|
|
Goulds Model 3910 API 610 (OH3) vertical in-line pump provides benefits of low installation costs and space savings...without compromising reliability, maintainability, safety or hydraulic performance.
Back Pull-out for ease of maintenance.
Bearing Frame carries pump loads.
FramehookTM allows safe and easy removal of back pull-out assembly (patented).
Standard Spacer Couplings used for all applications.
In-Line Design for space and cost savings.
Motor Support Rugged fabricated steel, maintains positive shaft alignment. Available motor support. Unique frame-mounted motor support improves maintenance access.
Capacities to 7500 GPM (1700 m3/h)
Heads to 750 feet (229 m)
Temperatures to 650° F (343° C)
Pressures from full vacuum to 595 PSIG (41 bar)
|
|
Everything at Lutz revolves around safety and environment protection. Our centrifugal pumps guarantee the safe transfer of aggressive, corrosive and other hazardous acids and bases.
Lutz centrifugal pumps B50, B6 and B80 are particulary suited for the electroplating industry, waste water treatment, chemical industry, water conditioning and gas scrubbers.
The different sizes, types and material combinations of the vertical submerged pumps provide the range needed to cover all applications.
- Delivery rate up to 160 m³/h
- Delivery head up to 65 m
- Immersion depths up to 3000 mm
- Mousing materials: PP, PVDF, PVC or Stainless Steel
|
|
TCH. TCT, TCA pump series are available for vertical installation with lateral discharge flange.
The main design features are:
Lengths are from approximately 500 mm to 3000 mm with or without intermediate support sleeve.
Available materials of constructions are same as for the horizontal mounted pumps.
Depending upon the applications the sleeve bearings can be carbon, bronze or impregnated
Teflon materials.
Pump casing, impeller and casing cover are the same as for the series TCH, TCT, TCA.
The standard rectangular base can be modified to accommodate specific requirements.
Standard shaft sealing is by radial seal rings. Packed stuffing box or mechanical seal shaft sealing are available upon request.
Lantern for monoblock design is available for B5 or V1 motors up to 110 kW.
Internal sleeve bearing flushing is standard but provision for flushing from an outside source is provided.
Filter screen can be fitted at suction side upon request.
|
|
Applications:
Surface treatment
Transfer of chemicals
Agitation of chemical tanks
Cosmetics industry
Salt water
Metallurgy
Vertical design: Assembly immersed in bath
Pump body made of injected plastic (Polypropylene or PVDF) Excellent resistance to strong acids and bases
Max. fluid temperature = 80°C (PP), 110°C (PVDF)
Closed centrifugal pump impeller with diffuser:
Very good efficiency
Max. flow rate up to 23 m3/h
Max. pump-out height up to 19 m
Impeller driven by a back-balanced, bearing-less drive shaft (T50/200 and T72/202) No gaskets ; no risk of leaks
No wearing parts
Impeller driven by a long drive shaft with ceramic / ceramic bearing (T101/201): No gaskets ; no risk of leaks; Drive shaft height up to 756 mm
Version with counter-impeller (T72/242) Operation possible outside bath
|
|
Pumped Liquid
Lube oils
Main Fields Of Application
Main lube oil pumps for diesel engines in shipbuilding and stationary power stations
|
|
ALG series single stage single suction pipeline centrifugal pump are designed by scientific and technical personnel of our company and domestic water pump experts, which select the domestic excellent hydraulic model, adopt the performance parameter of the centrifugal pump of Model IS. Besides, according to different using temperature and medium, we develop pumps applicable for hot water, high temperature the corrosive environment, oil transporting on the basis of Model ALG
- Suitable for industry and city's giving and draining off water
- It is convenient to form a complete set with other apparatus
- High efficiency, low noise
- There are cold water types, hot water type, high temperature type, chemical industry type, oil type
- Performance is reliable
- International standard
|
|
Vertical Multistage Electric Pumps
SV Series SV 2, SV 4, SV 8, SV 16
Market sectors
civil, agricultural, light industry, water treatment, heating and air conditioning
Market sectors
- Handling of water,free of suspended solids,in the civil, industrial and agricultural sectors
- Pressure boosting and water supply systems
- Irrigation systems
- Wash systems
- Water treatment plants
- Handling of moderately aggressive liquids, demineralized water,water and glycol,etc.
- Circulation of hot and cold water for heating,cooling and conditioning systems
- Boiler feed
Materials
- Suitable for handling potable water (WRAS certified)
|
|
* Bearing-free, sealless design for leakproof, trouble-free operation.
* Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids.
* Stainless steel exterior hardware.
* Handles temperatures to 210°F (99 C).
* Corrosion resistant, fan cooled motors.
* Twin impeller design for high volume circulation and leakproof operation.
* High strength molded pump body for vibration free operation annd extended pump life.
* Portable for easy transfer between working areas.
* Easy maintenance.
* Convenient mounting panel for easy mounting to tank.
* Ideal for OEM applications.
* Made in U.S.A.
|
|
Type: single-stage, single-flow, open impeller
Head: up to 35 m
Flow rate: up to 800 m³/h
Pressure: up to 10 bar
Temperature: up to 60°C
|
|
SPP Pumps have been manufacturing fire pumps for over 130 years with one of the widest range of approvals of any manufacturer in the world. Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SPP UL Vertical In-line range of fire pumps approved for fire protection by Underwriters Laboratories and fully compliant with NFPA 20.
The SPP line of vertical in-line fire pumps are lightweight and compact for smaller pump rooms. They eliminate the need for coupling alignment and there are fewer lost or misplaced parts.
|
|
Every wetted component in a Vanton SUMP-GARD® vertical pump, including the heavy-wall shaft sleeve, is offered in PVC, CPVC, PP, PVDF, and other non-metallic materials compatible with the pumped fluid. This eliminates corrosion and minimizes abrasion, resulting in lower maintenance, longer pump life, and contamination-free products. SG pumps are configured for sumps to 50 ft. (15 m) deep, and handle flows to 1450 gpm (330 m3/hr), heads to 245 ft. (85 m), and temperatures to 275°F (135°C).
SUMP-GARD pumps are ideal for the transfer and treatment of process fluids, plant effluents and industrial or municipal water and waste streams. They are available with vortex pump heads to pass sludges, slurries and stringy materials as well as fluids with solids to 3 inches (75 mm) in diameter
|
|
API 610 9th edition, fully compliant VS4 pump!
The Model 3171 is the Veteran vertical sump and process pump. Thousands of installations in industrial process, sump drainage, corrosive liquids, pollution control, molten salts attest to the 3171's remarkable performance. Simple mounting.
Self-Priming
Rugged Double Row Thrust Bearing
Heavy Duty One-piece Shaft
External Impeller Adjustment
Available in a Wide Range of Alloys
Open Impeller Design
Vapor Proof Option: Choice of packing, mechanical or fluid sealing methods to seal sump vapors
Capacities to 3180 GPM
(722 m3/h)
Heads to 344 Feet
(105 m)
Temperatures to 450° F
(232° C)
Pit Depths to 20 Feet (6 m)
|
|
NL type sewage and slurry pump
- widely applicable
- can be used for draining flooded fields and fighting droughts
- durable、wearproof
- pleasing shape
- convenient maintenance
- as simple ambulatory fire fighting pumps in the village
- widely applicable
- safe and reliable
|
|
APPLICATIONS
* CIVIL AND INDUSTRIAL WATERS HANDLING PLANTS
* PRESSURIZZATION PLANTS
* WATER SUPPLY FROM RAIN WATRE TANKS OR RESERVOIS
* SPRINKLER SYSTEMS
* FOR APPLICATIONS REQUIRIG OPTIMISED PUMP SILENCE AND MOTOR COOLING FEATURES
DESIGN ENGINEERING
* OIL BATH MOTOR (BIODEGRADABLE AND DIELECTRIC) FOR COOLING AND BEARING LUBRIFICATION
* DOUBLE MECHANICAL SEAL:
ENGINE FACE: OIL BATH
PUMP FACE: WATER BATH
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS.
* CLASS “F” INSULATION.
* MAX. PUMPED LIQUID TEMPERATURE: 50°C
|
|
Construction
- Vertical column sump pumps, with motor in dry installation and with pump body submerged in the liquid handled (without suction line or foot valve).
Impeller:
- VAL: free-flow impeller (vortex or recessed impeller).
- SC: open impeller.
Applications
- For draining a basin or a sump with domestic or industrial sewage.
- For slightly dirty waste water, for liquids which are non-aggessive for the pump materials.
|
|
|
The EPG TSP Submersible Pump with level sensor mount is designed with the small diameter vertical well in mind. This pump can be used to pump groundwater, leachate, and other contaminated liquids. It is able to be installed in wells as small as four inches in diameter. When used in conjunction with EPG's LevelMaster Level Monitoring Control System the benefits of continuous accurate monitoring and control of liquid levels in a small diameter well are achieved.
|
|
Bearing Free, Sealless 316 Stainless Steel Vertical Pumps
Designed for Corrosive Liquid Applications
The “ZSX series” stainless steel vertical pumps are completely corrosion resistant and are recommended for transferring, recirculating and agitating a wide range of chemical, laboratory and industrial process applications.
Like our popular “ZDX” series, these stainless steel models incorporate a unique opposing twin-impeller design. The design feature provides high volume circulation and eliminates leakage up the pump column. No bearings or seals permit dry running without damage.
The pumps are engineered to provide flows up to 100 GPM (378 LPM) and pressures up to 68 TDH (20 M). All wetted parts are precision manufactured from 316 stainless steel.
|
|
NEMO® Immersible Pumps are used for emptying barrels, tanks, and pits. They are also used where space is limited and the danger of cavitation may be present. In addition, these pumps are suitable for emptying barrels containing materials hazardous to water and the environment.
Features of the NEMO® BT Immersible Pump:
- compact design
- high pressure stability
- low-pulsation conveyance
- high suction capability
NEMO® BT Immersible Pump offers you:
- immersion depths of up to 15,000 mm
- low life cycle costs
- high efficiency
- high variety of shaft sealing systems
- easy serviceability
Advantages of the NEMO® BT Immersible Pump
- can be operated under high conveying pressures and at high capacities
- capable of pumping a great variety of substances
- capacities can be adjusted proportionally
- four different geometries for adjusting to the given application
|
|
SP Submersible Borehole Pumps
Applications: Water supply, irrigation and dewatering duties for domestic, commercial, municipal and industrial applications
Duty range: Flows to 280m³h
Heads to 620 metres
Temperature range: 0°C to +40°C
Connections: 1¼" to 6" BSPF
Borehole sizes: 4" to 12"
SQ Compact 3" Submersible Pumps
Applications: Borehole water supply for domestic/light commercial use
Duty range: Flows to 9.8 m³h
Heads to 200 metres
Temperature range: 2°C to 40°C
Pressure rating: 16 Bar
Pump connections:
Borehole size: 1¼"/1½" BSPF
3"
|
|
* Applications:
Wet Pit,Agriculture,Chemical Processing,Effluent,Sump Service,General Purpose,Water Treatment,Hydrocarbon Processing,Recycling Services,Environmental Services
* Industries:
Water Handling and Treatment,Waste Processing,Utilities,Auxiliary,Miscellaneous Services,Water Treatment,OEM
* Standards:
* Misc:
Optimized Lineshaft/Shaft Bearing Design complies with API 610 spacing requirements, virtually eliminating shaft failure and extending Mean Time Between Planned Maintenance (MTBPM).
Externally Adjustable, Semi-Open Impeller minimizes clogging and reduces costly downtime.
Rigid Coupling with fully enclosed impeller adjusting mechanism, protected from environmental fouling, allows simple external setting of impeller.
Double Row External Thrust Bearings prevent pump developed loads from being transmitted to the motor, avoiding costly motor failures.
|
|
Offering state-of-the-art hydraulics, CPXV ISO vertical sump pump is designed for applications where high performance, superior efficiency and low NPSH are required. CPXV ISO pumps conform to ISO 5199 design criteria.
* Flows to 1400 m3/h (6160 gpm)
* Heads to 250 m (820 ft)
* Pressures to 25 bar (365 psi)
* Temperatures from -40°C (-40°F) to 350°C (660°F)
|
|
The Model 3171 is the Veteran vertical sump and process pump. Thousands of installations in industrial process, sump drainage, corrosive liquids, pollution control, molten salts attest to the 3171's remarkable performance. Simple mounting.
Specifications:
Capacities to 3180 GPM (722 m3/h)
Heads to 344 Feet (105 m)
Temperatures to 450° F (232° C)
Pit Depths to 20 Feet (6 m)
|
|
EPG’s SurePump Vertical Sump Drainer (VSD) pumps contaminated liquids for recovery, leachate collection, gas condensate removal, and sampling applications. It can be used in aggressive environments. Other designs may fail while EPG Vertical Sump Drainers are still going strong. EPG backs the vertical sump drainers with a one year warranty effective the date of installation.
- Stainless steel construction
- Corrosion resistant
- E-Glide bearings for extra durability
- Teflon seal rings
- Franklin Electric motor
- Sealed unit with liquid flow drawn past motor for cooling
- Facilitates drawdown to the very bottom of the vessel
- Chemical resistant jacketed CP motor lead
- Vent valve system purges air from the sump drainer preventing pump air lock
- Flow rates available from 2 - 1,200 gpm
|
|
The U 3 K (S) is an extremely versatile submersible pump for stationary and portable use. EIP technology for safer operation, integrated flushing device for reducing deposits and integrated low level pumping for preventing flooding are only a few of the innovative features that set this pump apart.
- 10 mm free passage
- discharge branch 1¼"
- Hmax = 7 m
- Qmax = 6,5 m3/h
|
|
|
Sethco sump pumps are used for corrosive services; chemical processing, waste treatment, acids and alkalies, chromic acid wastes, salt water, and fume scrubbers.
|
|
|
|
|
|
SCHMITT-Centrifugal Pumps
T and TE range: Vertical sump pumps
The impeller in this range of pumps is driven by extended, free-moving shafts. This method of construction eliminates the need for bearing and shaft sealing.
The temperature threshold of the materials used in the pumps´construction are as follows: 95°C max. for PVDF
- 80°C max. for PP
- 150°C max. for stainless steel
These models are available with a choice of electric drive motors: three-phase or single-phase and three-phase explosion protection or flameproof enclosure drives. All drives can be adapted to work off any voltage or frequency. The characteristic curves of these models have been measured using three-phase double pole 50 Hz motors, with water as a test medium, at a temperature of 20 °C.
Advantages:
- No risk of damage from fluid depletion
- The pumps in this range come equipped with a flange that allows them to be easily mounted on tanks, containers etc.
Some uses and applications:
- Exhaust filtering, gas purification in laboratories
- Sump draining
- Galvanic baths
- Large-scale bakeries
|
|
|
All Vanton vertical centrifugal sump pumps are specifically designed to handle corrosive, abrasive and hazardous process fluids, wastewater liquids and slurries of various pH values, and for use in those applications where no metallic or other contaminants can be tolerated. The cantilevered large diameter shaft design of SGK pumps eliminates the necessity for any immersed bearings and permits dependable operation under dry running conditions. These pumps are available in lengths to 5 feet but can accommodate deeper sumps through the use of tail pipes. Models are available with standard semi-open or closed impellers, or with recessed impellers that provide unrestricted flow so that fluids with solids or stringy materials can be pumped without impeller clogging.
|
|
Vertical Industrial
Turbine Pump
Flows to 70000 GPM (4760 m3/Hr)
Heads to 3,500 feet (1,060m)
Pressures to 2500 psi (75kg/cm2)
Bowl sizes from (6" to 55")
Temperatures to 500° F (260° C)
Horsepower to 5000 HP (1860 KW)
Design Advantages
Fabricated discharge head and flanged column.
Flanged bowl construction.
416SS shafting.
Alloy construction with external flush of critical wear areas available for corrosive/abrasive services.
Built-in alignment and simple piping for less costly installation and ease of maintenance/ reduced downtime.
Services
Cooling Water
Seawater and River Water Intake
Industrial Process Pumps
Utility Circulating Water
Condenser Circulating Water Pumps
Ash Sluice
|
|
Features
* High efficiency impellers and bowls
* Vibration-free performance
* Low submergence
* No priming required
* Dry pit/Wet pit arrangement available
* Direct drive/Right angle gear drive
* Impeller pull-out/Non-pull-out
* Bowl pull-out/Non-pull-out
* Gland packed / Mechanical seal
* 50Hz / 60Hz availability
Applications
* Water supply
* Irrigation
* Cooling tower
* Thermal and Nuclear power plants
* Steel, Cement industries
* Refineries
* Sea water on off-shore platforms
* Condensate extraction
* Fire fighting
* Flood control
* Dry Docks
Range
* Delivery size up to 2200 mm
* Capacity up to 40,000 m³ /hr
* Head up to 200 metres
|
|
|
|
|
|
Griswold Vertical Turbine Pumps are available with two types of pump drives . . . vertical hollowshaft electric motor drive or right angle gear drive. Our turbine pumps offer you a choice of two types of lubrication . . . either a water lubricated line shaft or an oil lubricated line shaft construction.
To fit various applications, Griswold discharge heads are available either cast for above ground discharge or fabricated for various discharge configurations. Depending on pumping requirements, our pump bowls are available in 6”, 8”, 10”, 12” and 14” diameter.
Impellers available in the various bowl assemblies are of different designs and sizes. All impellers are precision designed, engineered and finished to give highest efficiency. Our impellers are made of high-strength bronze, machine, hand finished and dynamically balanced for top performance and long life.
We manufacture a large variety of impeller and bowl designs. This makes it possible for us to fit most any job from 60 to 3500 gallons per minute . . . low or high head . . . open or pressure discharge.
|
|
|
|
