|
|
Thermoset MIVI 8003 ensures an on-line viscosity measurement of any fluid at a required reference temperature.
PRINCIPLE :
The fluid is permanently drawn from the process brought at the required reference temperature, its viscosity measured, then re-injected in the main line.
ADVANTAGES :
No extra installation
Short response time: 2 to 5 min
Insignificant maintenance : day / year
Small size
Reliable and accurate
Usual power : mains and pressurized air
Optional density measurement
Simple, Rugged
Exproof approval : ATEX EEx d IIB T4...T6
OPERATING CONDITIONS :
Maximal temperature at the cell: 200 C
Reference temperature: according to the requirement
Maximal inlet pressure: 16 bar
Maximal outlet pressure: 40 to 120 bar according to product viscosity
MEASUREMENT RANGE : (at reference temperature):
1 100 mPa.s ; 10 1000 mPa.s ; 100 10 000 mPa.s |
|
| ... products without technical information |
| |
Fast and accurate readings from bearings, blocks, and other solids. Mincos spring-loaded holder ensures solid contact in drilled holes and has a built-in oil seal. The sensing probe features a copper alloy tip for quick response to temperature changes.
- Tip-sensitive RTD probe for use to 260C (500F)
- Spring-loaded holder with fluid seal
- Cast iron, stainless steel, or aluminum connection head
|
|
Examples:
-Screw-in resistance thermometers with connecting cable (90.2005)
for temperatures from -50 to +400C
as single or twin resistance thermometer
in 2-wire, 3-wire or 4-wire circuit
connecting cable in PVC, silicone, Teflon or with metal braiding
-JUMO PROCESStemp Resistance thermometers for process technology with ATEX approval in stainless steel with 2-wire transmitter (HART/Ex) for temperatures from -200 to 600C (90.2820):
for temperatures from -200 to 600C
with protection tubes in stainless steel, titanium, tantalum, Inconel and Hastelloy
available with 2-wire transmitter (4 - 20mA / HART) in Ex version
Ex II 1/2 GD EEx ia II C T1 - T6 IP 6x T80 - T400C
Ex II 1/2 GD EEx d II C T1 - T6 IP 6x T80 - T400C
with replaceable measuring insert
|
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
Just send us your inquiry and we will supply you with a detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Humidity Sensors
- Thermocouple Connectors
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Transmitters
|
|
Install these compact sensors anywhere for accurate point sensing and fast response. All Thermal-Tab modules use a thin-film RTD element. All Thermal-Ribbon models conform to EN60751 Class B tolerance when ordered with a PD platinum element.
- Fast response surface sensing in aerospace, medical and industrial devices
- Rugged lamination construction
- Polyimide, silicone rubber or Mylar insulation |
|
CHARACTERISTICS
General use sensor. Working temperature range -200C to
+850C.
Connexion to the process can be adjustable through compression
fitting, free insertion without coupling, or thermowell.
Removable measuring unit, RUM model.
Ceramic support, optional transmitter 4...20 mA.
Complying DIN 43760 standard.
APPLICATIONS
- Industries
- Laboratories
- Food sector
- Sanitary sector
SPECIFICATIONS
Process connexion BSP, NPT, METRIC, ETC...
Sensor tube diameter 3, 4, 6, 8... 15mm
Sensing element Pt100
Connexions 2, 3 and 4 wires
Accuracy CLASS A or B (option 1/3, 1/5, 1/6, 1/10DIN)
Measurement range -200C to +600C (option 850C) |
|
The Omnigrad range of Temperature Products from Endress Hauser meets the high standards required by the process industry.
Omnigrad provides Endress Hauser quality in design, documentation, logistics and service in Temperature Sensors.
A Resistance Temperature Detector (RTD) is a temperature responsive device based on a predictable resistance change in the sensing element.
The EN 60751 standard specifies requirements for industrial Platinum resistance sensors and covers the Pt 100 thermometers.
The Pt 100 sensing element has a resistance of 100 %u03A9 at 0C.
According to EN standard and most common industrial applications, the Pt 100 type sensors are used for temperature measurement and control in the range from -50C to 400C or -200C to 600C.
RTDs offer three main advantages:
high accuracy
excellent long-term stability
high signal output level which allows transmission over long distances without ancillary equipment.
Basic construction of Platinum resistance elements cannot be used directly in contact with process environments, hence the complete thermometers are built as assemblies which can withstand light, medium and heavy duty industrial conditions.
In general, the sensor assembly includes three components:
the resistance thermometer inset
the protecting tube (thermowell)
the terminal housing.
|
|
Roessel resistance thermometers for particular applications:
- Grooved resistance thermometers
- Temperature sensors for heat quantity meters, government-certified
- Resistance thermometers for ocean vessel shipyards, GL-certified
- Resistance thermometers for the plastics industry |
|
Temperature sensor
- resistance and thermoelectric temperature sensors
- for various branch of industry ( cement industry, energy industry, food industry)
- measuring temparature: from -200.. to 1600C
- Atex certificate
Temperature transmitters
- Head-mounted and rail-mounted temperature transmitters
- output signal: 4-20mA or Hart protocol (model LI-24)
- Atex certificate. |
|
| The Model 2A Thermocouple Sensor tube consists of a tube containing a filament heated by the passage of a constant current. A thermocouple is welded to the center of this heated element thereby providing a means of directly measuring the element temperature in terms of voltage output. For any constant value of current through the filament, the temperature of the filament increases as the pressure in the tube is reduced. The thermocouple voltage is directly proportional to the increased temperature of the filament, and thus generates an increase in voltage. Sensitive circuitry includes the thermocouple output directly in microns. The standard sensor tube has nickel-plated, forged-brass housing which makes it capable of withstanding 150 psi overpressure. All thermocouple elements are preoxidized under controlled conditions to provide interchangeability of tubes without recalibration. This process also provides high stability and minimizes the effect of contamination. Stainless steel versions are available. |
|
| The Ni1000SOT is a nickel thin film resistance temperature detector (RTD) that is suitble for use in contact temperature sensing. The characteristics of the temperature sensor comply with DIN 43760. The Ni1000SOT is manufactured by PVD-depositon on a silicon substrate. The thin film structure is covered by a passivation layer for environmental protection and enhanced stability. The nickel elements are mounted on lead frames and encapsulated in SOT23 packages. This technology allows the production of miniature, low cost, high precision temperature sensors. The Ni1000SOT sensor is qualified for the most demanding automotive applications (including exposure to hot oil) and is suitable for many more applications in harsh environments. |
|
| ... products without technical information |
| |
Multifunction meters from AHLBORN are suitable for the adaption of various sensors and are able to measure and store the data of nearly all physivcal, chemical and electrical variables. Also sensors with a non linear output signal are adaptable. Sensor specific linearisations can be programmed easily by the user. The linearisation will be stored inside the intelligent sensor connector. Between 5 to 9 sensors are adaptable depending on instrument version. The devices are easy programmable via menue guided displays. The indication of up to 3 measuring values is possible on the large, illuminated display. The indication can be also a grafic or a measurement list. The measurement values can be stored in the device or directly be transfered to a PC, either per cable or wireless. Complete software programms are available for professional data acquisition. The company AHLBORN offers with its flexible dataloggers and multifunction devices many possibilities for each kind of application and measurement task. The ALMEMO measurement techology is future orientated and easy to handle.
|
|
m3/h, m/s, CO2, %RH, C, DP, Lux
Instrument memory for up to 10,000 measurement values
PC software for analyzing, archiving and documenting the measurement data
IAQ probe, Lux probe and Comfort Probe
Vane measurement and integrated differential pressure probe for Pitot tube measurement
Wireless probes for temperature and humidity |
|
C, %RH, Ctd, g/kg, hPa, m/s, m3/h, ppm CO, ppm CO2, U/min, mA, V
Simultaneous measurement at several measurement locations
Data logger function
Freely usable probe inputs
1 to over 200 measurement channels
Data transfer with the Testo data bus
Modular setup of system components |
|
DTM 550 FEATURES
Temp:-20~ 100
Humidity:0 ~ 100%RH
3 1/2 Digit, Back light display
Use highly accurate RTD temperature sensor
MAX, DATA, HOLD function
Automatic low battery indication
Valox housing to withstand accidental
DTM 550SPECIFICATIONS
Measurement Range: Temp:-20 ~ 100
Humidity: 0 ~ 100%RH
Temp. Accuracy: }0.5-0~50, }1-20 to 0,50 to 100
Humidity Accuracy: }2.5% RH (10% to 90% RH) ;}5% RH (90% RH)
Operating Environment: 0 to 50 at <75% relative humidity
Resolution: Temperature:0.1; Humidity:0.1% RH;
Sensor: Pt385/1000,RTD temperature sensor
General
Power Requirement: 4 pieces 1.5V (AAA size) batteries
Dimensions: 6.7"x1.7"x1.6" (170x44x40mm)
Weight: 6.3 oz(180g)
Accessories: Soft carrying case, batteries, owners manual |
|
| ... products without technical information |
| |
Combination Autoranging multimeter with IR Thermometer
* Non-contact InfraRed thermometer measures surface temperature of objects unsafe to contact or difficult to reach
* InfraRed features 8:1 distance to target ratio with 0.95 fixed emissivity
* Input fuse protection and mis-connection warnings with audible and visible signals
* Auto power off, Data Hold
|
|
Basic multimeters with 8 functions and choice of True RMS model
* Easy to read large backlit display
* True RMS AC measurements (EX411)
* Type K thermometer built-in for surface or air temperature measurements
* Input fuse protection and mis-connection warnings with audible and visible signals
* Data hold freezes display reading
* Ergonomically designed to fit comfortably in your hand
|
|
* Non-contact InfraRed thermometer measures surface temperature of objects unsafe to contact or difficult to reach
* InfraRed features 8:1 distance to target ratio with 0.95 fixed emissivity
* Input fuse protection and mis-connection warnings with audible and visible signals
* Auto power off, Data Hold
* True RMS AC measurements
* Relative function
* Type K thermometer, Capacitance, Frequency, and Duty Cycle
* Complete with CAT III test leads, multi-position tilt stand, hanging strap, holster with test lead storage, bead wire temp probe, and 9V battery |
|
AM-240 The Cost-Saving with Temperature measurement
- Large LCD display with back light
- Auto and manual ranging
- MAX/MIN function
- AC/DC Current 1A up to 10A
- Resistance up to 40MOhm
- Frequency measurement
- Capacity measurement
- Temperature measurement *
- Data Hold
- Diode check
- Audible continuity check
- Auto power off
- Safety: CAT III 600V |
|
ELECTRICIANS DIGITAL MULTIMETER WITH TEMPERATURE RANGE - MM47 - 79.00
The MM47 is the ideal electrician's multimeter. It has been designed to satisfy all the needs of a working electrician by including audible continuity, phase rotation, frequency and temperature measurement as well as the basic electrical functions. Current ranges can be provided by using a suitable clamp adaptor.
The MM47 can be bought as part of a kit together with the CT60 adaptor. |
|
Kontrol Panels
The Kontrol series of panels are compact and easy to use and include all the accessories required for immediate installation:
- Self-calibration of all measurements
- Compact probe holders, complete with flow sensor, flow rate regulating valve and tap for bleeding the liquid.
- Alarm signal to indicate that the water is not flowing,
- Instruments with IP 65 protection level.
- Alarm relay (5 A; 250 Vac)
- 4-20 mA outputs for each parameter measured, with provision for selecting the interval
- Power supply 230 Vac (standard) or 115 Vac (upon request)
- Programmable set points and alarm
- Pump pause function during calibration
- Temperature reading and temperature offset (automatic with optional PT100 probe)
- Adjustments on set point: On/Off, pause/run, proportional by impulse
|
|
| EX900 Kit Complete with ExStik Chlorine meter, pH electrode, ORP electrode, protective sensor cap, 5 packs of 10 reagent tablets (50 tests), 5 plastic sample cups, weighted stand, pH 4, 7 & 10buffer packs, four SR44 button batteries, carrying case, and neckstrap |
|
|
|
see the results for the following category
