC machining centre with pallet changer for medium duty machining with right angle head
Uniport 7: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 8000: Travelling bridge CNC machining centre for medium to heavy duty machining with right angle head
Uniport 8000-D: Portal type CNC machining centre in "Twin-Table" configuration for medium to heavy duty machining with right angle head
Uniport 8000-P: Portal type CNC machining centre with pallet changer for medium to heavy duty machining with right angle head
|
|
With the GANTRY CS from handtmann you are ready for the machining tasks of the future. A modular machine design and generous dimensioned professional engines are the basics for a flexibility you require.
An automatic manufacturer of spindle change allows roughing and finishing in one suppliers of clamping without compromises.
Save valuable machining time with the two working zones allowing machining and set up the same time.
|
|
FLYMILL - High speed and general dynamics: continuous 5 axes milling operations to increase the competitiveness in quality and productivity
Available in 3 and 5 axes
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from the special alloys (InconelTitanium) to the composite materials
Kinematic mechanisms with double drives that enable rapids up to 60 m/min
Machining center spindles for power removals (up to 267 Nm) and for finishing machinings at highest speed (up to 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Modular elongation of the Y axis besides the standard axis traverses
Specific accessories supply for the aerospace, car machinings and for moulds
Increase of the quality and accuracy even on pieces with big dimensions
Increase the competitiveness
|
|
MATRIX - Gantry of medium/big dimensions at high speed with 5 axes
Available in 3 and 5 axes
Gantry structure with double drives
Direct Drive technology: double rotating head with continuous C axis at high dynamics and power
Total versatility of working materials: from metal to the composite materials
Milling spindles for power removals (fino a 267 Nm)
and for finishing machinings at highest speed (fino a 40.000 rpm)
Automation: - flexible subdivision of the working area - pallet system
ADVANTAGES:
Specific accessories supply for the aerospace, car machinings and for moulds
High speed roughing out and accuracy finishing with only one positioning
Increase of the quality and accuracy of the machined piece
Increase the competitiveness
|
|
TURBOBLISK 1005:
5-axis Ultra-Dynamic HSC Machining center manufacturers for producing Blisks, Impellers and other complex parts.
- g-accelerated machining
- Max. Part dia. 1000 mm (51")
- Suppliers of spindle speed 18000 rpm or 24000 rpm
- Spindle power 44 KW or 30 KW
- Spindle torque 57 Nm (42 ft lb) - 135 Nm (99 ft lb)
- Toolmagazine 30, 60 or 80 tools
- Spindle taper HSK A 63 or HSK A 80
- Palletchanger optional |
|
TURBOBLISK 1306:
6-axis Ultra-Dynamic HSC Machining station for producing Blisks, Impellers and other complex parts.
- g-accelerated machining
- Max. Part dia. 1300 mm (51")
- Spindle manufacturers speed 18000 rpm or 24000 rpm
- Spindle power 44 KW or 30 KW
- Spindle torque 57 Nm (42 ft lb) - 135 Nm (99 ft lb)
- Toolmagazine 30, 60 or 80 tools
- Spindle taper HSK A 63 or HSK A 80
- Palletchanger optional |
|
XCEEDER MICRON - Vertical high speed machining centre at high speed and maximum accuracy.
Available in 3 and 5 axes
Direct Drive technology for the rotary tilting desk
Basement and RAM in Metalquartz: maximum stiffness and vibration damping
Gantry structure with double motor drives and thermal stabilization of all axes
Linear axes positioning repeatability:: * 0,5 urn
Machining spindles for power removals (up to 137 Nm) and for finishing machinings at highest speed (up to 40.000 rpm)
Total versatility of working materials: from the special alloys (InconelTitanium) to the composite materials
Automation: single or multiple pallet system
ADVANTAGES:
Maximum accuracy machining on 5 sides of the piece with only one pisitioning
Increase the competitiveness
High quality and accuracy of the fine finishing of complex tridimensional surfaces
High efficiency
|
|
SATELLITE XL
5-axis Cnc machining centre with moving gantry structure. Designed for drilling, milling, thread cutting and cutting on bars or workpieces of aluminium, PVC, light alloys in general and steel. The moving part of the machine consists of a gantry with precision housing and pinion drive. The high power (10Kw in S1) electrically-driven spindle manufacturers with HSK40F tool holder allows machining operations, including heavy duty work, with optimum results in terms of speed and accuracy. A 9-place tool magazine is installed behind the moving gantry structure. The 300 mm blade is housed separately. The machine can be used in double mode so as to minimize machine downtime, as it is possible to change the workpiece (load/unload) in "concealed" time. It is also possible to load and consequently machine, workpieces whose codes and machining operations differ between the two work areas. The gantry is provided with a guard which, besides protecting the operator, also reduces the noise impact on the environment. |
|
EuroMod base units are ready-to-use CNC systems with a great ease of use for a large number of tasks and applications that can be automated.
Rigid, low vibration steel and aluminium constructions made of isel system profiles and system elements are the mechanical basis for the EuroMod base units. The isel ball screw drives with steel supplier of spindles 16 x 5 mm, used in the positioning axes, provide for high precision.
When developing the EuroMod base units, the focus was especially put on a small space requirement.
All base units need a floor width of only 1,160 mm. The dimensions in depth are:
800 mm, 1,100 mm and 1,510 mm. |
|
The Mytrunnion-5 is a simultaneously controlled 5-axis machine with an X, Y & Z axis, and additional tilting A-Axis (150 deg. / -120 to 30 deg.) and a rotary C-Axis (360 deg.) with a 0.001 deg. minimum indexing command. Machining of high precision, complicated parts is completed in one operation, reducing the overall machining process.
Standard Features Include:
#40, 20,000rpm 4-Step Geared, Dual Contact Manufacturers of spindle
Linear balance Feedback on All Axes
Rotary Industrial scales on A & C Axes
Coolant Thru the Spindle
Double Decker Style Swarf conveyor & Filtration System
50 Tool ATC
Tool presetter & Breakage
Wash & Shower Coolant
Oil Mist Spray System
Fanuc 16iMB Control with Added 5-Axis Machining Functions
Ultra high precision (positioning +/-0.000039", repeatability of +/-0.00002").
An optional 2-station automatic pallet changer is factory installed and allows the operator to approach from the front end of the machine in order to set-up or unload one pallet while the other is being machined. Easy accessability and smooth automatic pallet change design with full enclosure offers the operator a safe work environment to perform in-process inspection while the machine is in cycle. This newly developed option offers the flexibility of increased spindle utilization coupled with the potential to connect with Flexible Manufacturing Cells in the future for 5-axis unmanned machining potential.
|
|
| Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid industrial bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle manufacturers speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime. |
|
K2X The machines of Extremes
Very high speed and high precision with 5 axes.
The 5 axes HSM Milling centre HURON K2X Five allows machining in 5 simultaneous axes on 5 faces, from roughing to finition, of all complex workpieces such as injection moulds, aeronautic workpieces or pieces for mechanic branch.
This vertical milling centre has all the qualities to be at the pole position of its category. It gives a great accessibility and offers a good and easy control of the work-station.
The impressive result which associate working speed and accuracy allows to reach very high finishing surfacing qualities.
K2X 10 Five
XYZ 900 / 900 / 450 mm
A 90° (-45° / +180°)
C 360°
Table Ø 630 mm / 500 kg
24.000 rpm - 24 kW - 40 Nm
XYZ = 50 m/min
A = 50 rpm - C = 90 rpm |
|
|
