|
|
|
|
|
|
The SOMAI external pneumatic vibrators are characterized by sturdiness, a long life, safety and a practical and simple use.
They are the best offered on the marker of pneumatic vibration.
Strict selection of materials, the anti-wear treatment, the most accurate execution and control are the guarantee of our vibrators.
Our vibrators are distributed in the whole world and used even under the hardest conditions, i.e. in very hot or very cold climates, in prefabrication works, in tunnels and readworks.
Special features:
- While the vibrator is operating there is the possibility to regulate the power and frequency of the vibration. This prevents the extremely dangerous resonance frequencies and allows to obtain high-quality manufactures with an excellent degree of finish;
- simple and safe fixing by means of cradle vices or bolts;
- execution without bearings (free rotors); the moving parts are of special steel and treated against wear so that they require very little maintenance and reach a long operation life;
- operation with compressed air, which guarantees the highest degree of safety and accident prevention.
|
|
Compact Shaker systems are pneumatically driven feeder/beltless conveyor systems. These systems are ideal for the stamping industry or other parts transfer and scrap removal applications.
6 base models
½ to 2 ½ inch Bores
Tray loads to 50 pounds
Maximum loads to 140 pounds
As compared to traditional conveyor systems, Compact “shaker” systems save time and money.
|
|
|
The VMAX Linear Vibrator operates with low noise levels and high force outputs and accommodates the most demanding of applications. Special end mounts, dual ports and a totally enclosed housing make it one of the most unique linear vibrators on the market. With a state-of-the-art piston design, the VMAX linear vibrator does not require a spring to start and is centrifugally balanced, which prolongs the life and increases the force output over conventional models. The VMAX vibrator comes in a variety of sizes to suit almost every application, big and small.
|
|
Cast iron body
Cylinder and piston in treated and rectified steel
Single effect running
Working pressure 6 bars
|
|
|
|
|
|
MARTIN® VIBROLLER™ Pneumatic Roller Vibrators
MARTIN® VIBROLLER™ Roller Vibrators provide a simple, efficient, economical vibration source with only one moving part.
Rugged Construction
Hardened tool steel roller produces 10 vibrations with each rotation.
Economical to Operate
Boosts flow at modest operating cost.
No Bearings, Shafts, or Vanes
Simple design provides dependability and low maintenance.
Selection to Fit Application
Nine models and sizes; one to match your needs.
Using the power of applied vibration, MARTIN® Engineered Vibration Technologies energize material, reducing friction against container walls as well as internal particle-to-particle cohesion. The material moves more freely, feeds more effective, sorts more consistently, compacts more efficiently, and handles more easily.
Martin Engineering makes bulk materials handling cleaner, safer and more productive, with engineered systems including conveyor belt cleaners, conveyor load zone/transfer point chutes, impact cradles and slider beds, skirtboard sealing systems, air-supported belt conveyors, air cannons, pneumatic (air) and electric industrial/bin/railcar/truck vibrators, belt training/alignment devices, dust suppression/collection/control systems, and specialized contract services including installation/maintenance and silo/bin/bunker cleaning.
|
|
VT range silencious (- 60 dba)
Anodised aluminium body
Steel flanged
Turbine with special profil
Reduce air consumption
Variation of frequency and amplitude according to air delivery or air pressure.
|
|
Our name is SOMA!, and for forty years we have been producing vibrators for industry and the construction sector at our plant at CISLIANO (Mi).
Aside from well known electric motor-vibrators and the compressed-air plate type, we also produce various other types of vibrators specially deisgned for particular industrial needs.
|
|
|
|
|
|
MARTIN® MP3 Railcar Vibrator
Martin Engineering's lightweight MP3 Railcar Vibrator provides quiet power to improve hopper car unloading. It comes with a unique urethane wedge bracket that reduces noise and makes mounting easy.
Improves Unloading
Air-operated linear vibrator provides up to 1000 pounds (4400 N) of power to unload the most stubborn materials.
Gives Your Back a Break
Easy-to-handle vibrator with bracket weights only 33 pounds (15 kg)™about half the weight of other railcar vibrators.
Easy on Your Ears
Urethane shoe minimizes noise; at only 80 to 85 dBA, it is much quieter than other railcar vibrators.
Saves Your Energy
Air-efficient design consumes only 15 cfm at 90 psi (425 l/min at 6.2 bar) to reduce your operating costs.
Easy on Your Wallet
Economical price means fast ROI for your operation.
Using the power of applied vibration, MARTIN® Engineered Vibration Technologies energize material, reducing friction against container walls as well as internal particle-to-particle cohesion. The material moves more freely, feeds more effective, sorts more consistently, compacts more efficiently, and handles more easily.
Martin Engineering makes bulk materials handling cleaner, safer and more productive, with engineered systems including conveyor belt cleaners, conveyor load zone/transfer point chutes, impact cradles and slider beds, skirtboard sealing systems, air-supported belt conveyors, air cannons, pneumatic (air) and electric industrial/bin/railcar/truck vibrators, belt training/alignment devices, dust suppression/collection/control systems, and specialized contract services including installation/maintenance and silo/bin/bunker cleaning.
|
|
Maintenance reduced to minimum
Variation of frequency and amplitude according to air delivery or air pressure
Linear vibration issued by a piston in move on air cushion.
|
|
These vibrators generate directed vibrations perpendicular to the mounting plane. They are ideal for feeding balances because they stop instantly after switching off.
Applications:
- Vibrating
- Loosening
- Compacting
- Conveying
- Feeding
|
|
|
Types: CPL, FP and CVL the vibrations are generated by a piston deadened by air cushion. These vibrators are quiet 1 - with BALL (standard K) 2 - with TURBINE (standard WP) 3 - with ROLLER (types R and DAR) the vibrations are generated by the action of the ball, of the turbine or of the roller turning in their cage under the action of the pressure of the compressed air Types CFP and FKL the “CFP” generate successive shocks by the action of a piston of Ø 30, 45 or 75mm the “FKL” generate a powerful shock each time. They must be coupled with an electromagnetic sluice gate 3 ways controlled by automat or a cyclic timer.
|
|
|
The ELECTRO-PERCUTEURS GENERATE SHOCKS WHICH MAKE IT POSSIBLE PRODUCT SE TO TAKE OFF OF the WALL AND OF the VIBRATIONS WHICH HELP It A TO RUN OUT the STUNT BOXES ARE NECESSARY TO the OPERATION OF the ELECTRO-PERCUTEURS. THEY TRANSMIT A the ELECTRO-PERCUTEUR OF the VERY SHORT IMPULSES, SYNCHRONISEES WITH the CURRENT FOR an OPTIMUM RESULT. . THEY ALLOW to A the OPERATOR TO REGULATE the RATE OF STRIKING (3 to 30 impulses/min.) . TRANSPARENT LID, INDICATORS OF CONTROL, ENTRY PLANNED FOR AN EXTERNAL REMOTE CONTROL… (Cyclic Timer, Timer, Contact of detector, etc)
|
|
Features:
- Output voltage regulation
- Range adjustement proportional to set value
- Smooth activation, two preset times
- Adjustment of the minimum and maximum output voltage via separate potentiometers possible
- Different versions for the adaptation to your individual requirements
- Level scanning system and part overflow controller
- Feeder drive and sensors: plug-in types
|
|
|
|
|
|
Multiformat vibrating bowl for perfume pumps : crimped pumps, crimpless pumps, screw-on pumps, clinch-on pumps (for deodorant cans), mini-pumps, drop dispensers / checkers.
Achieve high speeds without the use of air jets with the new generation of patented PKB vibrating bowls.
It is extremely easy to use and format changeover is very easy and quick using only one bowl for all of the different types of perfume pumps.
Benefits :
- high speeds : up to 160 units/minute
- no air jets : no compressed air, reliability, repeatable format changeovers, reduced noice, reduced operating costs
- great sorting quality and great respect for the integrity of the items being dispensed all due to the effective design of the specialized vibrating bowl, dedicated exclusively to perfume pumps dispensing
- quick and extremely simple format changeover, no bowl to change, minimal adjustments and tool use, easy to empty bowl
- multiformat universal rail guide
- 60-minute running time
- industrial production of all components particularly the format parts (100% manufactured)
- very robust, low maintenance.
|
|
|
Magnetic vibrators are suitable as drives for vibration conveying conduits and pipes, vibrating filters, water-removal equipment, worm conveyors and vibrating tables. As impact vibrators for silos, bunkers, deflection grills, downspouts, chutes, filters and filling plants, they provide for a smooth material flow. Whether in the case of bunker settlement, draining, screening, dedusting or protection filter, whether with extraction of large volume quantities or in case of special tasks within process engineering, such as e.g. blocking, dosing, feeding, cooling, warming and drying, AViTEQ magnetic vibrators reliably perform their work in every case. Use our long-standing experience with vibration conveying technologies in all sectors.
|
|
Technical Info:
- Bowl sizes range from 6” to 34”
- Bowl materials include stainless steel, plastics and aluminium
- Feed rates of up to 1,000ppm depending on product shape and size
- Multiple frequency control via the Autovibe digital controller
- Reduced noise, air and power consumption
- FDA approved materials and coatings
- Products handled include razors, syringes, needlesets, metal and plastic caps and bottles, drip chambers, pen components, spark plugs, tablets, contact lens blisters, spoons, general medical components and plastic mouldings
|
|
Features on demand:
Internal coating .
P and L with special size.
Materials used:
-Painted steel.
-Stainless steel.
Optionals:
Nylon version for small containers
|
|
Syntron® Vibrating Tables are designed to settle and compact dry bulk materials in various types of containers. Their application provides either a sizable increase in the net weight of the container or reduction in the container size with subsequent savings in shipping and storage space.
Syntron Vibrating Tables are available in three types: electromagnetic, electromechanical and pneumatic. The choice of the proper type and model depends upon the characteristics of the material or objects being handled and its reaction to vibration, the maximum weight to be handled and the type of container.
To order a printed catalog for this or other products, click on the following link:
|
|
Vibrating bases series F
6.000 vibrations per minute
Features:
Power supply: 230 V - 50 Hz on demand
110 V - 50/60 Hz
|
|
Standard units or tailor made to suit. Powered rollers can be included if the unit forms parts of an automatic moulding plant. Inverter controls for vibratory motors is an option to give variable vibration force.
- Frame raises and lowers when required.
- Rollers can be manual or powered
- Protective shroud prevents sand contamination to motors and lift mechanism.
|
|
Ideatec’s expertise combined with 31 years’ experience in this sector will help you to reach your part feeding and orientation objectives, using vibratory bowl feeders.
Equipment used for part feeding and orientation :
Vibratory bowl feeders
Feeder bowls :
- from 120 mm to 2500 mm
- cylindrical, tiered, conical
- steel, stainless steel, polyamide, resin
|
|
Almco offers a High-Energy (HE) Bowl Series featuring shorter time cycles and increased action, when production dictates. "HE" Series bowls have design efficiency and multiple advantages:
- High-impact vibration with increased amplitude control of both upper/lower counterweights
- Two-dimensinoal control of both impact stroke and mass progression
- New concept "Mass Roll" with strategic parts positioning
- Parts/Media unloading efficiency via high-energy mass rotation and action
- Steel media parts processing and unloading capability
With Almco's natural contour molded urethane-lined tub, parts stay immersed in mass to give either gentle or aggressive deburring. While both the media and parts rotate in an upswept angular clockwise movement, constant cleaning is accomplished through the dual, replaceable urethane drain plates aided by the constant spray system. Removable center dome is an optional accessory.
|
|
Vibrating table (sizes: 620x420x215) with a visible variator of frequency (0/100 Hz) inside. Automatic controls in front of the table Stainless steel carter (option).
Vibrating table (sizes: 410x400x235) with separate box. Automatic controls in front of the table.
|
|
Features:
- Compaction of bulk materials in containers
- Vibrating tables with a vibrating motor or an electromagnetic vibrator
- Table surfaces from 0,1 to 4 m²
- Circular vibrations, directed vibrations and instant stopping, depending on the application
- Design tests can be performed at our pilot plant owing to the large number of applications
|
|
|
Unbalanced motors are suitable as drives for vibration conduits and pipes, vibrating and bar grate filters, vibration funnels and vibrating tables, worm conveyors or water removal equipment. As vibrators for silos, bunkers, deflection grills, downspouts, chutes, filter, filling plants, they guarantee a smooth material flow. Whether in gravel drainage, screening, dedusting or filters, with the conveying of large volume quantities or in case of special tasks involved in process engineering, such as e.g. concrete compaction, dosing and material loosening, AViTEQ unbalanced motors perform their work reliably in every case. Take advantage of our more than 50 years of experience in vibration conveying technologies in all sectors.
|
|
|
Frequency converters from 14 to 200 has - 42 V - 200 Hz for electric vibrating needles 42 V - 200 Hz
|
|
| ... products without technical information |
| |
|
|
