|
|
Multi-stage vertical electric pumps of minimum overall dimensions, suitable for lifting plants with or without tank, irrigation systems and everywhere you need to reach higher pressure.
PERFORMANCES DATAS
93 models divided in 5 series with powers from 0,75 up to 30 kw.
Performances at 2900 rpm:
Q max: 40m3/h
H max: 315m
Temperature of the pumped liquid: min 0°C max +90°C.
TOLERANCES
Pump UNI EN ISO 9906 Appendix a
Motor: IEC 60034-1
|
|
APPLICATIONS
Compact multistage vertical electric pumps, suitable for lifting installations with or without autoclaves, fire-fighting installations, irrigation systems and wherever elevated pressures are required.CHARACTERISTICS
G20 cast iron spider.
G20 cast iron base.
X5CrNi1810 stainless steel pump pipe.
Thermoplastic polycarbonate diffusers.
Thermoplastic polycarbonate impellers.
AISI 431 stainless steel shaft.
Mechanical seal: sliding faces in hard metal, seals in ethylene propylene rubber.
EPDM rubber bushings.
Stainless steel sleeves with ceramic lining.SPECIFICATIONS
Maximum temperature of liquid 50°C.
Max. operating pressure 16 bar.
In-line connectors available on request, can be coupled to counter flanges.
Fitted with standardised vertical motor sized according to UNEL 13118; V8 arrangement; protected to IP55, class F insulation.
|
|
|
Vertical multistage centrifugal pumps for delivery of clean or slightly polluted liquids. Cantilever construction. Designed for tank installation. Immersion depth up to 800mm. Main fields of application: environmental protection technology, surface technic, filtration technic, coolant supply and as booster pumps. Synthetic versions for aggressive chemicals.
|
|
Single-stage vertical centrifugal pumps, suitable for transfer, recycling and distributing corrosive liquids and chemicals. The AS-series pumps are recommended for installation in cisterns, tanks or wells with variable head.
Materials: PP, PVC, PVDF, PE-HD.
Up to 3 meters long, depending upon the tank depth.
Suitable dimensioning of shafts, support columns and motor supports.
Nozzles with hose adaptor threaded or flanged.
Free of bearing bracket or intermediate bearings, it is guided by a pair of filled PTFE, ceramic or SiC wear bushings, and flushed by the liquid being pumped.
|
|
|
The vertical centrifugal pumps made in resin are high efficiency pumps for fixed installations with the pump immersed directly in a tank, operated by an electric motor in direct drive (max. 3000 rpm) for rapid emptying of fluid, with a flow rate of from 16 to 55 m3/hour. The particular form of construction of this pump, in addition to not using internal mechanical seals (subject to high wear), guarantees that any accidental leakage of the fluid is collected in the tank. The open rotor allows very dirty fluids, with an apparent viscosity of up to 500 cps (at 20°C) and small sized suspended solids, to be pumped with a continuous flow. The choice of the pump's composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without forgetting the correct temperature field.
|
|
The Metso Minerals VF froth pump has been designed to increase the pumpability of frothy suspensions. The principle of operation is similar to that of hydro- cyclone separation.
Air is separated from the slurry in a vortex created by the impeller rotation and the tangential inlet to the pump ’s conical sump.This results in more efficient pumping at higher capacities and a smooth operation, free from pulsations caused by airlocking.
Summary of design features
Integrated unit for layout flexibility
Smooth operation of the open vortex created in the sump and vertical "wet end" inlet prevents air locking
Cantilever design does not require submerged bearings or shaft seals
Bearing assembly with double protection sealing
arrangement to prevent ingress of slurry
Wear parts are available in a variety of different materials
Simplified maintenance
|
|
Characteristics
- Multi-stage vertical centrifugal pumps with diffuser type bowl.
- Francis vane enclosed impellers.
- Counter clockwise rotation viewed from coupling end (as an option).
- Basket or Conical strainer according to pump requirements.
Design Features
- Product or Oil lubricated.
- Large bowl shaft sizing provides longer life.
- Enameled bowls 5" thru 15".
Applications
- Deep Well & Irrigation.
- Sumps, Condensate (Can Pump).
- Fire Service.
- Municipal.
- Industrial.
|
|
|
|
|
|
MULTI V/NEXIS V
Overpressure
BEACHES Of USE
Flows until: 140 m3/h
Heights mano. until: 240 m
APPLICATIONS
- In the processes of the trades of water and them
derived applications:
- skid of membrane filtration
- unit of disinfection by U.V.
- adduction, overpressure, transfer...
- washing high pressure
- protection fire
- swimming pool
- In agriculture:
- watering, irrigation
Pumped fluids
- Standard Range: nonaggressive clear liquids (drinking water, glycolée water...)
- Range 316L: aggressive liquids (sea water, demineralized water, chlorinated water...)
ADVANTAGES
- Hydraulic Whole out of stainless steel
- Optimized Reliability: outputs raised thanks to the profile of the wheels, limiting the number of stages, the size of the trees and thrusts
- Easy Installation: openings In line
- Process of disassembling/particularly easy reassembly
- Range 304: nonaggressive clear liquids (clear liquids and neutrals)
- Range 316L: aggressive liquids (sea water, demineralized water, chlorinated water...)
- Mechanical seal cartridge out of standard following model
|
|
|
TN Series pumps are designed to cover a wide range of pumping applications. They can handle thin and heavy liquids containing abrasives and bits of solids, while maintaining consistent and dependable flow. Except for 24" and 36" models, pumps are designed so that there are no bearings or seals in the liquid, making them virtually maintenance-free.
|
|
|
With high delivery rates and heads, FLUX centrifugal immersion pumps combine maximum efficiency with a robust and reliable construction, resulting in a pump that provides the ultimate in process security, especially for transferring corrosive or abrasive fluids. Main fields of application are the chemical industry, chemical engineering, electroplating, PCB manufacturing, fresh and waste water treatment.
|
|
Goulds Model 3910 API 610 (OH3) vertical in-line pump provides benefits of low installation costs and space savings...without compromising reliability, maintainability, safety or hydraulic performance.
Back Pull-out for ease of maintenance.
Bearing Frame carries pump loads.
FramehookTM allows safe and easy removal of back pull-out assembly (patented).
Standard Spacer Couplings used for all applications.
In-Line Design for space and cost savings.
Motor Support Rugged fabricated steel, maintains positive shaft alignment. Available motor support. Unique frame-mounted motor support improves maintenance access.
Capacities to 7500 GPM (1700 m3/h)
Heads to 750 feet (229 m)
Temperatures to 650° F (343° C)
Pressures from full vacuum to 595 PSIG (41 bar)
|
|
Everything at Lutz revolves around safety and environment protection. Our centrifugal pumps guarantee the safe transfer of aggressive, corrosive and other hazardous acids and bases.
Lutz centrifugal pumps B50, B6 and B80 are particulary suited for the electroplating industry, waste water treatment, chemical industry, water conditioning and gas scrubbers.
The different sizes, types and material combinations of the vertical submerged pumps provide the range needed to cover all applications.
- Delivery rate up to 160 m³/h
- Delivery head up to 65 m
- Immersion depths up to 3000 mm
- Mousing materials: PP, PVDF, PVC or Stainless Steel
|
|
TCH. TCT, TCA pump series are available for vertical installation with lateral discharge flange.
The main design features are:
Lengths are from approximately 500 mm to 3000 mm with or without intermediate support sleeve.
Available materials of constructions are same as for the horizontal mounted pumps.
Depending upon the applications the sleeve bearings can be carbon, bronze or impregnated
Teflon materials.
Pump casing, impeller and casing cover are the same as for the series TCH, TCT, TCA.
The standard rectangular base can be modified to accommodate specific requirements.
Standard shaft sealing is by radial seal rings. Packed stuffing box or mechanical seal shaft sealing are available upon request.
Lantern for monoblock design is available for B5 or V1 motors up to 110 kW.
Internal sleeve bearing flushing is standard but provision for flushing from an outside source is provided.
Filter screen can be fitted at suction side upon request.
|
|
Applications:
Surface treatment
Transfer of chemicals
Agitation of chemical tanks
Cosmetics industry
Salt water
Metallurgy
Vertical design: Assembly immersed in bath
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser:
Very good efficiency
Max. flow rate up to 23 m3/h
Max. pump-out height up to 19 m
Impeller driven by a back-balanced, bearing-less drive shaft (T50/200 and T72/202) No gaskets ; no risk of leaks
No wearing parts
Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201): No gaskets ; no risk of leaks; Drive shaft height up to 756 mm
Version with counter-impeller (T72/242) Operation possible outside bath
|
|
Pumped Liquid
Lube oils
Main Fields Of Application
Main lube oil pumps for diesel engines in shipbuilding and stationary power stations
|
|
ALG series single stage single suction pipeline centrifugal pump are designed by scientific and technical personnel of our company and domestic water pump experts, which select the domestic excellent hydraulic model, adopt the performance parameter of the centrifugal pump of Model IS. Besides, according to different using temperature and medium, we develop pumps applicable for hot water, high temperature the corrosive environment, oil transporting on the basis of Model ALG
- Suitable for industry and city's giving and draining off water
- It is convenient to form a complete set with other apparatus
- High efficiency, low noise
- There are cold water types, hot water type, high temperature type, chemical industry type, oil type
- Performance is reliable
- International standard
|
|
Vertical Multistage Electric Pumps
SV Series SV 2, SV 4, SV 8, SV 16
Market sectors
civil, agricultural, light industry, water treatment, heating and air conditioning
Market sectors
- Handling of water,free of suspended solids,in the civil, industrial and agricultural sectors
- Pressure boosting and water supply systems
- Irrigation systems
- Wash systems
- Water treatment plants
- Handling of moderately aggressive liquids, demineralized water,water and glycol,etc.
- Circulation of hot and cold water for heating,cooling and conditioning systems
- Boiler feed
Materials
- Suitable for handling potable water (WRAS certified)
|
|
* Bearing-free, sealless design for leakproof, trouble-free operation.
* Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids.
* Stainless steel exterior hardware.
* Handles temperatures to 210°F (99 C).
* Corrosion resistant, fan cooled motors.
* Twin impeller design for high volume circulation and leakproof operation.
* High strength molded pump body for vibration free operation annd extended pump life.
* Portable for easy transfer between working areas.
* Easy maintenance.
* Convenient mounting panel for easy mounting to tank.
* Ideal for OEM applications.
* Made in U.S.A.
|
|
Vertical centrifugal immersion pumps
Seal lots and safe to run dry Solid plastic vertical centrifugal immersion pumps are used predominantly space-saving by direct installation into industrial environments. For strongly crystallizing media, centrifugal immersion Pumps are supplied with a special seal to avoid the penetration of steam and the connected crystallization. Standard depths of immersion are ranging from 200 mm up to 500 mm. Depths of immersion up to 1000 mm are possible by the means of an intermediate bearing
Fluids delivered:
- Acids, bases and mixtures
- Solvents
- Alkaline degreasing baths
- Electroplating baths
- Foto chemicals
- Radioactive, aseptic and precious liquids
- Food stuffs
- Other low-viscosity fluids
Fields of application:
- Electroplating
- Etching and cleaning plants
- Refrigerating machines
- Solar systems
- Sewage and water treatment
- Foto industry
- Textile and food industries, etc.
|
|
|
|
|
|
The centrifugal immersion pumps of building group 4 are used for wet-pit operation in containers, pits and tanks. Centrifugal immersion pumps for dry-well installation, i.e. to be installed and operated outside the container, are also available.
All components of pumps in plastic design that are in contact with the fluid are made of PP or PVDF. The pump shaft consists of a motor shaft made of stainless steel and a shaft-protecting tube of either PP or PVDF. Built-in elastomers are made of FPM (or also EPDM without surcharge). Centrifugal immersion pumps are equipped with overhang shafts so that there is no need to provide for shaft bearings in components that are in contact with the fluid. Thus, the pumps are safe to run dry and do not require regular service and maintenance.
There is no need of a mechanical sealing of the shaft. Only a so-called gas seal is installed beneath the motor to prevent aggressive vapours from penetrating the motor chamber. But this seal is never in contact with the fluid delivered.
- For aggressive and neutral liquids
- For short-term and continuous operation
|
|
Type: single-stage, single-flow, open impeller
Head: up to 35 m
Flow rate: up to 800 m³/h
Pressure: up to 10 bar
Temperature: up to 60°C
|
|
SPP Pumps have been manufacturing fire pumps for over 130 years with one of the widest range of approvals of any manufacturer in the world. Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SPP UL Vertical In-line range of fire pumps approved for fire protection by Underwriters Laboratories and fully compliant with NFPA 20.
The SPP line of vertical in-line fire pumps are lightweight and compact for smaller pump rooms. They eliminate the need for coupling alignment and there are fewer lost or misplaced parts.
|
|
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).
SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter
|
|
|
|
|
|
C.R.I MV Series Vertical multistage in-line centrifugal pumps are axial suction & radial delivery non-self priming pumps available in various capacity, types of MOC and port connections to best suit the applications. As the suction and discharge ports of these pumps are in the same horizontal axis, this system ensures one pipe horizontal installation and compact pipe connections using the same pipe dimensions. The impellers, diffusers and shaft of these pumps are made up of AISI stainless steel and designed to deliver best possible hydraulic efficiency.
These pumps are powered by a C.R.I. totally enclosed fan cooled, A.C induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration and noise free operations. Shaft is made of quality steel, precision ground of ample size for transmitting the rated Horsepower. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate motor protection control panel.
|
|
|
|
|
|
C.R.I MV Series Vertical multistage in-line centrifugal pumps are axial suction & radial delivery non-self priming pumps available in various capacity, types of MOC and port connections to best suit the applications. As the suction and discharge ports of these pumps are in the same horizontal axis, this system ensures one pipe horizontal installation and compact pipe connections using the same pipe dimensions. The impellers, diffusers and shaft of these pumps are made up of AISI stainless steel and designed to deliver best possible hydraulic efficiency.
These pumps are Powered by a totally enclosed fan cooled, A.C induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration and noise free operations. Shaft of ample size made of quality steel and precisely ground is used for transmitting the rated horse power. All single-phase motors are incorporated with thermal protector. These pumps require an adequate motor protection control panel.
|
|
|
|
|
|
Application
These pumps are suitable for various purposes such as water supply system in industrial plants agriculture and sprinkler irrigation systems, Air conditioning plants, pumping fuel, edible oils and condensates.
Design
General
KSM low pressure, self regulating pumps consists mainly of four elements.Volute casing with stuffing box.
Impeller.
Suction Cover.
Bearing Pedestal.
Volute Casing
Casing consist of axial suction and radial discharge branch, which passes through the center line in vertical which ensures the balance of the liquid being pumped.
Stuffing Box
It is integrally cast with the volute casing and is readily accessible for the insertion of gland packing the pump can also be provided with mechanical seal.
Impeller
The impeller is of radial type with double curvaflire vanes, over hung type. The impeller is statically and dynamically balanced. with balancing holes.
Bearing Pedestal
There are basically two types of bearing pedestals which cover the ranges of pumps.Type I & Type 2. In all pedestal designs two robust deep groove ball bearing are provided for the shaft to take up radial and axial loads.
In case of heavy duties type 2 pedestal is used which has thicker shaft and larger outer diameters bearing.
|
|
Operating Limits:
-For clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
-Liquid temperature:
Normal temperature type:-15¡ÆC¡75¡ÆC
Hot water type:70¡ÆC¡120¡ÆC
-Max. ambient temperature:40¡ÆC
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
|
|
THE VSMP PUMPS
The Vertical Sealless Motor Pumps series of sealless single or multistage centrifugal pumps is mainly for use with combustion gases like methane, high suction pressure gases like Carbon dioxyde, expensive gases like Argon, where all risks of gas leakage of the process gas contamination are eliminated.
The main feature of these pumps are:
Maximum level of safety with LNG (gas tight)
Flowrate up to 2'500 L/min
Single or multistage: differential head up to 1'000 m
Available for all cryogenic gases including LNG, except Oxygen for safety reasons
|
|
|
Under the SP fluid the dregs thick liquid pumps forthe verticalcentrifugal dregs thick liquid pumps, plunges underthe fluid, uses into transport the abradability, the thick pellet, the highlyconcentrated dregs thick liquid. Does not need any axis to seal withthe axis seals the water, is insufficient in the absorption quantityunderthe operating mode also can the normal work. SP pumps has flowed the part to be made by the wear-resisting metal. SPR pumps plunges underthe fluid the spare part to bring the rubberouter lining, is suitable to transporting the non- edges and cornersthe abradability dregs thick liquid. According to the dregs thick liquid pond liquid level height, maychoose the different length the pump driving shaft orthe inductionpipe. Uses the many kinds of speeds and the many kinds of aberrations way.causesto pump underthe best operating mode moves, service life long.the movement benefit is high, can satisfy many kind ofbadtransportations condition.
|
|
Features :
WIDE RANGE OF
APPLICATIONS:
- Industrial Process
- Corrosive Liquids
- Paint
- Waste Water
- Chemical Slurries
CAPABILITIES:
- Capacities to 3000 GPM
- Heads to 230 Feet
- Temperature to 400 d. F
- Pump Length to 6 feet
- Shaft Diameter to 5"
CONSTRUCTION:
- Cast Iron
- 316 Stainless Steel
- Alloy 20
- Hastelloy
- CD4MCu
|
|
|
|
