|
|
|
|
|
|
Reliable, high-brightness visual indication of process conditions for safe and hazardous areas from RTK Instruments Ltd
The DA180 range of Giant LED Clusters, having a 66mm diameter lens, not only provides clear indication from a distance but is also visible from the side. Lenses are available in six super-bright colours and feature an integral current regulator to limit the current to 20mA. This ensures that all colours are matched to obtain consistent brightness across the range including white and blue. Up to two LED Clusters can be driven from a single IIC power source. The lamps are designed to provide a minimum of 100,000 hours of service life.
The DA180 Giant LED Clusters are ATEX Certified to Ex II 2G, EEx ia IIC T4 and are suitable for zones 1 and 2.
The LED Clusters can be supplied as loose parts or pre-mounted in a stainless steel or polycarbonate IP65 box ready for immediate installation on site.
The DA180 range of Giant LED Clusters can be linked into either the LN1000 Intrinsically Safe Alarm Annunciator or one of a number of safe area annunciators.
With the LEDs lower power consumption, low heat dissipation and long life expectancy, the DA180 is an ideal indicator for safe and hazardous areas alike.
|
|
The DA170 range of LED Clusters provides visual on/off indication of process conditions in safe and hazardous areas. Available in six super-bright colours - red, green, yellow, orange, blue and white - they are standard 22.5mm diameter and seal to IP65 to the panel door.
All six colours are fully current limited and take only 20mA. All are matched for equal brightness including the white and blue versions.
In hazardous areas it is possible to combine LEDs from a single Intrinsically Safe interface, two for IIC interfaces and four with a IIB interface.
The standard LED Cluster can also be supplied fully mounted in stainless steel boxes ready for immediate mounting on-side.
With the LEDs lower power consumption, lower heat dissipation and far greater life expectancy the DA170 is an ideal standard indicator for safe and hazardous areas alike.
|
|
IS-L101L L.E.D Beacon
► Zone 0, 1 & 2 Intrinsically safe
► Ex ia IIC T4 (Tamb.-40 to +60C)
► Alarm accept function (with IS-A105N)
► Can be combined with the IS-A105N alarm
► Sealed to IP66
► ATEX, FM, IECEx
|
|
The Spectra range has been designed to offer a complete visual signalling solution for industrial, marine and general applications.
The High output LED multifunction beacon is available in two sizes and allows to choose from a total of 9 user selectable operation modes:
- 4 rotating configurations
- 4 flashing configurations
- Steady mode for status applications
E2Ss wide range of beacons also includes :
- Halogen rotating beacon
- 5J Xenon strobe beacon
- Synchronised Xenon strobe beacon
- Multi-flash-frequency Xenon strobe beacon
- Halogen flashing / status beacon
- Filament lamp flashing / status beacon.
- Different sizes and a range of accessories including wall brackets and pole mounts are available.
|
|
|
|
|
|
|
Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available in several versions with various levels of operating voltage and and various signallingcolours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the electronic and the mounted halogen lamp, consists of a transparent Makroloncap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured in non corrosive materials.
|
|
|
|
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
ActiveLine is designed to indicate various operating states of machines and systems. The possible signalling colours green, yellow, red, blue and white are all shown in one single light element. Each colour can be preset to continuous light, blink light or flash light. The light is generated by use of lightemitting diodes. The model with sounder can also generate a penetrating signalling tone, with four adjustable sound levels.
The plastic housing, the stable foot and the sounder housing are made of impact-resistant thermoplastic. The cap consists of im-pact-resistant polycarbonate, and the stand-tube is made of aluminium.
|
|
The NE series dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 57mm diameter.
* Available in 24V DC (No polarity).
* Colors available in red, amber, green, blue and clear/white.
* Water and dust-tight IP65 construction.
* Dome is visible from top and sides.
* NPN/PNP open collector compatible.
* Terminal block allows easy wiring.
|
|
The PEW/PES dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 82mm diameter.
* Available in 24V AC/DC, 100V AC and 200V AC versions.
* Dome is visible from top and sides.
* PEW-B type includes single-tone intermittent alarm with adjustable volume to 85dB at 1m.
* Colors available: red, amber, green and blue.
* Flashing function available in three different flash rates: 60 fpm, 120 fpm, 180 fpm.
* NPN open collector compatible.
* PEW: Meets IP54
PES: Meets IP23 (IP55 with optional rubber gasket SZ-210).
|
|
General Information
Deep base LED beacon designed to complement audible alarms in areas where people may may be present who are hard of hearing or where high ambient noise levels may exist. LED technology provides an excellent combination of brightness and low current consumption. Deep base supports rear or side entry cables
High brightness
Low profile design
Low current consumption
Simple to install
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x D80
Weight (KG): 0.15
ANA Number: 5018986425354
Cable Entry: Rear or side
IP Rating: IP65
Vandal Resistant: No
Current Consumption: 3 - 6 mA depending on setting
|
|
The RKE/RHE series LED revolving warning light provides increased visibility and long service life with high power LED.
* Size: 100mm diameter.
* Available in 12V DC, 24V DC, 100V AC and 200V AC versions.
* Colors available: red, amber, green and blue.
* RKEB/RHEB series has an integral alarm (high-pitch tone 90dB at 1m).
* No bulb replacement needed with long service life LED, perfect for "hard-to service" locations.
* Dome is made of heat and shock resistant polycarbonate resin.
* IP23 (IP55 with optional rubber gasket SZ-200A).
|
|
The RFV series is a combination of LED rotating beacon light and MP3 programmable sound unit
* Available in 24V DC, 100V AC and 220V AC
* Volume is adjustable from 0 to 95dB (at 1m)
* Colors available: red and amber
* Units are shipped completely pre-wired and pre-assembled
* Voice message or sound data is field-programmable with SD card (SD card
is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 4
channels by bit input or 15 channels by binary input
Available by Special Order
* PNP open collector transistor type
|
|
General Information
Low profile LED beacon designed to complement audible alarms in areas where people may may be present who are hard of hearing or where high ambient noise levels may exist. LED technology provides an excellent combination of brightness and low current consumption
High brightness
Accepts side entry or surface cables
Low current consumption
Simple to install
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x D53
Weight (KG): 0.1
ANA Number: 5018986425347
Cable Entry: Rear
IP Rating: IP54
Vandal Resistant: No
Current Consumption: 3 - 6 mA depending on setting
|
|
The KHE Series is a multi-feature LED beacon with three selectable light patterns for diverse use. The clear lens makes it easier to see the light in bright ambient conditions.
* Size: 100mm diameter.
* Available in 24V DC (no polarity)
* Dome is visible from top and sides.
* Colors available: red, amber, green and blue.
* Lighting patterns available: simulated rotation, strobing and flashing
* Super bright LEDs provide long service life, maintenance-free operation.
* IP23 (IP65 with SZ-200A optional rubber gasket)
|
|
|
It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The signalling light is available in four different cap colours.The modern electronics are mounted on a printed circuit board of glass fibre reinforced epoxy resin. The weather-proof coated aluminium die- kast housing is equipped with a ribbed cap of impact-resistant plexiglass. The signalling light is provided with a M20 cable gland for cable diameters of 8 to 12 mm. Three modes (continous, blinking and flash light) are switchable.
|
|
Fires of regularization of the traffic
Plastic fire of high-quality resisting to UV
The reflectors and the lenses are sealed by a joint neoprene.
Diameter of the lenses: 200 mm
Luminous power 60 Watts
Tension: 230 V
1 element: 2 kg L 460 L 260. 335 mm
2 elements: 3,2 kg L 460 L 260. 670 mm
3 elements: 4,7 kg L 460 L 260. 935 mm
|
|
Fire handling is ideal for indication on the machine tools, overhead travelling cranes,
The glass casing is out of orange polycarbonate.
Fire handling is equipped with a double lens of FRESNEL.
Protection against the inversion of polarity.
High index of protection: IP 54
Fixings: 3 bolts, tubes or bases magnetized.
Connection by connector blocks in the base.
Dimensions: High 121 mm, diam. 130 Misters.
O ring between the base and the dome.
Exist in various colors, orange, red, blue, green, transparency and white.
Lamp with Xenon 1.5 joules, longevity: 3 million flashes
The number of glares per minute for a tension of 50V is of 70 Flashes per minutes
Joint anti-vibration included
|
|
|
|
|
|
Werma has a vast range of LED beacons with different light signals e.g. permanent light, blinking light and flashing light. Furthermore there is a wide choice of sizes, colours, voltages and fixings available e.g. base mounting, tube mounting and bracket mounting.
This year (2009) a groundbreaking innovation in LED technology has opened up a completely new dimension in optical signalling. Enhanced Visibility System,or the electronic improvement of visibility, EVS for short, is the name WERMA has given to this latest development which promises to bring about a revolution in signalling technology. WERMA employs light emitting diodes for the EVS system. A microprocessor generates random light signals. This gives the light a very "agitated" character which proves highly effective in drawing attention.
Countless uses can be found in the industrial sector, public areas or warehouses.
The LED rotating beacon provides an intensive rotating signalling effect. These LED rotating beacons can provide extremely high light intensity up to 70 cd with low power consumption and high vibration resistance.
|
|
IBL-IBM-IBS
# IBL-IBM-IBS LED-steady-/flashing beacon
# versatile usable panel mount beacon series
# 3 sizes 65 - 45 - 30 mm diameter
# selection of stead-/flashing function via terminal
# maintenance free - long lifetime
# PLC fit (leakage/inrush current)
# particular lens pattern for optimum light dispersion
# adapter for 30,5 mm bore holes
|
|
NFS - 90 mm
# 90mm LED strobe/double strobe beacon
# very good brightness - highest optical efficiency
# specially designed and optimized lens/optics
# up to date LED-technology
# absolutely shock and vibration proof, maintenance free
# long life time approx. 50.000h
# low nominal current
# inrush current limitation, EMC safe, leakage up to 3mA possible
# modular design - mounting options horizontal, vertical and pole
|
|
Range OPTASON: AE&T proposes a broad range of powerful and economic luminous indicators to you to meet your needs for indication in industrial environment: indication of defects, dangers, states, information, etc
Flexible range, you will find many technologies (Led, Flash Xenon, bulb incandescence) and many solutions (encastrables, turnings, angle jigs, etc) to answer the whole of your needs.
Lastly, the high index of protection and the long life of life of our products guarantee to you solutions adapted to your environment and your constraints.
Range:
O50: mini indicator encastrable
Led
Fix, flickering
O100: indicator encastrable
Incandescance, Led, Flash
Fix, flickering
0200/O300/O400: flat-bottomed indicator with accessories of fixing (foot/square)
Incandescance, Led, Flash
Fix, flickering
O350: indicator of indication with fixing angle
Incandescence, Led
Fixed
0300T/O400T: revolving fire
MBL/MB: seeing for very severe environments
|
|
|
|
|
|
Get the attention you need with LKEH series signal tower with voice message/audible alarm hybrid unit.
* Available in voice message type (LKEH-FV) and 32 pre-recorded sounds type (LKEH-FA/FC/FD/FE)
* Size: 100mm diameter
* Available in 24V DC, 100V AC and 220V AC versions
* Volume is adjustable from 0 to 105dB at 1 meter
* Continuous or flashing light
* Colors available: red, amber, green, blue and clear/white
* LED modules are interchangeable and stackable after purchase (up to 4 modules)
* Units are shipped completely pre-wired and pre-assembled
LKEH-FV (Voice synthesizer)
* Voice message or sound data is field-programmable with SD card (SD card is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 5
channels by bit input or 31 channels by binary input
LKEH-FA/FC/FD/FE (32 pre-recorded sounds)
* 32 sounds are pre-recorded in one unit. 4 sound types are available
* Select one sound group to play back 8 sounds by bit input or 32 sounds can be played back by binary input
Available by Special Order
* PNP open collector transistor type
|
|
The IS-mC1 combined alarm sounder & L.E.D. beacon has been designed for installation in intrinsically safe environments (Zone 0). The IS-mini range also includes stand alone intrinsically safe alarm sounders and L.E.D. beacons and is definitely the most effective method of signalling in Zone 0.
Features:
- Zone 0, 1 & 2
- EEx ia IIC T4 (Tamb.-40 to +60C)
- Maximum 100dB(A) output
- 49 alarm tones, 3 alarm stages
- Array of 6 high intensity L.E.D's
- Sealed to IP65
- ATEX, FM, IECEx
|
|
General Information
Weatherproof, combined sounder and LED beacon designed for use in applications where both audible and visual fire warning is required such as areas where the occupants may be hard of hearing or visually impaired such as in nursing homes. LED technology offers high brightness with low current consumption
LED technology
Weatherproof
Low current consumption
Specification
Brand: Menvier
Dimensions (mm): Dia 95 x 109D
Weight (KG): 0.3
ANA Number: 5018986425378
Cable Entry: Rear or side
IP Rating: IP65
Vandal Resistant: No
Sound Output Db(A) at 1m (+/- 2): 101 (+/-3)
Current Consumption: 20mA
|
|
The EDLM (3 color LED) and EDWM (5 color LED) are innovative LED signal towers with pressure and flame-proof housing designed specifically for use in potentially flammable and explosive atmospheres, such as chemical, petrochemical, mineral/natural gas production, food industries and combustible dusts.
* Zone1, 2 (II2G Ex d IIC T6) and Zone21, 22 (II2D Ex tD A21 IP66 T80C)
certified.
* Available in 3 color LED (EDLM) and 5 color LED (EDWM) style.
* Super bright LEDs provide long service life, maintenance-free operation.
* Flashing and/or continuous lighting
* Wall mount, flush mount and horizontal mount possible with supplied
mounting
@@ brackets.
* IP66
|
|
The LN870 Light Tower provides visual on/off indication of process conditions in safe and hazardous areas. Configurable up to five tiers high in a choice of five super-bright colours (red, amber, green, blue and white), they can be built exactly the way you want.
Each tier has a unique prism cut lens and internal reflective cone to improve visibility and requires one LED lamp for illumination which is current-limited to take a maximum of only 2OmA. Available for hazardous area use in both zones 1 and 2, up to two tiers can be driven from a single IIC interface.
There is a choice of pole or direct mounting, both incorporating a special vibration absorber. With the LED's low power consumption, low heat dissipation and long life expectancy, the LN870 is an ideal indicator for safe and hazardous areas alike.
|
|
|
The Skyline Alpha series is based on a rubber housing with a transparent or red plastic cap. The six diode strips each with eight horizontally alligned LEDs exceed the minimum requirements of the ICAO of 10 cd explicit without dazzling. The Skyline Alpha 1 is the standard version without additional fastening material and can be mounted on stationary surfaces. Alpha 2 is pre-mounted on a mounting bracket and equipped with a 1-metre cable. The version Alpha 3 is also equipped with a mounting bracket and has an additional connecting box for simple and economic installation. For operation on masts, or at places where double safety is required, the design Alpha 4 is provided. This obstacle light has two lamps pre-mounted on a double arm and is easy to install by means of a connecting box. All designs are available with either a red or transparent cap with red LEDs.
|
|
The LCE series offers the latest in LED technology.
Versatile and energy efficient.
* Size: 40mm diameter.
* Available in 24V AC/DC and "Free-Voltage" 90-250V AC versions.
* FB types include two selectable, single-tone intermittent alarms with adjustable volume to 85dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* Units are shipped completely pre-wired and pre-assembled.
* Pole mount versions include 300mm steel pole and mounting bracket (SZ-012) with nuts and washers.
* NPN or PNP open collector compatible (24V type), and NPN open collector compatible (90-250V type).
* LCE-FB & LCE-FBW: Meet IP54
LCE-W: Meets IP65.
* Optional mounting brackets available.
LCE-U type
* Available in 24V AC/DC only.
* Silver color body.
* Versatile and flexible 3 meter jacketed cable.
|
|
The MP series super slim 30mm silver color body signal tower is ideal for small devices.
* Size: 30mm diameter.
* Short body length type is also available (MPS).
* Available in 24V AC/DC.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* NPN or PNP open collector compatible.
* Water and dust-tight IP65 construction.
* Units are shipped completely pre-wired and pre-assembled.
|
|
|
|
