|
|
|
Okuma Double Column Machining Centers provide a solid, extra rigid foundation for performing accurate machining on extremely large parts let you perform accurate machining on very large parts. With two columns supporting the machine head and our innovative bridge-built architecture, these machines are designed to deliver precision and power. The second column not only provides stability, but also increases the overall size of the machine, allowing you to complete longer and larger parts. The Okuma THINC - OSP control manages the machine for efficiency and accuracy.
|
|
Design principle
* Modified gantry design, the disadvantages of the conventional gantry design have been avoided
* Three axes in the tool, thus workpieces independent dynamics, ideal pre-requisite for rapid traverses and feed up to 30 m/min.
* Drives and guideways outside/above the working area Z axis with electrical and mechanical quick stop against uncontrolled drop
* Compact design, thus little space required
* Complete transport
* No foundation required (3-point-support)
* Optimised static and dynamic properties
* Maximum utilisation, positioning and long term accuracy
* Short positioning and start times on account of high acceleration of 5 m/s2
|
|
|
|
|
|
The UNIPORT machining centres with a moving portal bridge in X-direction are ideal for large and voluminous products. A characteristic feature of the UNIPORT range is the travelling bridge, which moves across the generously dimensioned fixed table. This concept offers excellent access for easy loading and unloading of components by means of lifting equipment, crane etc.
Some UNIPORT models can also be configured with stationary portal bridge and movable table and/or pallet changer.
Uniport 4000: Travelling bridge CNC machining centre for light duty machining
Uniport 6000: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 6000-P: Portal type CNC machining centre with pallet changer for medium duty machining with right angle head
Uniport 7: Travelling bridge CNC machining centre for medium duty machining with right angle head
Uniport 8000: Travelling bridge CNC machining centre for medium to heavy duty machining with right angle head
Uniport 8000-D: Portal type CNC machining centre in "Twin-Table" configuration for medium to heavy duty machining with right angle head
Uniport 8000-P: Portal type CNC machining centre with pallet changer for medium to heavy duty machining with right angle head
|
|
NMV 3000 DCG is a high-precision, 5-axis control vertical machining center that uses DDM on the rotary axes, and achieves the highest productivity in 5-axis machining.
A large-capacity AWC (Automatic Workpiece Changer) with small pallets is available as an option.
* Uses Octagonal Ram Construction (ORC) with superior vibration control to ensure high rigidity
* Achieves stable accuracy thanks to the heat-symmetrical structure
* Uses Top Box-in-Box Construction which eliminates overhang
* Outstanding accessibility, operability and ease of use for easier setups
* B and C axes with the fastest rotary axis drive system, which achieves zero backlash
* Driven at the Center of Gravity (DCG) minimizes vibration, and maximizes acceleration
|
|
= NMV5000 DCG =
Three cutting-edge technologies for outstanding performance.
The NMV5000 DCG 5-axis control vertical machining center, equipped with Mori Seiki's original technologies: DDM(TM)(DirectDrive Motor), which achieves zero backlash and is produced in-house for maximum reliability, DCG® (Driven at the Center of Gravity), which controls vibration and improves acceleration, and ORC(TM) (Octagonal Ram Construction), which offers highspeed, high-precision feed.
It can complete all the machining in one clamping, except for the part being gripped, and achieves high-efficiency, high-quality machining of complex-shaped workpieces.
This state-of-the-art 5-axis control machine is equipped with all our cutting-edge technologies, to respond to the need for the increasing need complex workpieces.
|
|
|
|
|
|
= NMV8000 DCG =
Three cutting-edge technologies for outstanding performance
The NMV8000 DCG 5-axis control vertical machining center is equipped with Mori Seiki’s original technologies: DDMTM (Direct Drive Motor), which achieves zero backlash and is produced in-house for maximum reliability; DCG® (Driven at the Center of Gravity), which controls vibration and improves acceleration; and ORCTM (Octagonal Ram Construction), which offers high-speed, high-precision feed.
The NMV8000 DCG, the second model in this series, has a workpiece swing diameter of 1,000 mm and loading capacity of 1,000 kg. It can complete all the machining in one clamping, except for the part being gripped and achieves high-efficiency, high-quality machining of complex-shaped workpieces.
As well as the No. 40 taper which was available for the NMV5000 DCG, we have prepared a No. 50 taper. The fact that customers can choose the ideal spindle for the target workpieces is one of the machine's main attractions.
This latest 5-axis control machine equipped with all our cutting-edge technologies will meet customers’ increasing needs for machining of complex workpieces.
|
|
|
|
|
|
Perfect surface at highest precision.
Combines the advantages of a precision milling machine with the dynamic of a HSC-(High Speed Cutting) milling machine.
With its compact and easy accessible design the PICOMAX 60 is suited in fact for every factory. This machine concept combines the qualities of a precision milling machine with the dynamics of a HSC-milling machine.
The solid and rigid machine base with its massive vertical supporting stand has been grated from the very beginning in such a way to match the 5-axes machining. Whether in precision mechanics, mould and die production or in machine construction: these machining centres accomplish most versatile applications due to our decade of experience and consistently refined machine concept.
The difference is just like as visible as perceptible and measurable.
Characteristics and highlights:
- Liquid-cooled spindle. Select from 14'000 / 20'000 / 26'000 / 36'000 or 42'000 rpm
- Pick up tool changer with magazine for 20 or 24 tool pockets, respectively tool changer with double gripper and magazine for up to 48 tool pockets
- Silent and vibration-free running of the machine (even for high speeds) is ideally suited for small work parts.
- Optimal stability and high precision provide for jig boring machine quality
- Universal, versatile and flexible Heidenhain CNC control
- All-digital drive technology
- 4-/5-axes machining with automatic dividing attachments
- Very compact with low space requirement
- Practice-orientated accessibility
|
|
K2X The machines of Extremes
Very high speed and high precision with 5 axes.
The 5 axes HSM Milling centre HURON K2X Five allows machining in 5 simultaneous axes on 5 faces, from roughing to finition, of all complex workpieces such as injection moulds, aeronautic workpieces or pieces for mechanic branch.
This vertical milling centre has all the qualities to be at the pole position of its category. It gives a great accessibility and offers a good and easy control of the work-station.
The impressive result which associate working speed and accuracy allows to reach very high finishing surfacing qualities.
K2X 8 Five
XYZ 650 / 700 / 450 mm
A 90° (-45° / +180°)
C 360°
Table Ø 500 mm / 250 kg
24.000 rpm - 24 kW - 40 Nm
XYZ = 50 m/min - AC = 50 rpm
|
|
|
|
|
|
Bridge type design with 2 axes rotary table integrated into the X-axis
High dynamics and high stiffness of rotary axes with torque drives ==> Dynamic 5 axes machining available
Feed rate 0 - 30 000 mm/min
Milling spindle standard 42 000 rpm, 14 kW, HSK E40,
maximum tool diameter 16 mm
Table surface diameter 405 mm, large pallets from System 3R, Erowa and others can be used
Swivelling range -2° to 92°
Turning range unlimited
Machining range X axis with horizontal positioned table across the whole table; With vertical positioned table up to 300 mm (12 in.) above the table surface
Machining range Y axis Across the whole table and to the tool changer
Machining range Z axis 300 mm, maximum height above horizontal positioned table is 350 mm for a tool with a total length for tool and tool holder of 110 mm
Tool changer 26 stations, including laser for tool measuring
Choice between environmentally friendly spray cooling or standard coolant
Overpressure air system for temperature stabilisation of the machine
Optimal removal of chips with a conveyor
Particularly good view into and access of the machining area
Crane loading is possible
Workpiece weight max. 125 kg
Machine weight 7 t (15400 Ibs)
Space requirements (mm) 2350 x 4500 x 2700
|
|
|
|
|
|
Fourth axis designed as rigid swivel axis. Particularly suitable for machining the sides of high workpieces with small internal radii
Fifth axis optionally available as mounted rotary table
Patented sealing of all machine elements, therefore also ideally suitable for machining of graphite and other dust-creating abrasive materials without retooling, additional extraction equipment and other forms of restrictions.
Temperature stabilisation of the complete machine frame for highly accurate production, water-cooling of bearings and spindle nuts as well as the milling spindle by means of an extra cooling sleeve.
Integrated chip conveyance - simple disposal
Accessibility of the work area is particularly easy from 2 sides and visibility is excellent
Environmentally-friendly spray cooling - no disposal necessary
Part loading with crane possible, front door opens roof
Automatic loading of pallets and / or tools is possible with a robot by means of a door at the front
Tool changer - dust protected and with integrated laser measuring equipment
Laser measuring equipment for length and diameter measuring as well as checking and profile determination of the milling tool in use.
Digital drives with Sercos interface
2 encoder systems, with high resolution in each axis for greatest accuracy and dynamic response.
Control technology, matched to the mechanical system of the machine, for movement completely free of contour variations
Machining precision depends on the application
Workpiece probing with Infrared 3D probe for fast setting up
|
|
On the basis of the technology implemented in its large-sized 5 axes machining centres, Huron has developed a new concept of a revolutionary HSC 5 axes milling centre, which is extremely fast, precise and powerful.
The combination of the linear and rotating axes in a structure wih gantry fixed and moving table makes ft possible to machine into 3, 4 and 5 simultaneous axes specifically for complex parts mirth a maximum of productivity in milling and turning. The part is fixed on the pallet, laid out on the bi-rotative table, can
pass from the horizontal position to the vertical position and all the Intermediate positions by combination of the 2 continuous rotating axes A andC.
MX4, High performance rates to lowi cost with increased profitability to production usage.
|
|
|
The Biesse operating unit with 5 interpolating axes gives a valid alternative to the use of cumbersome and expensive aggregates. It also cuts machining times by reducing the number of tool changes required. It is mainly destined for use in the made-to-measure furniture and joinery industries. Its use on processing centres in the Rover C range, which are designed to machine solid wood, means that the possible applications can be further extended thanks to the extensive and complex processing. It is one of the 5 axes units milling more compact on the market: it uses the elevated power of his electrospindle for little dimensions too, thanks to the "Double-Power" technology. Every solution on the range Rover C has been planned reserving the maximum attention to the requirements of our customers, in order to render every operation easy and intuitive to execute.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining
|
|
The AZ 150 is a high-accuracy and high-efficiency vertical machining center to mill molds or small-sized-parts with nano level accuracy.
Being equipped with counter balance axes to control vibration and also the change of weight position, th AZ 150 can perform excellent and high-accuracy machining for both surface finish and profiles.
|
|
The SR 5-axis machines tackle complex, multi-sided parts with a B-axis swivel head and C-axis rotary table design. The Hurco SR machines include a special version of WinMax® control software that streamlines setup and simplifies programming for complex parts.
Features & Options:
Coolant/ Chip Removal
- Chip Conveyor
- Coolant Screen System
- Flood Coolant
- High Pressure CTS
- Telescopic Way Covers
- Top Dome
- Wash Down Gun and Air Gun
- Wash Down System
Spindle/ Motor
- High Speed Servo Systems
- Low Air Pressure Switch
- Motor Brake in Z-Axis
- Spindle Chiller
Tooling/Accessories
- Tooling and Vises
- Trunnion Tables
- Rotary Tables
Frame/Cabinet
- Air Conditioner
- Door Interlock
- Dual Work Lights
- E-Stop Button on Control Head
- Easy Access Side Door with Latch
- Fully Contained Tool Storage
- Linear Glass Scales (X, Y, Z)
- Linear Rails
- Lube Oil Separator
- Power Cabinet Heat Exchanger
- Solid One Piece High-Grade Cast Iron Bed
|
|
A mill-turn centre integrating all the modern functions of a turning centre and a 5-axis machining centre.
This centre is mainly designed for the realization of turning, drilling, milling and tapping operations carried out in only one work-holding operation, following any direction.
The machine is able to stand important loads thanks to its GRANITAN base offering high thermal and dynamic stability, and thanks also to its 8" main headstock and tailstock on front slant bed, thus improving the swarf draining-off.
The workpiece-holder headstock is fitted with a turning spindle with a 360,000-position indexing system (C-axis).
|
|
| ... products without technical information |
| |
|
|
